10-10-2014, 02:17 AM | #1 |
Drives: 2015 1SS, 1LE, Recaro, NPP Join Date: Apr 2014
Location: Fresno, CA
Posts: 927
|
Wicker bill on 1LE spoiler?
Has anybody put the wicker bill on their 1LE? I'm really curious to see what it looks like, I'm too scared to do it first.
Also, does anybody know where I can get the Z/28 carbon fiber heat extractor for my car?
__________________
2015 Summit White 1SS, 1LE, Recaros, NPP
498 RWHP 447 RWTQ (Motor) 647 RWHP 723 RWTQ (150 Shot) 12.1 @ 117 (Motor) 11.7 @ 129 (Nitrous) Nitrous Outlet Single Nozzle Kit | Stand Alone Fuel Cell w/ C16 | Custom Grind Cam | Stainless Power 1 7/8 LT Headers | CAI Intake | ATI Super Damper | BMR Trailing Arms & Toe Links | Prothane Polyurethane Sub-frame Bushings | JDP Upper Control Arm Bushings | MT Drag Radials | Tuned by SS Motorsports Youtube Channel: Click Here |
10-10-2014, 07:26 AM | #2 |
I think the Moreno brothers are working on a CF hood extractor. If you can talk you way into a z/28 part I think they're still around the $2500 mark.
|
|
10-10-2014, 07:28 AM | #3 |
Drives: '14 1LE Join Date: Nov 2013
Location: NJ
Posts: 2,435
|
I've asked the same question about the wicker bill, but no luck so-far
|
10-10-2014, 08:20 AM | #4 |
http://www.camaro5.com/forums/showthread.php?t=380517
This guy did it on his ZL1 spoiler, which should be the same or very similar to the '14 spoiler. |
|
10-10-2014, 08:40 AM | #5 | |
Drives: '14 1LE Join Date: Nov 2013
Location: NJ
Posts: 2,435
|
Quote:
|
|
10-10-2014, 10:01 AM | #6 |
Drives: 14 1LE Join Date: Mar 2013
Location: Spokane, WA
Posts: 1,567
|
I've done a lot of research into this. No I didn't end up doing it but yes it will fit. They curve along the rear of the spoiler is really close to the same and the thickness of the material is the same as well so it will support the use of riv-nuts. You will, depending on how you position it, have holes showing in the raised position and it will hang below in the outer corners when it's down.
__________________
LMS Engineering
|
10-10-2014, 11:12 AM | #7 |
Drives: 2015 SS 1LE Red Hot, 1970 Chevelle Join Date: Apr 2012
Location: Chino, CA
Posts: 6,989
|
If you track your car a lot, I would think twice before adding the wickerbill. The 1LE is set up as is to reduce understeer. Al O said adding more downforce to the rear end of the car would cause understeer which is why the 1LE has the spoiler it does.
__________________
|
10-27-2014, 09:36 AM | #8 |
Drives: Evil Eva, 2010 2SS LS3 Join Date: Aug 2013
Location: Falls Church, Virginia
Posts: 3,600
|
somebody please make a Wickerbill for a 2010 spoiler
__________________
"You simply cannot trust quotes found on the internet." -Abraham Lincoln
|
12-09-2014, 11:45 AM | #9 |
Drives: 62 Chevy & 2021 1SS/1LE manual Join Date: Aug 2010
Location: Kentucky
Posts: 893
|
the new JRod Motorsports Aluminum Gurney Lip is a nice piece for a 2010 . havent tested it yet.
|
12-09-2014, 01:07 PM | #10 |
Drives: 2014 1ss 1le Blk/Blk Join Date: Mar 2014
Location: NorCal
Posts: 44
|
If you do one end you must do the other end.
Delicate balance between front and rear aero. |
12-09-2014, 01:20 PM | #11 | |
Drives: 62 Chevy & 2021 1SS/1LE manual Join Date: Aug 2010
Location: Kentucky
Posts: 893
|
Quote:
Check! |
|
12-09-2014, 03:31 PM | #12 |
Drives: 2010 Silverado. Stock height now Join Date: Oct 2014
Location: Springfield Va
Posts: 307
|
Chevy sells the carbon hood insert. It's an option when ordering a camaro.
|
12-09-2014, 03:50 PM | #13 |
Huge Chevy Fan
Drives: 14' 2SS/RS 1LE built 4/22/14 Join Date: Apr 2012
Location: Billings, MT
Posts: 838
|
I had my hood insert done with hydrographics and it was a lot nicer paying $100 compared to $2500 for the Chevy one. The weight is almost the same too.
__________________
2014 2SS/RS Red Rock Metallic, Recaro seats, sunroof, NPP, Nitto Motivo 275/40/20 front 315/35/20 back, Cold air inductions intake, elite catch can, Stainless Works 1 7/8" long tube headers w/hiflow cats, 20% tint, Intake rod mod by Gwatney Performance, Bo White ported & polished throttle body, powerbond 25% UDP, Howards Cam 226/236 duration- 525/525 lift 110 ....with a WHOLE bunch of fun added!!
|
12-09-2014, 04:05 PM | #14 |
|
Does anyone make a 2014+ 1LE splitter extension to go with the wicker bill?
__________________
Used Racing Brake 2 Peice Rotors for sale:
http://www.camaro5.com/forums/showthread.php?t=344754 Summit White 2014 2SS 1LE Recaros, NPP exhaust, Nav 2010 2SS A6 - sold. |
|
|
|
|