American Authority Louvers

whiskeyfed · 02-26-2018, 10:20 AM

Just got these hot off the press from American Authority. QUALITY piece here. I don't imagine there is any rattling with a stock exhaust but mind does a little bit on the edges. Certainly no touching the window in the center portion as I have head IKON's option does.

Took about 10 minutes to install and I LOVE the look.

$150 from AA, free shipping.

nbryant · 02-26-2018, 06:19 PM

Personally I prefer the design concept that MRT had for the '15. The staggered design doesn't appeal to me but to each their own. Don't think MRT are doing any for the GEN 6 though, it's a shame.

Just noticed you are in Stratford. Just spent 2 of the last 4 weeks up there discussing the VH-92.

whiskeyfed · 02-26-2018, 08:58 PM

Quote:

Originally Posted by nbryant

Personally I prefer the design concept that MRT had for the '15. The staggered design doesn't appeal to me but to each their own. Don't think MRT are doing any for the GEN 6 though, it's a shame.

Just noticed you are in Stratford. Just spent 2 of the last 4 weeks up there discussing the VH-92.

Over at Lockheed?? I live about a half mile down the road from there. Only 1 turn haha. But yeah I always liked louvers so I jumped on a set. I’m not sure what MRT has but since you said staggered I assume it’s like the late 60-early 70 aluminum louvers.

Dubchitts · 02-26-2018, 10:19 PM

Any pics from inside? I wonder if you took some thin 3m padding if you could stop the rattle

whiskeyfed · 02-27-2018, 09:12 AM

Quote:

Originally Posted by Dubchitts

Any pics from inside? I wonder if you took some thin 3m padding if you could stop the rattle

That's exactly my plan. Ill get a pic from the inside when I leave work today.

Darth Martel · 04-09-2018, 06:19 AM

Got mine painted and installed it this weekend.

whiskeyfed · 04-10-2018, 07:53 AM

Looks great! I love the look of these louvers on the 6th gen.

DWS909 · 04-10-2018, 09:10 AM

Darth Martel, where did you get the side window louvers?

Darth Martel · 04-10-2018, 06:51 PM

https://www.ikonmotorsports.com/fits...w-louvers.html

Ikon for the side louvres and AA for the rear window. Best of both worlds

My ZL1 spoiler if from Ikon as well. And I'll probably get the side skirts from AA. My car is a mutt but she a mean bitch.

Quote:

Originally Posted by DWS909

Darth Martel, where did you get the side window louvers?

Phidelt59 · 04-19-2018, 02:23 PM

I was thinking about getting to these. Any pics from the rearview mirror inside if possible? Also how hard is it to clean the rear window with these on?

whiskeyfed · 04-20-2018, 07:18 AM

Quote:

Originally Posted by Phidelt59

I was thinking about getting to these. Any pics from the rearview mirror inside if possible? Also how hard is it to clean the rear window with these on?

Ill try to remember to take a pic from the inside today. It comes off in about 2 minutes and goes back on in 2 minutes. I just take them off when i clean the window. However, it is probably possible to clean the window, but itll be difficult.

theCATALYST · 04-20-2018, 08:52 AM

Quote:

Originally Posted by Dubchitts

Any pics from inside? I wonder if you took some thin 3m padding if you could stop the rattle

Quote:

Originally Posted by Phidelt59

I was thinking about getting to these. Any pics from the rearview mirror inside if possible? Also how hard is it to clean the rear window with these on?

If it is any help, I have a couple of pics from the inside on my build thread.
http://www.camaro6.com/forums/showth...=519264&page=4

whiskeyfed · 04-23-2018, 12:06 PM

Inside pics. Sorry about the tires. Also don't know how to resize. These might be huge.

whiskeyfed · 04-23-2018, 12:07 PM

Aaaaaaand they're huge...

02-26-2018, 10:20 AM	#1
whiskeyfed Pat Drives: 2017 Camaro 1LT I4 Turbo A8 Join Date: Nov 2016 Location: Stratford, CT Posts: 827 View My Garage	American Authority Louvers Just got these hot off the press from American Authority. QUALITY piece here. I don't imagine there is any rattling with a stock exhaust but mind does a little bit on the edges. Certainly no touching the window in the center portion as I have head IKON's option does. Took about 10 minutes to install and I LOVE the look. $150 from AA, free shipping. Attached Images __________________ Follow me on Instagram @whiskeyfed Subscribe on YouTube Whiskeyfed Camaro Follow my Build Thread The WhiskeyFed Camaro Current Modifications: JacFab Boost-O-Lator, Injen Evolution CAI, ZZP Catless Downpipe, RPM 3" Charge Pipe, Mishimoto Oil Filtration/Coolant Systems, R1 Concepts Brakes Package, Eibach Pro-Kit Lowering Springs, PTP Lava Exhaust Wrap & Turbo Blanket DYNO SHEET: 297whp / 374wtq Tuned by #danytechtuning

02-26-2018, 06:19 PM	#2
nbryant Drives: 2016 2SS Red Hot Join Date: May 2016 Location: Southern Maryland Posts: 627	Personally I prefer the design concept that MRT had for the '15. The staggered design doesn't appeal to me but to each their own. Don't think MRT are doing any for the GEN 6 though, it's a shame. Just noticed you are in Stratford. Just spent 2 of the last 4 weeks up there discussing the VH-92. __________________ 2SS, A8, NPP, Nav, Sun Roof, Bose Audio, MM Catch Can, RPI chin splitter

02-26-2018, 10:19 PM	#4
Dubchitts Drives: '17 Red hot 2ss, 16 Focus RS Join Date: Aug 2015 Location: Michigan Posts: 845 View My Garage	Any pics from inside? I wonder if you took some thin 3m padding if you could stop the rattle __________________ "Spitfire" 427ci 2017 Red Hot 2SS// 6 Piston Brembos//Adrenaline Red Interior, Knee Pads//M6//MRC Afe Air Filter//BMR MM010 Motor Mounts, Safety Loop//Custom OTR Intake//Flex Fuel Kit//Gforce 3.5" Aluminum Driveshaft//GM 95mm TB//Katech Oil Pump, Piston Squirters//Kooks 1-7/8 LT//LT4 Fueling//Mighty Mouse Wild//Monster Clutch LT1-S Triple Disc//MSD 2-Step//Pray Performance Custom Spec Cam, Ported Holley Hi-Ram//Sikky 12" Shifter w OEM Knob Mod//Tick Level 1 Tr6060//Labor by Me//Tune By Pray Performance

04-09-2018, 06:19 AM	#6
Darth Martel Darth Martel Drives: Black 1SS with 20% tinted windows Join Date: May 2009 Location: Bizzaroland Posts: 1,496	Got mine painted and installed it this weekend. Attached Images __________________ 2016 Black 1SS w/ MRC, low-gloss black wheels, auto trans. Self-created custom Dark Knight Edition accents. Rotofab CAI with dry filter and sound tube delete, PRAY ported intake manifold and throttle body, Texas Speed cam, Stainless Works headers and exhaust, Skid Mark garage E85 kit, JMS fuel pump voltage booster, Circle D torque converter. Custom E85/mod tune by Jannetty Racing.

04-10-2018, 07:53 AM	#7
whiskeyfed Pat Drives: 2017 Camaro 1LT I4 Turbo A8 Join Date: Nov 2016 Location: Stratford, CT Posts: 827 View My Garage	Looks great! I love the look of these louvers on the 6th gen. __________________ Follow me on Instagram @whiskeyfed Subscribe on YouTube Whiskeyfed Camaro Follow my Build Thread The WhiskeyFed Camaro Current Modifications: JacFab Boost-O-Lator, Injen Evolution CAI, ZZP Catless Downpipe, RPM 3" Charge Pipe, Mishimoto Oil Filtration/Coolant Systems, R1 Concepts Brakes Package, Eibach Pro-Kit Lowering Springs, PTP Lava Exhaust Wrap & Turbo Blanket DYNO SHEET: 297whp / 374wtq Tuned by #danytechtuning

04-10-2018, 09:10 AM	#8
DWS909 Drives: 2016 Camaro 1LT RS Turbo Join Date: Nov 2016 Location: Seattle Posts: 41	Darth Martel, where did you get the side window louvers?

04-19-2018, 02:23 PM	#10
Phidelt59 Drives: 2016 Camaro SS Join Date: Feb 2013 Location: Pensacola, FL Posts: 194 View My Garage	I was thinking about getting to these. Any pics from the rearview mirror inside if possible? Also how hard is it to clean the rear window with these on? __________________ Camaro 2SS Hyper Blue Metallic/Kalahari 6M, NPP, MRC, NAV Black 5 Spoke

04-23-2018, 12:06 PM	#13
whiskeyfed Pat Drives: 2017 Camaro 1LT I4 Turbo A8 Join Date: Nov 2016 Location: Stratford, CT Posts: 827 View My Garage	Inside pics. Sorry about the tires. Also don't know how to resize. These might be huge. Attached Images __________________ Follow me on Instagram @whiskeyfed Subscribe on YouTube Whiskeyfed Camaro Follow my Build Thread The WhiskeyFed Camaro Current Modifications: JacFab Boost-O-Lator, Injen Evolution CAI, ZZP Catless Downpipe, RPM 3" Charge Pipe, Mishimoto Oil Filtration/Coolant Systems, R1 Concepts Brakes Package, Eibach Pro-Kit Lowering Springs, PTP Lava Exhaust Wrap & Turbo Blanket DYNO SHEET: 297whp / 374wtq Tuned by #danytechtuning

04-23-2018, 12:07 PM	#14
whiskeyfed Pat Drives: 2017 Camaro 1LT I4 Turbo A8 Join Date: Nov 2016 Location: Stratford, CT Posts: 827 View My Garage	Aaaaaaand they're huge... __________________ Follow me on Instagram @whiskeyfed Subscribe on YouTube Whiskeyfed Camaro Follow my Build Thread The WhiskeyFed Camaro Current Modifications: JacFab Boost-O-Lator, Injen Evolution CAI, ZZP Catless Downpipe, RPM 3" Charge Pipe, Mishimoto Oil Filtration/Coolant Systems, R1 Concepts Brakes Package, Eibach Pro-Kit Lowering Springs, PTP Lava Exhaust Wrap & Turbo Blanket DYNO SHEET: 297whp / 374wtq Tuned by #danytechtuning

User Name		Remember Me?
Password