[dragonZ28]

We made this for a customer and decided to make it available on our site for those who may be interested. Thanks for looking.

http://emblempros.com/inc/sdetail/30/73561

[H & E]

Ordering mine now! Thanks guys.

[WhyUMad1LE]

Cool, so we just pry off the SS/FIFTY emblem and stick this on?

[dragonZ28]

Originally Posted by WhyUMad1LE

Cool, so we just pry off the SS/FIFTY emblem and stick this on?

The plastic piece that the emblem sits on will need to be removed. Then, you will need to cut/grind the emblem off from the back of the base as it is plastic welded into place. Afterwards, the OEM emblem will simply pull off. Then, put this in its place.

[FlashBang23]

Originally Posted by dragonZ28

The plastic piece that the emblem sits on will need to be removed. Then, you will need to cut/grind the emblem off from the back of the base as it is plastic welded into place. Afterwards, the OEM emblem will simply pull off. Then, put this in its place.

dumb question, how difficult is that bottom trim piece to remove? Something that can be popped off with a trim removal tool or is it more labor intensive than that??

[dragonZ28]

Originally Posted by FlashBang23

dumb question, how difficult is that bottom trim piece to remove? Something that can be popped off with a trim removal tool or is it more labor intensive than that??

It will pull straight out. Just wrap a flathead in a towel, and get the bottom lifted off the wheel, and work your way around the piece. It is easy to take off.

[FlashBang23]

Originally Posted by dragonZ28

It will pull straight out. Just wrap a flathead in a towel, and get the bottom lifted off the wheel, and work your way around the piece. It is easy to take off.

That's what I was hoping, thanks!