06-16-2022, 12:20 PM | #15 |
Drives: 2021 LT1 10 speed auto Join Date: May 2013
Location: Connecticut
Posts: 2,343
|
E85, LT2 intake, stock air box opened up on the lower front, green air filter, airaid intake tube, conservative dyno tune By Ted Jannetty. The datalog was done on straight 93 octane. I can send you the entire data log to your email if you want to see it. I tried to attach it here but I am doing something wrong. And a 180 stat with fans coming on sooner
|
06-16-2022, 12:40 PM | #16 |
Drives: Turbo 6.2 Join Date: Feb 2019
Location: Buffalo
Posts: 702
|
my 2016 SS shows 84% when WOT also
__________________
2016 Turbo Camaro SS - 800hp/900tq 9.7@146
2018 LTZ Z71 Redline Silverado - 381hp/420tq 13.8@100 |
06-16-2022, 12:52 PM | #17 |
Drives: 6th gen Join Date: Aug 2013
Location: US
Posts: 3,684
|
If Ted did it. It’s likely ok. It’s probably a different channel displayed in the scanner. Maybe one is sae and the other isnt
__________________
‘22 2SS 1LE M6 Summit White - RF, Flexfuel, LT2 intake, 95mm tb, ATI udp, VT ramair, full 28” dragpack - 11.68@122
‘16 1SS M6 LT2 intake + boltons on DR 11.0@126+ (Sold) |
06-16-2022, 01:00 PM | #18 |
Drives: 2021 LT1 10 speed auto Join Date: May 2013
Location: Connecticut
Posts: 2,343
|
My thoughts also, Laynlo and I have been sharing some info and on his screen shot, the left side list has different stuff and the throttle position doesnt say SAE and he is at 99.6.
|
06-18-2022, 09:51 PM | #19 |
Snackbar Tuning
Drives: 2023 SGM ZL1 Join Date: Oct 2016
Location: Florida
Posts: 1,122
|
You have to monitor the hi-res channel and not the SAE channel and it will show 99.6% Add the proper channel in the scanner and delete the SAE one. Look over on HPTuner forum as well for more details.
|
06-19-2022, 12:14 PM | #20 |
Drives: 2021 LT1 10 speed auto Join Date: May 2013
Location: Connecticut
Posts: 2,343
|
|
|
|
Post Reply
|
|
|