10-13-2015, 12:02 PM | #1 |
Drives: '17 Red hot 2ss, 16 Focus RS Join Date: Aug 2015
Location: Michigan
Posts: 845
|
Vitesse throttle controller mount
Recently installed the throttle controller and was just looking for ideas on places to mount the box with the buttons. Show me yours!
|
10-13-2015, 12:30 PM | #2 |
Drives: '17 Red hot 2ss, 16 Focus RS Join Date: Aug 2015
Location: Michigan
Posts: 845
|
|
10-13-2015, 01:22 PM | #3 |
Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009
Location: Tampa
Posts: 5,110
|
Here is mine
__________________
Sold 2012 2LT RS 12.3@112 old setup
Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 ** Born 3/17/17**Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. **807hp/762tq on 93 gas** and **848hp/792tq on e47** Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive |
10-13-2015, 01:43 PM | #4 |
Drives: '17 Red hot 2ss, 16 Focus RS Join Date: Aug 2015
Location: Michigan
Posts: 845
|
Ooh. I feel dumb. Lol. Mine probably has it too. I only had time to put it in and do a test drive.
Aww. I had a chance to look at mine. It didn't come with the tape:/ oh well. Thanks for the pics so far. . Keep them coming plz! Last edited by Dubchitts; 10-13-2015 at 03:28 PM. |
10-13-2015, 08:46 PM | #5 |
Drives: 2012 Camaro 1LT/RS Join Date: Jun 2015
Location: Plainfield, IL
Posts: 18
|
My tape was loose in bag with all the parts. Mine is out of site, I have just set it on 4 and leave it.
__________________
2012 Camaro 1LT/RS Black with Cyber gray rally strips. CAI, Elite Catch Can, Vitesse Throttle controller, BMR Sway Bars, Strut tower Brace. |
10-14-2015, 04:04 PM | #6 |
Drives: 2013 Camaro ZL1, 2006 Chevy Equinox Join Date: Apr 2013
Location: Ontario, Canada
Posts: 833
|
Under steering wheel.
__________________
|
10-14-2015, 05:02 PM | #7 |
Drives: 2016 1LT RS Turbo 4 Join Date: Jun 2014
Location: Glendale, AZ 85301
Posts: 155
|
I have mine set to 4 and tucked inside the under dash cover directly under the steering wheel, wrapped a small piece of wire around it with a hook bend on it so it will not fall out. if i need to check or change it i just reach under the wheel and pull it out by the hook! totally outa sight
|
10-14-2015, 05:18 PM | #8 |
Drives: '17 Red hot 2ss, 16 Focus RS Join Date: Aug 2015
Location: Michigan
Posts: 845
|
I like that. Good spots so far that I wouldn't have thought of. I'm still trying to decide if I want it out of sight or in sight. I wish the hazard switch were somewhere else. It fits nicely in that spot
|
10-14-2015, 06:29 PM | #9 |
Drives: 2014 yellow 2SS/RS Join Date: Apr 2015
Location: Stoney Creek, Ontario
Posts: 488
|
I like this spot, easily visible if needed.
[ATTACH]b[/ATTACH]
__________________
K&N, Borla ATAK axle back, resonator delete, Speed Engineering headers,Vitesse, Zl1 wheels, ACS rocker panels, 1LE splitter
|
10-14-2015, 07:08 PM | #10 |
Drives: 2013 Camaro ZL1, 2006 Chevy Equinox Join Date: Apr 2013
Location: Ontario, Canada
Posts: 833
|
Thanks,
I hated the look of the wire, so i didn't want to see it. Plus its kindof funny when i turned it up and passengers go "uhmm what are you doing?". I took it out since but came off of that location without any residue. And in that location if you ever have to bring to dealer or something. Can put it on with velcro and then remove and tuck up inside the steering wheel if need be.
__________________
|
10-14-2015, 10:45 PM | #11 |
|
When I had one I put it right under the digital gauge above the steering wheel
__________________
2010 Camaro 2SS/RS | 416 LS3 | FED stage 2 heads
|
10-14-2015, 11:23 PM | #12 |
Team LFX
Drives: Fast Join Date: Mar 2012
Location: TX
Posts: 621
|
For those without a HUD: remove the screws, drill out a small hole on the left side, and reroute the wire for a much cleaner look.
|
10-15-2015, 09:22 AM | #13 |
Drives: 2014 yellow 2SS/RS Join Date: Apr 2015
Location: Stoney Creek, Ontario
Posts: 488
|
I didnt want to open and ruin it, but if it can be done safely I may try that, looks much better SgtPickles69
__________________
K&N, Borla ATAK axle back, resonator delete, Speed Engineering headers,Vitesse, Zl1 wheels, ACS rocker panels, 1LE splitter
|
10-15-2015, 11:00 AM | #14 |
Drives: early 2011 Camaro convertible Join Date: Jul 2014
Location: House Springs, Mo
Posts: 2,002
|
tucked wire under edge of console and ran it back to console box and put it inside.
__________________
Early 2011 LT Convertible, ZL1 bumper, hood, side skirts, belly pan and wheels, Truecarbon ECF hood extractor, K&N CAI, Elite catch can, Big Worm Bow Tie emblems, Jacfab bracket, Vitesse TC, BMR strut brace, BMR tunnel brace, NPP exhaust |
|
|
|
|