07-25-2017, 09:29 PM | #1 |
Drives: 2017 Hyper Blue 2SS Join Date: Mar 2017
Location: East Bay, California
Posts: 173
|
Gen5diy radar hardwire harness
Just did the install on the radar hardware harness for a Gen6 Camaro. https://photos.app.goo.gl/vWofMwP7uhP32kSv2
Very simple and clean install following their instructions. It basically plugs into the airbag connector at the back of the overhead console and you route the power for your detector under the headliner near the mirror. It powers on and off with ignition. I would recommend it if you don't want to tap into wires or connectors.
__________________
Hyper Blue 2SS, 6MT, NPP, 6 piston Brembo, 1LE suspensions upgrade, ZL1 Seats, Wheels & Tires
|
Post Reply
|
|
|