BMR 5"intake and heat shielding. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Black Market Racing · 04-24-2015, 06:35 PM

We have just finished our prototype 5" air intake and heat shielding designed to fit the 102mm big throttle body upgrade. We had a test car in here for a bit but unfortunately the client sold the car before we could do a final test fit. If anyone in the Phoenix area is around, we would like to test fit it on your car. We would need your car for 2 to 3 hours. If you want the air intake, we will sell it to you at wholesale, and throw in a dyno run to see where your ride is at. Also, if your thinking of adding the 102mm throttle body, shoot me a PM and I will get you pricing with free install. Lemme know!

PWRHSEZL1 · 04-25-2015, 12:17 AM

I'm not in Arizona, but I'm am interested and would like to see the final product!

KaBoom1701 · 04-25-2015, 11:00 AM

Why don't you use your ZL1 for this testing?

Black Market Racing · 04-27-2015, 12:13 PM

Quote:

Originally Posted by KaBoom1701

Why don't you use your ZL1 for this testing?

We not longer have a ZL1 in the shop. We work on a lot of CTS-Vs. Our intake system has been a huge success with the Vs. Same motor, we just want to make sure we didn't miss anything in the fit and finish area before production.

Black Market Racing · 04-27-2015, 12:14 PM

Quote:

Originally Posted by PWRHSEZL1

I'm not in Arizona, but I'm am interested and would like to see the final product!

As soon as it is ready for production, I will post dyno numbers along with product photos.

Black Market Racing · 04-27-2015, 12:15 PM

Quote:

Originally Posted by SSLOMARO

Any pics ? Interested

Pics are soon to follow as soon as we confirm final fit and finish.

Black Market Racing · 05-04-2015, 08:43 PM

The final product will be powder coated. Once again, we are looking for a local ZL1 owner to come on by and let us test fit this unit before we go into production. If you would like to keep the intake, we will sell it a sponsorship price and throw in a FREE dyno pull so we can see the before and after gains. Please PM me if you are interested. Name: Camaro 5 intake.jpg
Views: 792
Size: 67.9 KB

Name: Camaro 5 intake.jpg
Views: 792
Size: 67.9 KB

Black Market Racing · 05-07-2015, 11:03 PM

Here are a few pictures while we were doing the fab work. A cool new coolant reservoir as well. I think both of these will compliment the engine bay nicely! What do you guys think?

Redlineviper · 05-08-2015, 03:33 AM

Although the tape is a fast easy way to do the install..... I think bolts and brackets are the way to go.

Trackman · 05-08-2015, 08:50 AM

Didn't we see these pictures two months ago?

GenF-GTS · 05-08-2015, 08:56 AM

Quote:

Originally Posted by Trackman

Didn't we see these pictures two months ago?

This one?...from 2 months ago

https://instagram.com/p/znVUpbuAuU/

2013 ZL1 #7860 · 05-08-2015, 09:56 AM

What is being accomplished with that heat shield?

Black Market Racing · 05-08-2015, 12:44 PM

Haha. We love all the criticism. As you can see from the finished prototype the filter is completely covered, blocking the hot air from the engine bay. It will be completely welded for production and also powder coated. Also with the ABS material the intake tube is made from, it does not get heat soaked like aluminum/SS intake material.

Yes the fab pictures were a repost. Just wanted to give any new viewers an idea of where both fit in the car for the new subscribers. We think the tape holds up pretty well. Easily replaceable.

Obviously the tank will be bolt in.

I think we have someone locked down for a final test fit!

Trackman · 05-09-2015, 12:44 AM

Quote:

Originally Posted by Black Market Racing

Haha. We love all the criticism. As you can see from the finished prototype the filter is completely covered, blocking the hot air from the engine bay. It will be completely welded for production and also powder coated. Also with the ABS material the intake tube is made from, it does not get heat soaked like aluminum/SS intake material.

Yes the fab pictures were a repost. Just wanted to give any new viewers an idea of where both fit in the car for the new subscribers. We think the tape holds up pretty well. Easily replaceable.

Obviously the tank will be bolt in.

I think we have someone locked down for a final test fit!

It's also blocking half the surface area of the filter making that area basically useless.

04-24-2015, 06:35 PM	#1
Black Market Racing Drives: Yours Join Date: Mar 2015 Location: United States Posts: 223	BMR 5"intake and heat shielding. We have just finished our prototype 5" air intake and heat shielding designed to fit the 102mm big throttle body upgrade. We had a test car in here for a bit but unfortunately the client sold the car before we could do a final test fit. If anyone in the Phoenix area is around, we would like to test fit it on your car. We would need your car for 2 to 3 hours. If you want the air intake, we will sell it to you at wholesale, and throw in a dyno run to see where your ride is at. Also, if your thinking of adding the 102mm throttle body, shoot me a PM and I will get you pricing with free install. Lemme know!

04-25-2015, 12:17 AM	#2
PWRHSEZL1 Drives: 2013 Camaro ZL1 #2419 Join Date: Jan 2013 Location: Weatherford, Tx Posts: 289 View My Garage	I'm not in Arizona, but I'm am interested and would like to see the final product! __________________ Forged LSA 672 RWHP 712 FT/LBS TQ! The never ending story of I want more power!!

04-25-2015, 11:00 AM	#3
KaBoom1701 KaBoom1701 Drives: 13' ZL1 Red M6 Join Date: Dec 2012 Location: I.E. SoCal (Yucaipa) Posts: 8,630	Why don't you use your ZL1 for this testing? __________________ Mods: Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats.

05-08-2015, 03:33 AM	#9
Redlineviper Drives: 2013 ZL1 Join Date: Jan 2015 Location: Orlando Posts: 936	Although the tape is a fast easy way to do the install..... I think bolts and brackets are the way to go. __________________ 2013 A6 ZL1 Last edited by Redlineviper; 05-08-2015 at 07:22 AM.

05-04-2015, 08:43 PM	#7
Black Market Racing Drives: Yours Join Date: Mar 2015 Location: United States Posts: 223	Quick pic of the prototype intake. It's ready to bolt up, ready to make power! The final product will be powder coated. Once again, we are looking for a local ZL1 owner to come on by and let us test fit this unit before we go into production. If you would like to keep the intake, we will sell it a sponsorship price and throw in a FREE dyno pull so we can see the before and after gains. Please PM me if you are interested.

05-07-2015, 11:03 PM	#8
Black Market Racing Drives: Yours Join Date: Mar 2015 Location: United States Posts: 223	Here are a few pictures while we were doing the fab work. A cool new coolant reservoir as well. I think both of these will compliment the engine bay nicely! What do you guys think?

05-08-2015, 08:50 AM	#10
Trackman Drives: 67RS Camaro ,Black 2013 ZL1 Join Date: Jun 2010 Location: Alberta Posts: 1,408	Didn't we see these pictures two months ago?

05-08-2015, 09:56 AM	#12
2013 ZL1 #7860 Drives: 2013 ZL1 A6 #7860 Join Date: Apr 2014 Location: CO, USA Posts: 1,279	What is being accomplished with that heat shield?

05-08-2015, 12:44 PM	#13
Black Market Racing Drives: Yours Join Date: Mar 2015 Location: United States Posts: 223	Haha. We love all the criticism. As you can see from the finished prototype the filter is completely covered, blocking the hot air from the engine bay. It will be completely welded for production and also powder coated. Also with the ABS material the intake tube is made from, it does not get heat soaked like aluminum/SS intake material. Yes the fab pictures were a repost. Just wanted to give any new viewers an idea of where both fit in the car for the new subscribers. We think the tape holds up pretty well. Easily replaceable. Obviously the tank will be bolt in. I think we have someone locked down for a final test fit!