07-21-2016, 09:17 PM | #785 |
Drives: Cool parts for cool cars Join Date: Sep 2009
Location: Riviera Beach FL
Posts: 991
|
Here is a few pictures of a heat extractor install I did on our MPD1 "COPO" style hood a couple weeks ago
|
08-09-2016, 03:01 PM | #786 |
Drives: 2012 camaro Join Date: Nov 2015
Location: flower mound Tx.
Posts: 65
|
Hey jerry,
Will this also work on a 2012 v6. I think the hood is the same just wondering about clearance issues |
08-11-2016, 08:30 PM | #787 |
Yes I am pretty sure there would be no issues. There have been plenty of guys on this thread that have completed this and they had V6 cars.
|
|
08-14-2016, 02:34 PM | #788 |
Drives: 2015 1LS Red V6 Join Date: Aug 2015
Location: St Joseph, MO
Posts: 1,849
|
I just did this, and i have some uneven spots all the way around. The back side doesn't sit flush, but the front does. And the middle bracing is sucking the hood down. Any thoughts?
__________________
Sponsors:
Overkill Motorsport BCS Auto JacFab Machining APDEG Dream Gear Mobile Audio Thanks to Will @ Overkill Motorsports, Jason @ JacFab, Jim @ Ohio Speed, Brandon at Dream Gear, and the boys at Randy Curnow Chevrolet 5th Gen V6 Performance Facebook Group |
08-14-2016, 02:59 PM | #789 |
Drives: 2015 Black 2LT RS M6 Join Date: Aug 2015
Location: Cali
Posts: 2,033
|
Any pics?
__________________
Overkill tune/E85/80mm•CAI cold air intake w/my custom maf tube•Apex air scoop•JacFab ported intake/Extendolater•Vitesse•EE EX2 catch can•Innovate wideband•ARH HFC's•NPP exhaust•11386 xpipe•Brembos/cross drilled/slotted rotors•SS M/C•Pfadt 1.25 springs•1LE struts/sways/strut tower brace•BMR diff bush, trail arms/bush, adj toe links•My custom Tunnel brace•Hurst short throw shifter•JDP stage 1 clutch res•1LE steering wheel, shift boot•ZL1 rear diffuser/splash guards•GM splitter•Z/28 grille/flowtie/spoiler/wheels•GM performance pedals•"Chevrolet" door sills•10" Kicker sub•BigWorm overlays
|
08-14-2016, 03:17 PM | #790 |
Drives: 2015 1LS Red V6 Join Date: Aug 2015
Location: St Joseph, MO
Posts: 1,849
|
Sent from my iPhone using Tapatalk
__________________
Sponsors:
Overkill Motorsport BCS Auto JacFab Machining APDEG Dream Gear Mobile Audio Thanks to Will @ Overkill Motorsports, Jason @ JacFab, Jim @ Ohio Speed, Brandon at Dream Gear, and the boys at Randy Curnow Chevrolet 5th Gen V6 Performance Facebook Group |
08-14-2016, 03:49 PM | #791 |
Drives: 2015 Black 2LT RS M6 Join Date: Aug 2015
Location: Cali
Posts: 2,033
|
Awe man Derek. That's why I haven't done this yet. Scare me to death
__________________
Overkill tune/E85/80mm•CAI cold air intake w/my custom maf tube•Apex air scoop•JacFab ported intake/Extendolater•Vitesse•EE EX2 catch can•Innovate wideband•ARH HFC's•NPP exhaust•11386 xpipe•Brembos/cross drilled/slotted rotors•SS M/C•Pfadt 1.25 springs•1LE struts/sways/strut tower brace•BMR diff bush, trail arms/bush, adj toe links•My custom Tunnel brace•Hurst short throw shifter•JDP stage 1 clutch res•1LE steering wheel, shift boot•ZL1 rear diffuser/splash guards•GM splitter•Z/28 grille/flowtie/spoiler/wheels•GM performance pedals•"Chevrolet" door sills•10" Kicker sub•BigWorm overlays
|
08-14-2016, 04:54 PM | #792 |
Drives: 2018 Hyper Blue 1SS 1LE Join Date: Jul 2011
Location: Brownsburg, Indiana
Posts: 6,231
|
Hole to small? Vent warped? Ryan
__________________
Ryan
* 2018 1SS 1LE Camaro Hyper Blue Metallic Car Build: http://www.camaro6.com/forums/showth...0#post10049680 |
08-14-2016, 06:36 PM | #793 | |
Quote:
I've also used Riv-nuts to attach the rain tray. Good luck, Rich
__________________
No longer stock, but oooh so much more fun!
|
||
08-14-2016, 08:32 PM | #794 |
Hole too small is the 1st thing to come to mind for the uneven results Derek 1387 is getting. That should be verified 1st.
|
|
08-15-2016, 03:48 AM | #795 |
Drives: 2015 1LS Red V6 Join Date: Aug 2015
Location: St Joseph, MO
Posts: 1,849
|
I thought the hole may be too small as well...but it drops in very very easily and can actually slide around a hair if need be. But I'll double check!
Sent from my iPhone using Tapatalk
__________________
Sponsors:
Overkill Motorsport BCS Auto JacFab Machining APDEG Dream Gear Mobile Audio Thanks to Will @ Overkill Motorsports, Jason @ JacFab, Jim @ Ohio Speed, Brandon at Dream Gear, and the boys at Randy Curnow Chevrolet 5th Gen V6 Performance Facebook Group |
08-16-2016, 07:04 AM | #796 | |
Drives: Cool parts for cool cars Join Date: Sep 2009
Location: Riviera Beach FL
Posts: 991
|
Quote:
|
|
08-27-2016, 08:19 AM | #797 | |
Drives: 2010 Camaro SS/RS Join Date: Mar 2014
Location: somewhere in MD
Posts: 4,883
|
Quote:
__________________
2010 2SS/RS
Z/28 intake, NW, FAST 102, speed engineering LT's, some exhaust, ATI -10% pulley, GM flex fuel injectors, DSX flex fuel sensor, MGW shifter, HP Tuners, some suspension work, stickers and a little weight loss. 12.63 @113.53 |
|
08-28-2016, 08:53 AM | #798 |
Here's how mine turned out
|
|
|
|
|
|