07-05-2014, 05:27 PM | #1 |
Drives: 2013 VR vert ZL1 Join Date: Aug 2012
Location: Los Angeles
Posts: 1,495
|
20x10 20mm offset?
Can I use these sizes wheels on the front and rear?
Sent from my SM-N900P using Tapatalk |
07-05-2014, 05:50 PM | #2 |
SoCal Camaro5 Race Team
Drives: 2021 Shadow Grey Camaro 2SS 1LE Join Date: Mar 2010
Location: SO CAL
Posts: 14,288
|
[QUOTE=C-redfly;7795484]Can I use these sizes wheels on the front and rear?
Sent from my SM-N900P using Tapatalk[/QUOTE should be o.k., may stick out just a little past the fender edge |
07-05-2014, 06:16 PM | #3 |
Drives: 2013 VR vert ZL1 Join Date: Aug 2012
Location: Los Angeles
Posts: 1,495
|
Okay thanks I was pretty sure being the ZL1 runs 20x10 with 23mm offset.
Correct me if I'm wrong, 20mm would stick out 3mm more then the ZL1 front wheels. Sent from my SM-N900P using Tapatalk |
07-05-2014, 08:04 PM | #4 |
SoCal Camaro5 Race Team
Drives: 2021 Shadow Grey Camaro 2SS 1LE Join Date: Mar 2010
Location: SO CAL
Posts: 14,288
|
|
07-05-2014, 08:51 PM | #5 |
ROAD COURSE JUNKIE
|
3 millimeters is
0.118 inches Should be ok unless you are lowered more than an inch. Roll your fender or you will cut the tires on bumps.
__________________
|
07-06-2014, 12:42 AM | #6 |
Drives: 2013 VR vert ZL1 Join Date: Aug 2012
Location: Los Angeles
Posts: 1,495
|
I planned on doing a 1inch drop all around.
Sent from my SM-N900P using Tapatalk |
07-06-2014, 03:18 AM | #7 |
Blowin the doors off!
Drives: A 2013 SS RS 6M SR Join Date: Apr 2010
Location: Phoenix, AZ
Posts: 2,390
|
Don't run 20mm offset... I was sold a set and told they would fit... not only did it look like @$$ but rubbed on my fenders. That's with 275's.... 35mm offset is what you want.
Edit: Front 20mm sits perfect rear needs to be 35.
__________________
2G1FS1EWXD9163847 |
07-06-2014, 03:21 AM | #8 |
Blowin the doors off!
Drives: A 2013 SS RS 6M SR Join Date: Apr 2010
Location: Phoenix, AZ
Posts: 2,390
|
+1 on the being lowered. Mine is lowered 1.5 in the back and as I stated above, rubbed like a mofo...
__________________
2G1FS1EWXD9163847 |
07-06-2014, 10:42 AM | #9 |
SoCal Camaro5 Race Team
Drives: 2021 Shadow Grey Camaro 2SS 1LE Join Date: Mar 2010
Location: SO CAL
Posts: 14,288
|
Yeah if lowering better research. As stated 1.5" will rub with just 275s. I had 315s with a 1.25" rear drop and o.k. But I had a 35 offset, you may have to go with the 35 or not lower it.
|
07-06-2014, 02:05 PM | #10 |
Blowin the doors off!
Drives: A 2013 SS RS 6M SR Join Date: Apr 2010
Location: Phoenix, AZ
Posts: 2,390
|
The 20mm offsets are for bmw's at least that's my understanding.
__________________
2G1FS1EWXD9163847 |
|
|
|
|