EMBARRASSED BY EXHAUST - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Arbgast · 10-02-2013, 10:48 AM

So this morning have two guys putting in new pellet stove. That said could you move your car a little we would not want to scratch a new car. So I started it up and move it. One of the guys says is that an 8 . I said yes. He said it sure don't sound like one. Will I have 4 hours to kill till there done. I will be on the phone and internet getting prices for at least some new mufflers. I just want it to sound like a v8. Any suggestions ( mufflers only) 2014 2ss rs convertible . Thanks

Apex Motorsports · 10-02-2013, 10:54 AM

Borla ATAK or Solo axle back.

blazzin1 · 10-02-2013, 10:55 AM

I'm assuming you don't have the dual-mode NPP Exhaust then, right? If you're on a tight budget.....just have the rear mufflers removed and the muffler shop can weld in some straight pipe. Seriously!!! Lot's of people have done it, and it doesn't sound half bad!!! Otherwise, I can personally recommend the Stainless Works Retro-Catback system. IT ROCKS........especially once you get some long-tube headers in front of it!!!!

ModBargains · 10-02-2013, 11:07 AM

+1 on the Borla ATAK it sounds awesome

nyrfan · 10-02-2013, 11:14 AM

It you only want an axle back I'd go borla.

Sent from my 2SS/RS

JDP Sales · 10-02-2013, 11:22 AM

Quote:

Originally Posted by Arbgast

So this morning have two guys putting in new pellet stove. That said could you move your car a little we would not want to scratch a new car. So I started it up and move it. One of the guys says is that an 8 . I said yes. He said it sure don't sound like one. Will I have 4 hours to kill till there done. I will be on the phone and internet getting prices for at least some new mufflers. I just want it to sound like a v8. Any suggestions ( mufflers only) 2014 2ss rs convertible . Thanks

Before I make a recommendation, What are your future plans for the car?

Sound changes with different modifications and I would hate to see you not like your exhaust after adding headers or something.

Best regards,

Tyler
888-308-6007

RA1987 · 10-02-2013, 11:38 AM

You have a 2014 camaro SS , f what they say lol just saying.

2010 SSRS · 10-02-2013, 11:47 AM

Flowmaster

Cincy10SSRS · 10-02-2013, 11:47 AM

I have Solo hi-flow cats and midpipes (no resonators) mated up to a GMPP Track Pack (bullet style mufflers; "off-road" version) axle-back and it's almost too loud but I love it.

shibbs · 10-02-2013, 11:47 AM

Put headers on. Just headers. I've got long tubes (which removed the cats) and I've gotten nothing but compliments on my exhaust. Sounds GREAT especially when you get on it, but shuts up on the freeway.

http://youtu.be/2D7eqfZ8cxs

nyrfan · 10-02-2013, 11:53 AM

Quote:

Originally Posted by Cincy10SSRS

I have Solo hi-flow cats and midpipes (no resonators) mated up to a GMPP Track Pack (bullet style mufflers; "off-road" version) axle-back and it's almost too loud but I love it.

No such thing!

Quote:

Originally Posted by shibbs

Put headers on. Just headers. I've got long tubes (which removed the cats) and I've gotten nothing but compliments on my exhaust. Sounds GREAT especially when you get on it, but shuts up on the freeway.

http://youtu.be/2D7eqfZ8cxs

That's nothing, here is my dyno (With ARH and Corsa):

Arbgast · 10-02-2013, 12:17 PM

Quote:

Originally Posted by Sales@JDP

Before I make a recommendation, What are your future plans for the car?

Sound changes with different modifications and I would hate to see you not like your exhaust after adding headers or something.

Best regards,

Tyler
888-308-6007

. No plans on anything but mufflers. Its an auto and I have a range afm disable .

molsonbrador · 10-02-2013, 12:22 PM

Quote:

Originally Posted by Arbgast

. No plans on anything but mufflers. Its an auto and I have a range afm disable .

Yeah, you say that now give it 6 months.

Go Borla S mufflers, nice low rumble, compliment car well. And if you do add on later they won't be stuuupid loud.

Birm · 10-02-2013, 12:26 PM

Dynomax VT or Borla.

10-02-2013, 10:48 AM	#1
Arbgast Drives: DRIVES 2014 2SS RS convertible Join Date: May 2012 Location: Eugene Posts: 144 View My Garage	EMBARRASSED BY EXHAUST So this morning have two guys putting in new pellet stove. That said could you move your car a little we would not want to scratch a new car. So I started it up and move it. One of the guys says is that an 8 . I said yes. He said it sure don't sound like one. Will I have 4 hours to kill till there done. I will be on the phone and internet getting prices for at least some new mufflers. I just want it to sound like a v8. Any suggestions ( mufflers only) 2014 2ss rs convertible . Thanks

10-02-2013, 11:14 AM	#5
nyrfan Let's go Rangers! Drives: 13' AGM 2SS/RS L99 Join Date: Jun 2011 Location: Orlando, FL Posts: 10,742 View My Garage	It you only want an axle back I'd go borla. Sent from my 2SS/RS __________________ Soprano 4/1/00-6/14/11, Gone but NEVER forgotten! FSP tuned: 377/389

10-02-2013, 11:47 AM	#8
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,187 View My Garage	Flowmaster __________________ Jannetty Racing JRE Street Package

10-02-2013, 11:47 AM	#9
Cincy10SSRS Drives: 2010 2SS RS M6 Join Date: Mar 2011 Location: Cincinnati area Posts: 1,522	I have Solo hi-flow cats and midpipes (no resonators) mated up to a GMPP Track Pack (bullet style mufflers; "off-road" version) axle-back and it's almost too loud but I love it. __________________ Traded-in car: K&N Typhoon intake, JBA Shorty headers, Solo mid-pipes/hi-flow cats, GMPP Track Pack axle-back, Vmax ported TB, Billet Custom catch can, billet tensioner pulley, Hines Hex Vents, Z/TA rear spoiler, ProCustom headlight covers, Drake black/riveted quarter window covers, GM satin fuel door, chrome and brushed caps/covers under the hood, EmblemPros underhood bowtie & fuel rail "Camaro" plates, chrome "SS" door kick-panels, chrome trunk latch plate & strut rods, Street Scene lower grille ducts w/LED lights, front bowtie-delete, Yates Performance pedals, 35% tint, etc.

10-02-2013, 10:54 AM	#2
Apex Motorsports Drives: 2000 Camaro SS Join Date: Feb 2010 Location: Louisville, Ky. Posts: 25,179	Borla ATAK or Solo axle back.

10-02-2013, 10:55 AM	#3
blazzin1 Drives: 2010 2SS/RS R6P Join Date: Nov 2008 Location: St. Cloud, FL Posts: 4,845 View My Garage	I'm assuming you don't have the dual-mode NPP Exhaust then, right? If you're on a tight budget.....just have the rear mufflers removed and the muffler shop can weld in some straight pipe. Seriously!!! Lot's of people have done it, and it doesn't sound half bad!!! Otherwise, I can personally recommend the Stainless Works Retro-Catback system. IT ROCKS........especially once you get some long-tube headers in front of it!!!!

10-02-2013, 11:07 AM	#4
ModBargains Drives: Camaro RS/SS, 996TT, E90 335i Join Date: Feb 2012 Location: 1721 E. Lambert Rd. Unit C, La Habra, Ca 90631 Posts: 592	+1 on the Borla ATAK it sounds awesome

10-02-2013, 11:38 AM	#7
RA1987 Drives: SS Join Date: Mar 2013 Location: 92129 Posts: 489 View My Garage	You have a 2014 camaro SS , f what they say lol just saying.

10-02-2013, 11:47 AM	#10
shibbs Captain Gingerbeard Drives: 2012 IOM RS/SS 6MT Join Date: Feb 2013 Location: West Twin Cities, MN Posts: 2,489	Put headers on. Just headers. I've got long tubes (which removed the cats) and I've gotten nothing but compliments on my exhaust. Sounds GREAT especially when you get on it, but shuts up on the freeway. http://youtu.be/2D7eqfZ8cxs

10-02-2013, 12:26 PM	#14
Birm Drives: Florida Speed & Power Join Date: Jan 2011 Location: Pinellas Park, FL Posts: 3,185	Dynomax VT or Borla.