Cup Holder LED lighting - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

miltp · 02-27-2011, 12:37 PM

Yellow were through ???? Exactly

The Stig · 02-27-2011, 12:47 PM

Quote:

Originally Posted by miltp

Yellow were through ???? Exactly

Pop off the four gauge pack. The yellow wire is going to the gauges. It is the power wire for the ambient lighting.

Camaro4Life2011 · 04-08-2011, 04:30 PM

thanks so much appreciate it!!!

What leds are you guys using?

The Dark Knight · 04-08-2011, 04:54 PM

That reminds me of the Charger I got as a rental. They have a LED lighting in the cup holder too.

joeblow · 04-08-2011, 10:01 PM

Quote:

Originally Posted by 2010Bill

I found these surface mounted LEDs and have them on order. They appear to be a little smaller than the ones from PepBoys.

http://www.oznium.com/prewired-surface-mount-led

It will be another ten days or so before they're in. Details would be great.

Thanks in advance for your help.....

Bill

Oznium has great quality LEDs...i bought some from them some years back for my guitar pedal board. Easy installation, very bright and havent even began to fade yet and i light them up almost everyday!

tomlink · 04-09-2011, 06:05 PM

Quote:

Originally Posted by recontango

So if you tap into the yellow and black wires in the TC switch it will come on and off with the lights? And can be dimmed?

Very Cool.

I used those wires and it looks great. It comes on and dims with the ABL in the doors and the dash. Plus those are very easy to get to.

rdblan2 · 07-16-2011, 04:46 PM

Quote:

Originally Posted by tomlink

I used those wires and it looks great. It comes on and dims with the ABL in the doors and the dash. Plus those are very easy to get to.

Just finished mine the same way. Just an FYI, for anyone using those lights from pepboys (the led spots on the first page) when you cut off the adapter to get at the wires, there is a "hot" and ground wire in each strand. Meaning, there is a blue and ground going to one led, and a red and ground going to the other. Twist the blue and red together and tap that into the yellow wire off the TC switch. The two grounds get twisted together and go to the black wire off the TC button. The wires are tiny so I twisted them together a few times to ensure the t tap made a good connection. Super quick mod.

BrandonB956 · 07-07-2012, 10:32 PM

I have a couple of questions
where can i find this cup holder cover? I checked hi tech customs store and couldn't find anything

and
How do the oznium leds come? Are they already in a line together or a they each separate? If they are separate how would I connect them ?

GQ4Life · 07-09-2012, 05:12 PM

About to start this now.. just looking for 3mm flat wide angle lens in blue that matches better.. I got to work out the wave of the color nM

red_johnny · 07-10-2012, 10:01 AM

I am about to do this too. I want to get the Oznium lights but I don’t know which to get. I see there are several options such as one on each side or a strip on each side. Which would work best to light it up the most? I may wait to do this until I can afford to buy a gauge cluster pack so that way I have the dimmable wire to affix to.

jlugo · 07-10-2012, 10:46 AM

[QUOTE=BrandonB956;5253136]I have a couple of questions
where can i find this cup holder cover? I checked hi tech customs store and couldn't find anything
and
How do the oznium leds come? Are they already in a line together or a they each separate? If they are separate how would I connect them

I got mine on eBay and the Led's from 'Oznium'...

http://www.ebay.com/itm/2010-2011-CAMARO-LT-LS-SS-BILLET-INTERIOR-CUP-HOLDER-BEZEL-TRIM-STAINLESS-STEEL-/230823329359?fits=Model:Camaro&hash=item35be247e4f &item=230823329359&pt=Motors_Car_Truck_Parts_Acces sories&vxp=mtr

GQ4Life · 07-10-2012, 01:02 PM

Quote:

Originally Posted by red_johnny

I am about to do this too. I want to get the Oznium lights but I don’t know which to get. I see there are several options such as one on each side or a strip on each side. Which would work best to light it up the most? I may wait to do this until I can afford to buy a gauge cluster pack so that way I have the dimmable wire to affix to.

Well i ordered rectangle LEDs (2mm x 5mm x 7mm ) to light it up. Will use resistors to lower voltage if i have to.

red_johnny · 07-10-2012, 01:26 PM

Quote:

Originally Posted by jlugo

I got mine on eBay and the Led's from 'Oznium'...

Did you use the same LEDs for the cup holder and the foot well lighting? Thanks!

red_johnny · 07-10-2012, 01:41 PM

Quote:

Originally Posted by GQ4Life

Well i ordered rectangle LEDs (2mm x 5mm x 7mm ) to light it up. Will use resistors to lower voltage if i have to.

I was going to wire off of the gauges (yellow wire) so they could dim or at least turn on/off with them.

04-08-2011, 04:30 PM	#45
Camaro4Life2011 Drives: Black Camaro 2LT RS with Sunroof Join Date: Jul 2010 Location: New Jersey Posts: 257 View My Garage	thanks so much appreciate it!!! What leds are you guys using? __________________ 2011 Blk on Blk 2LT [x] Perma-grin [x]1000 Watt Dual 12'' Subs (******** Harness) [x]Blacked out Bow-ties [x]AACStyle Blue Footwell Lights. [x]AACStyle Blue LED Dome Light. [x]AACStyle Blue LED Trunk Light [x]Knight Rider 54 Blue LED [X]Valentine 1 Hard Wire [X]Valentine 1 Concealed Display [ ]20 %Tinted Windows [ ]LED Underglow [ ]Rear Footwell Lights [ ]ABL Extension [ ]Camaro RS Projection [ ]Painted Calipers [ ]Glove Box Light [ ]Door Handle Lights [ ]Cold Air Inductions CAI [ ]AACStyle Plasma DRL [ ]AACStyle License Plate LEDS

04-08-2011, 04:54 PM	#46
The Dark Knight Batmobile in Disguise Drives: 2009 Pontiac G8 Join Date: Aug 2008 Location: Upland, Ca Posts: 2,080	That reminds me of the Charger I got as a rental. They have a LED lighting in the cup holder too. __________________

07-07-2012, 10:32 PM	#50
BrandonB956 Drives: RS (11/15/10) Join Date: Mar 2010 Location: Baton Rouge,LA Posts: 574	I have a couple of questions where can i find this cup holder cover? I checked hi tech customs store and couldn't find anything and How do the oznium leds come? Are they already in a line together or a they each separate? If they are separate how would I connect them ? __________________ *TEAM LLT* Nov.15th 2010 -- Check out my build thread http://www.camaro5.com/forums/showthread.php?t=116235

07-09-2012, 05:12 PM	#51
GQ4Life Drives: 2010 Camaro SS LS3 Join Date: Aug 2009 Location: Fishkill, NY Posts: 5,211 View My Garage	About to start this now.. just looking for 3mm flat wide angle lens in blue that matches better.. I got to work out the wave of the color nM __________________ 2015 Corvette Z06.. Lime Rock Park 1:01; Watkins Glen 2:14; Thompson Speedway 1:21

07-10-2012, 10:46 AM	#53
jlugo Account Suspended Drives: 2014 1LE 'Summit White' Join Date: Jul 2009 Location: Temple, Texas Posts: 2,351 View My Garage	[QUOTE=BrandonB956;5253136]I have a couple of questions where can i find this cup holder cover? I checked hi tech customs store and couldn't find anything and How do the oznium leds come? Are they already in a line together or a they each separate? If they are separate how would I connect them I got mine on eBay and the Led's from 'Oznium'... http://www.ebay.com/itm/2010-2011-CAMARO-LT-LS-SS-BILLET-INTERIOR-CUP-HOLDER-BEZEL-TRIM-STAINLESS-STEEL-/230823329359?fits=Model:Camaro&hash=item35be247e4f &item=230823329359&pt=Motors_Car_Truck_Parts_Acces sories&vxp=mtr Attached Images

02-27-2011, 12:37 PM	#43
miltp Jim Pappas Drives: Rally Yellow 2SS/RS,Auto,G/X Join Date: May 2009 Location: Saugerties, N.Y. Posts: 402 View My Garage	Yellow were through ???? Exactly

07-10-2012, 10:01 AM	#52
red_johnny Drives: 2016 Gray 2SS M6 Join Date: Jun 2012 Location: Hermitage, PA Posts: 753 View My Garage	I am about to do this too. I want to get the Oznium lights but I don’t know which to get. I see there are several options such as one on each side or a strip on each side. Which would work best to light it up the most? I may wait to do this until I can afford to buy a gauge cluster pack so that way I have the dimmable wire to affix to.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
cup holder lighting	bmwdon	Cosmetics and Lighting Modification Discussions	47	10-10-2010 12:36 AM
Billet Cup Holder Insert Polished, Satin or Black Anodized!!!	BilletCustom	Interior Parts & Accessories	20	01-10-2010 09:41 PM
Elbow in the cup holder	Recluse	5th Gen Camaro SS LS LT General Discussions	35	12-21-2009 11:09 AM
LED Interior and Exterior Lighting.	SummoneR	Cosmetics and Lighting Modification Discussions	101	08-17-2009 09:01 PM