You are browsing camaro5 
 |
|
04-16-2015, 12:39 AM
|
#1 |
 Drives: 2014 Camaro Join Date: Aug 2013
Location: Long Island
Posts: 2
|
Carbon Fiber Stripes
Hi, i want to get carbon fiber stripes on my 2014 Camaro. Any suggestion where i can get it done from in Long Island - NY
|
|
|
|
04-16-2015, 12:41 AM
|
#2 |
 
Drives: Solstice GXP Join Date: Jul 2014
Location: DFW
Posts: 175
|
Do you want real carbon fiber and then paint the rest the color of the car and leave the CF expose? or do you mean that 3d vinyl stuff? The vinyl stuff may "clog" from dirt and stuff....maybe someone else who has had it can chime in
|
|
|
|
|
04-16-2015, 12:46 AM
|
#3 |
|
Drives: 2014 Camaro Join Date: Aug 2013
Location: Long Island
Posts: 2
|
3d Vinyl.
|
|
|
|
|
04-19-2015, 12:47 AM
|
#4 |
 
|
You could try eBay. Just tell them the patter you want and they will do them for you
|
|
|
|
|
04-21-2015, 01:25 PM
|
#5 |
|
BUMBL Z
|
what kind of stripes are you looking for, design-wise? for vinyl, you could order 3m's DI-NOC carbon fiber vinyl. I did this with 3M's 1080 film in matte black, and I used knife-less tape to cut the spears out
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq  |
|
|
|
|
06-16-2015, 07:53 PM
|
#6 |
|
So easy to love Camaros
|
Not sure if you got yours done, but here is how mine came out....They are 3M vinyl, don't clog and look great. Bought from BigWorm Graffix and had them installed by "Stick it Graffics" in Waterbury, CT. Lifetime warranty on the install.
__________________
 |
|
|
|
|
06-17-2015, 08:40 PM
|
#7 |
|
"Camaro Joe"
Drives: 2010 SILVER ICE 2LT/RS CAMARO Join Date: Feb 2010
Location: long island ny
Posts: 2,366
 |
go over to phoneminal vinyl in oceanside, speak to matt tell him camaro joe sent you. he does amazing work and will get you exactly what you want
|
|
|
|
|
06-17-2015, 10:32 PM
|
#8 |
 
Drives: 2014 yellow 2SS/RS Join Date: Apr 2015
Location: Stoney Creek, Ontario
Posts: 488
|
I ordered a roll of 3D carbon fibre vinyl off eBay and cut the stripes to the width I wanted and did it myself. Excellent quality imo. Didn't cost very much either.
__________________
K&N, Borla ATAK axle back, resonator delete, Speed Engineering headers,Vitesse, Zl1 wheels, ACS rocker panels, 1LE splitter
 |
|
|
|
 |
|
|
