ZL1 1LE WHEELS? - Page 2

Eric SS · 02-25-2017, 08:28 AM

Quote:

Originally Posted by Mountain

Fixed

Ha! Touché!
I'm leaving it as is

Eric SS · 02-25-2017, 08:34 AM

Quote:

Originally Posted by BradfordCamaro

To many dreamers wanting these for their Camaro.
They Will Not Fit guys. Get real.

They would stick out 2". You can get any wheel to look stupid like that.

With the new suspension there is likely more room on the inside to tuck those monsters in. Measured out perfectly to the millimeter by GM engineers.

Trying to bolt these up will have the the wheel hitting your stock Strut before it even sits on the hub.

That's my thought too. The coilovers will likely not be as wide as the mag ride suspension. I can tell you that with my 19x10 et25 setup I have zero room to go any further inboard. There is maybe 1/8" clearance from the wheel to the strut. The only way for me to fit a 11" wide 19" diameter wheel on my car would be to add the extra inch to the outside and that would look terrible. You can look in the middle of my thread here to see photos of the clearance and the beginning of the thread to see the poke of the front wheels. I know the ZL1 has wider fenders but I don't believe they are that much wider. http://www.camaro6.com/forums/showthread.php?t=484441

Zack46 · 02-25-2017, 08:42 AM

SR 33 · 02-25-2017, 11:18 AM

Quote:

Originally Posted by BradfordCamaro

To many dreamers wanting these for their Camaro.
They Will Not Fit guys. Get real.

They would stick out 2". You can get any wheel to look stupid like that.

With the new suspension there is likely more room on the inside to tuck those monsters in. Measured out perfectly to the millimeter by GM engineers.

Trying to bolt these up will have the the wheel hitting your stock Strut before it even sits on the hub.

THIS:

Quote:

Originally Posted by Gilley

Maybe some wheel manufacturer will make a replica that does fit. It's happened before. Hint.

BradfordCamaro · 02-25-2017, 01:57 PM

Here is the DSSV. Lots of room there you will not find with a stock strut

inkcoloredblack · 02-25-2017, 10:48 PM

For those of us without mag ride. You would think with an aftermarket coilover these would fit with a little poke due to the fenders? I personally think it would look pretty beefy

AdmAnt13 · 02-26-2017, 12:06 PM

I love these wheels. MRR should make these in 20's to fit the SS and LT's. I would purchase them. I love my 1LE wheels but change/variety is nice too!

CamaroBody · 02-27-2017, 12:03 AM

Quote:

Originally Posted by AdmAnt13

I love these wheels. MRR should make these in 20's to fit the SS and LT's. I would purchase them. I love my 1LE wheels but change/variety is nice too!

%^

MRRWheelsInc · 02-28-2017, 11:17 AM

.......already on it guys..........
I wont say much about it right now but none of you will be disappointing.

AdmAnt13 · 02-28-2017, 01:09 PM

Quote:

Originally Posted by MRRWheelsInc

.......already on it guys..........
I wont say much about it right now but none of you will be disappointing.

I love you guys

Dubchitts · 02-28-2017, 04:39 PM

Quote:

Originally Posted by AdmAnt13

I love these wheels. MRR should make these in 20's to fit the SS and LT's. I would purchase them. I love my 1LE wheels but change/variety is nice too!

This. Make them the same size as the z28 replicas and 1le replicas. This guy would buy for sure!

Michigan1LTRS · 02-28-2017, 06:20 PM

Quote:

Originally Posted by MRRWheelsInc

.......already on it guys..........
I wont say much about it right now but none of you will be disappointing.

Nice!!!

travislambert · 02-28-2017, 06:29 PM

Quote:

Originally Posted by MRRWheelsInc

.......already on it guys..........
I wont say much about it right now but none of you will be disappointing.

I'd like to request that the new wheels use the stock lug nuts.

(The smaller lug nuts look a little wimpy IMO.)

Corner carver · 03-01-2017, 06:42 AM

Quote:

Originally Posted by MRRWheelsInc

.......already on it guys..........
I wont say much about it right now but none of you will be disappointing.

Please, please, please make them in 19's and as wide as reasonably possible

02-25-2017, 08:42 AM	#17
Zack46 Drives: 2018 2SS Camaro Hot Wheels Edition Join Date: Sep 2015 Location: Cleveland, Ohio Posts: 2,814	__________________ Zack46 2018 Camaro 2SS Orange Crush Hot Wheels Limited Edition Power Sunroof, 8 Speed Auto/Remote Start, NPP Exhaust Production Sequence Number 98 **NEOCC Camaro Club Member** Former Ride: 2016 Camaro 2LT RS V6 Hyper Blue Metallic

02-25-2017, 01:57 PM	#19
BradfordCamaro SABIO Drives: 2016 CAMARO 1SS Join Date: Jul 2015 Location: Bradford, ON Posts: 5,012	Here is the DSSV. Lots of room there you will not find with a stock strut Attached Images __________________

02-26-2017, 12:06 PM	#21
AdmAnt13 Drives: '16 Red Hot 2SS M6 NPP Join Date: Apr 2016 Location: The Beach, NC Posts: 603	I love these wheels. MRR should make these in 20's to fit the SS and LT's. I would purchase them. I love my 1LE wheels but change/variety is nice too! __________________ '16 2SS, M6, Borla Atak

02-25-2017, 10:48 PM	#20
inkcoloredblack Drives: 2017 Chevy Camaro SS Join Date: Oct 2016 Location: 17756 Posts: 17	For those of us without mag ride. You would think with an aftermarket coilover these would fit with a little poke due to the fenders? I personally think it would look pretty beefy

02-28-2017, 11:17 AM	#23
MRRWheelsInc Drives: Camaro Join Date: Jan 2016 Location: Los Angeles Posts: 287	.......already on it guys.......... I wont say much about it right now but none of you will be disappointing.

User Name		Remember Me?
Password