Inter chiller who makes one for the 6th gen

1le32907 · 02-17-2018, 07:45 PM

Looking for an inter chiller for the 6gen for a whipple wanna really keep my iat down any recommendations?

laynlo15 · 02-17-2018, 08:18 PM

google it, there are a bunch. Weapon x makes one also.

brettman · 02-17-2018, 08:40 PM

look at the killer chiller.

1le32907 · 02-17-2018, 09:00 PM

Are they specific for the 6th gen or universal

brettman · 02-17-2018, 10:45 PM

I read somewhere on here, that they installed it on a Gen6. Just can't find it again. Was a good write up. With luck they will pop on, and point it out.

1le32907 · 02-17-2018, 11:23 PM

Cool I’ll check them out being in Florida and having this I think is a smart move just not sure if car has to be re tuned for it

Atomic Ed · 02-18-2018, 10:04 AM

Active Interchiller in Pinellas Park FL has been looking for a 6 Gen Camaro to do prototype, custom fit, work on for quite some time now. These kits are quite popular with the Cadillac folks and seem to be high quality. If I wasn't clear across the nation, I would hand my Camaro over to him.

Contact Dave at Interchiller@tampabay.rr.com 727-656-1422

TrekGTO · 03-03-2018, 06:33 AM

Quote:

Originally Posted by 1le32907

Looking for an inter chiller for the 6gen for a whipple wanna really keep my iat down any recommendations?

Quote:

Originally Posted by 1le32907

Cool I’ll check them out being in Florida and having this I think is a smart move just not sure if car has to be re tuned for it

Quote:

Originally Posted by Atomic Ed

Active Interchiller in Pinellas Park FL has been looking for a 6 Gen Camaro to do prototype, custom fit, work on for quite some time now. These kits are quite popular with the Cadillac folks and seem to be high quality. If I wasn't clear across the nation, I would hand my Camaro over to him. Contact Dave at Interchiller@tampabay.rr.com 727-656-1422

No tune required, we have all the CNC Fittings ready for all the 16+ GM platforms just need R134 volunteer cars to fit first kits on. We invented automatic H/E bypass and Competition or Track Mode in 09, no Oetiker clamps or Freon Hoses cut on any kits since we started.

1le32907 · 03-03-2018, 08:20 AM

Quote:

Originally Posted by TrekGTO

No tune required, we have all the CNC Fittings ready for all the 16+ GM platforms just need volunteer cars to fit first kits on. We invented automatic H/E bypass and Competition or Track Mode in 09, no Oetiker clamps or Freon Hoses cut on any kits since we started.

I’m raising my hand here I’d love to pick up an interchiller just tell me when and where to go as I’m in Florida!!!!!!

Daves1SS · 03-03-2018, 10:19 AM

^^^ that worked out well! If not, I have Joe Kincaids killer chiller on mine, and I wrote the installation instruction manual for our cars that is on his website.

1le32907 · 03-03-2018, 12:58 PM

Quote:

Originally Posted by Daves1SS

^^^ that worked out well! If not, I have Joe Kincaids killer chiller on mine, and I wrote the installation instruction manual for our cars that is on his website.

My coolant code isn’t compatible with active if killer chiller will work with mine I’m game

Daves1SS · 03-04-2018, 08:23 AM

Quote:

Originally Posted by 1le32907

My coolant code isn’t compatible with active if killer chiller will work with mine I’m game

Your......coolant code? Huh?

Atomic Ed · 03-04-2018, 04:48 PM

Needs to be 134a refrigerant, not the 1234yf in some of the new cars. There seems to be a move to the newer, propane based refrigerant.

TrekGTO · 03-04-2018, 05:24 PM

Quote:

Originally Posted by Atomic Ed

Needs to be 134a refrigerant, not the 1234yf in some of the new cars. There seems to be a move to the newer, propane based refrigerant.

Every car should have a sticker under hood to identify refrigerant and quantity.

02-17-2018, 07:45 PM	#1
1le32907 Drives: Summit white 1le ss Join Date: Feb 2017 Location: Palm Bay, fl Posts: 574	Inter chiller who makes one for the 6th gen Looking for an inter chiller for the 6gen for a whipple wanna really keep my iat down any recommendations?

02-17-2018, 08:18 PM	#2
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	google it, there are a bunch. Weapon x makes one also. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

02-17-2018, 08:40 PM	#3
brettman Drives: 2016 Camaro SS Join Date: Mar 2017 Location: Cleveland, Ohio Posts: 912 View My Garage	look at the killer chiller. __________________ 2016 Camaro 1SS, Red Hot, K&N Blackhawk intake, Whipple Supercharger, 3.125 pulley, Kooks 2" long tube headers, High flow cats, secondary cats delete, Mishimoto catch can, P3gauge, Lots of dress-up crap that don't make it go any faster. Car Journal http://www.camaro6.com/forums/showthread.php?t=490975 SC build http://www.camaro6.com/forums/showthread.php?t=492656 Drive, Ride, Fly It Like You Stole It GO BIG OR GO HOME

02-17-2018, 10:45 PM	#5
brettman Drives: 2016 Camaro SS Join Date: Mar 2017 Location: Cleveland, Ohio Posts: 912 View My Garage	I read somewhere on here, that they installed it on a Gen6. Just can't find it again. Was a good write up. With luck they will pop on, and point it out. __________________ 2016 Camaro 1SS, Red Hot, K&N Blackhawk intake, Whipple Supercharger, 3.125 pulley, Kooks 2" long tube headers, High flow cats, secondary cats delete, Mishimoto catch can, P3gauge, Lots of dress-up crap that don't make it go any faster. Car Journal http://www.camaro6.com/forums/showthread.php?t=490975 SC build http://www.camaro6.com/forums/showthread.php?t=492656 Drive, Ride, Fly It Like You Stole It GO BIG OR GO HOME

03-03-2018, 10:19 AM	#10
Daves1SS Drives: 2016 Camaro 1SS Join Date: Jan 2016 Location: Pelham, AL Posts: 406	^^^ that worked out well! If not, I have Joe Kincaids killer chiller on mine, and I wrote the installation instruction manual for our cars that is on his website. __________________ 2016 Nightfall Gray Metallic 1SS 6MT, Edelbrock E-force supercharged, Killer Chiller with 3-way bypass, catch can *FOR SALE, MESSAGE ME IF INTERESTED* Previous: '12 Mustang GT 6MT (12.47 @ 115.88) '09 G8 GT (11.86 @ 120.47) '05 GTO 6MT (slow, lol) '01 Grand Prix GTP converted to turbo, high 11's

02-17-2018, 09:00 PM	#4
1le32907 Drives: Summit white 1le ss Join Date: Feb 2017 Location: Palm Bay, fl Posts: 574	Are they specific for the 6th gen or universal

02-17-2018, 11:23 PM	#6
1le32907 Drives: Summit white 1le ss Join Date: Feb 2017 Location: Palm Bay, fl Posts: 574	Cool I’ll check them out being in Florida and having this I think is a smart move just not sure if car has to be re tuned for it

02-18-2018, 10:04 AM	#7
Atomic Ed Drives: 2001 Audi TT, 2016 Camaro Join Date: May 2016 Location: Eastern Washington Posts: 833	Active Interchiller in Pinellas Park FL has been looking for a 6 Gen Camaro to do prototype, custom fit, work on for quite some time now. These kits are quite popular with the Cadillac folks and seem to be high quality. If I wasn't clear across the nation, I would hand my Camaro over to him. Contact Dave at Interchiller@tampabay.rr.com 727-656-1422

03-04-2018, 04:48 PM	#13
Atomic Ed Drives: 2001 Audi TT, 2016 Camaro Join Date: May 2016 Location: Eastern Washington Posts: 833	Needs to be 134a refrigerant, not the 1234yf in some of the new cars. There seems to be a move to the newer, propane based refrigerant.

User Name		Remember Me?
Password