Audio upgrade 1SS Non Bose - Page 5

Darth Martel · 04-07-2017, 06:18 AM

Does anybody know the size of ring terminal needed for that 200A stud on the battery?

Alfieboy · 05-14-2017, 12:23 AM

Quote:

Originally Posted by RobsCountach

Exhaust note only plays into system on the Bose setup...

on non bose 1ss also..............

Tankman · 05-14-2017, 05:43 AM

Quote:

Originally Posted by RobsCountach

Exhaust note only plays into system on the Bose setup...

On the 2.0 turbo 1LT model too??? If yes pls explain.
TIA
Tankman

NY Andrew · 05-14-2017, 10:20 AM

Can someone record this "ANC noise" coming from their speakers? Not sure if I am or have experience it with my system because I never touched any aspect of ANC. I think I hear some noise sometimes, but not sure if that's it. Also unsure how to properly disconnect it.

Alfieboy · 05-15-2017, 09:11 PM

get a sub..you'll know right away..

Alfieboy · 05-15-2017, 09:17 PM

the noise is gone from sub when disconnecting the green with black stripe..and the blue with black stripe as noted here in forum. I have plug back in..all works way supposed to...just no obnoxious resonating of sub now..

NY Andrew · 05-15-2017, 09:28 PM

I have a sub boy if you read. 2 12 rockfords. So I'd have to cut those wires now too. Confused why you disconnected and then plugged back in and it worked with no noise, doesn't make sense to me.

ctrlz · 05-16-2017, 10:46 AM

Quote:

Originally Posted by NY Andrew

Confused why you disconnected and then plugged back in and it worked with no noise, doesn't make sense to me.

I have not looked up the color codes, but I'm guessing he cut one wire for each door microphone which is all that needs to be done. Put the plug back in so you retain door chimes, turn signals, etc.

wal-dog · 05-16-2017, 12:00 PM

Quote:

Originally Posted by RobsCountach

Is this taking the stock amp, out of the signal. Splice out before, Splice back to speakers ? Looking which wire, of the plug, is signal in and which is speaker out ?

Also, does not utilizing Pins 1 - 4 & 9 - 12, remove the bass (low level signal) ?

I have a 1LT. Might not even be same colors, but do have Amp in trunck.

Pins 1-4 and 9-12 are the signals coming from the head unit to the amp. All the other pins are are going from the amp to the speakers. The stock amp is still in the mix. You take the wires that were going to the speakers and instead send them to the LOC. The LOC turns those signals into usable RCA's and you'll all set to do whatever you like with them.

NY Andrew · 05-17-2017, 07:12 PM

I have the 2LT and only have one black plug with one wire in it. Disconnected it, blinker noise was gone, from what I could tell almost looked like less booming/buzzing noise, but it through a CEL.. that happening to you guys too?

Alfieboy · 05-19-2017, 11:55 PM

Quote:

Originally Posted by NY Andrew

I have a sub boy if you read. 2 12 rockfords. So I'd have to cut those wires now too. Confused why you disconnected and then plugged back in and it worked with no noise, doesn't make sense to me.

unplugged..

cut wires..
plugged back in...

green with blk
blue w/blk

Alfieboy · 05-19-2017, 11:56 PM

not sure of Bose..i have 1ss no Bose

davef · 05-20-2017, 03:23 PM

Anyone know if a 1SS 1LE has the ANC system? As far as anyone has been able to tell, there's no amp in the 1LE non Bose system.

brianhj · 05-22-2017, 07:39 PM

Quote:

Originally Posted by Darth Martel

Does anybody know the size of ring terminal needed for that 200A stud on the battery?

Here's what I'm not understanding:

You guys are adding another 60+ amps (depending on the size of the subwoofer aftermarket amp) to another fused circuit? That's potentially 260A on a circuit designed for 200A, correct? Shouldn't the sub amp have it's own wire directly from the battery terminal?

04-07-2017, 06:18 AM	#57
Darth Martel Darth Martel Drives: Black 1SS with 20% tinted windows Join Date: May 2009 Location: Bizzaroland Posts: 1,496	Does anybody know the size of ring terminal needed for that 200A stud on the battery? __________________ 2016 Black 1SS w/ MRC, low-gloss black wheels, auto trans. Self-created custom Dark Knight Edition accents. Rotofab CAI with dry filter and sound tube delete, PRAY ported intake manifold and throttle body, Texas Speed cam, Stainless Works headers and exhaust, Skid Mark garage E85 kit, JMS fuel pump voltage booster, Circle D torque converter. Custom E85/mod tune by Jannetty Racing.

05-14-2017, 10:20 AM	#60
NY Andrew Drives: 2016 Camaro V6 2LT RS Fully Loaded Join Date: Sep 2015 Location: VA Posts: 474	Can someone record this "ANC noise" coming from their speakers? Not sure if I am or have experience it with my system because I never touched any aspect of ANC. I think I hear some noise sometimes, but not sure if that's it. Also unsure how to properly disconnect it. __________________ Borla ATAK w/ Midpipe, VMAX TB, K&N Filter, Subwoofer, Tinted, AFM Disabler, Vitesse Throttle Controller! ORDERED:08/19/15 DELIVERED:12/09/15 My 2LT Review/Pictures/Mustang Comparison My 2016 Camaro Bose Subwoofer Install 2016 Camaro V6 Stock to Borla Atak Exhaust Sound 2016 Camaro V6 Resonator & X-Pipe Replace with Midpipe & Borla Atak

05-15-2017, 09:28 PM	#63
NY Andrew Drives: 2016 Camaro V6 2LT RS Fully Loaded Join Date: Sep 2015 Location: VA Posts: 474	I have a sub boy if you read. 2 12 rockfords. So I'd have to cut those wires now too. Confused why you disconnected and then plugged back in and it worked with no noise, doesn't make sense to me. __________________ Borla ATAK w/ Midpipe, VMAX TB, K&N Filter, Subwoofer, Tinted, AFM Disabler, Vitesse Throttle Controller! ORDERED:08/19/15 DELIVERED:12/09/15 My 2LT Review/Pictures/Mustang Comparison My 2016 Camaro Bose Subwoofer Install 2016 Camaro V6 Stock to Borla Atak Exhaust Sound 2016 Camaro V6 Resonator & X-Pipe Replace with Midpipe & Borla Atak

05-17-2017, 07:12 PM	#66
NY Andrew Drives: 2016 Camaro V6 2LT RS Fully Loaded Join Date: Sep 2015 Location: VA Posts: 474	I have the 2LT and only have one black plug with one wire in it. Disconnected it, blinker noise was gone, from what I could tell almost looked like less booming/buzzing noise, but it through a CEL.. that happening to you guys too? __________________ Borla ATAK w/ Midpipe, VMAX TB, K&N Filter, Subwoofer, Tinted, AFM Disabler, Vitesse Throttle Controller! ORDERED:08/19/15 DELIVERED:12/09/15 My 2LT Review/Pictures/Mustang Comparison My 2016 Camaro Bose Subwoofer Install 2016 Camaro V6 Stock to Borla Atak Exhaust Sound 2016 Camaro V6 Resonator & X-Pipe Replace with Midpipe & Borla Atak

05-15-2017, 09:11 PM	#61
Alfieboy Madman Drives: 2017 1SS Join Date: Jun 2009 Location: RICHMOND VA Posts: 1,405 View My Garage	get a sub..you'll know right away..

05-15-2017, 09:17 PM	#62
Alfieboy Madman Drives: 2017 1SS Join Date: Jun 2009 Location: RICHMOND VA Posts: 1,405 View My Garage	the noise is gone from sub when disconnecting the green with black stripe..and the blue with black stripe as noted here in forum. I have plug back in..all works way supposed to...just no obnoxious resonating of sub now..

05-19-2017, 11:56 PM	#68
Alfieboy Madman Drives: 2017 1SS Join Date: Jun 2009 Location: RICHMOND VA Posts: 1,405 View My Garage	not sure of Bose..i have 1ss no Bose

05-20-2017, 03:23 PM	#69
davef Drives: 2017 SS 1LE Garnet Red Join Date: Nov 2016 Location: Wisconsin Posts: 195	Anyone know if a 1SS 1LE has the ANC system? As far as anyone has been able to tell, there's no amp in the 1LE non Bose system.

User Name		Remember Me?
Password