02-25-2017, 07:53 PM | #1 |
Drives: '16 Red Hot 2SS M6 NPP Join Date: Apr 2016
Location: The Beach, NC
Posts: 603
|
RPI Spoiler pictures and install
Ok guys so I know a lot have asked for pictures of my RPI spoiler install because I put it on my SS without drilling any other holes.
I ground off the center and middle studs. This essentially left two studs for the spoiler to actually mount with. I then used 3M adhesive to fill in the rest. The spoiler stays with no issue after two months of install and have no water leakage issues. I did use "strip caulk" around the studs to seal the holes in the deck lid. I don't have pictures of the underneath of the spoiler but I might once I take the spoiler off in a bit to get the paint touched up (its not perfect). Please see below and feel free to ask me questions. I hope you like it as much as I do!
__________________
'16 2SS, M6, Borla Atak |
02-25-2017, 08:59 PM | #2 |
Drives: 2017 1SS Join Date: Mar 2016
Location: Northeast Pennsylvania
Posts: 90
|
Looks great, makes the rear of the car look menacing!! I'm still undecided to match the body color or go gloss back, from behind black but I'm not totally convinced on the way it looks on the deck lid. Your thoughts now that you have it?
|
02-25-2017, 09:03 PM | #3 |
Drives: 2016 SS M6, NPP Join Date: Apr 2016
Location: Hawthorne, CA
Posts: 1,957
|
Looks good man. Any shots of the front?
|
02-25-2017, 09:12 PM | #4 |
Drives: 2017 1SS Join Date: Mar 2016
Location: Northeast Pennsylvania
Posts: 90
|
Thanks for the info, I will be doing the same for install.
|
06-01-2017, 08:58 PM | #5 |
Drives: 2016 Chevy Camaro 2ss Red Hot Join Date: Nov 2016
Location: Metro Detroit
Posts: 16
|
Thanks for posting this, just ordered one of the RPI spoilers for my Red Hot SS after seeing yours. Just looks too good.
|
06-02-2017, 04:32 AM | #6 |
Drives: '16 Red Hot 2SS M6 NPP Join Date: Apr 2016
Location: The Beach, NC
Posts: 603
|
Cool man. Glad I could help.
__________________
'16 2SS, M6, Borla Atak |
06-02-2017, 09:08 PM | #7 |
Hey can you post a side profile pic or 2? Still trying to decide, looks good but on your car...
__________________
|
|
06-03-2017, 03:36 PM | #8 |
Drives: 2016 Camaro SS Join Date: Jan 2017
Location: Modesto, Ca
Posts: 111
|
Thank for posting the pics, looks really good, been debating between this and the Street Scene one. Think I'm going with the SS, they're both nice, but this one is a bit too tall for my taste.
|
06-03-2017, 10:28 PM | #9 |
Drives: '16 Red Hot 2SS M6 NPP Join Date: Apr 2016
Location: The Beach, NC
Posts: 603
|
I'll post some more pics people have requested tomorrow once I get the car out.
__________________
'16 2SS, M6, Borla Atak |
06-18-2017, 04:37 PM | #10 |
Drives: '16 Red Hot 2SS M6 NPP Join Date: Apr 2016
Location: The Beach, NC
Posts: 603
|
Sorry for the delay. Here's some side profile shots:
__________________
'16 2SS, M6, Borla Atak |
06-18-2017, 08:47 PM | #11 |
Great thanks for posting!
__________________
|
|
06-20-2017, 07:13 PM | #12 |
Drives: 2016 Chevy Camaro 2ss Red Hot Join Date: Nov 2016
Location: Metro Detroit
Posts: 16
|
Installed mine yesterday!
|
06-20-2017, 08:14 PM | #13 |
Drives: '16 Red Hot 2SS M6 NPP Join Date: Apr 2016
Location: The Beach, NC
Posts: 603
|
Pics no worky bud
__________________
'16 2SS, M6, Borla Atak |
01-09-2018, 12:40 PM | #14 |
Drives: '16 Mosaic Black 2SS Join Date: Jan 2018
Location: Riffa
Posts: 13
|
Thanks for the info. Just to be clear, did you need to enlarge the existing holes? I think on their website it said something about them using larger studs.
|
|
|
Post Reply
|
|
|