01-12-2018, 01:20 PM | #1 |
Drives: 2018 Red Hot ZL1 1LE Join Date: May 2017
Location: Tampa, FL
Posts: 562
|
Help: Wheel Offset/Tire Question
So, I've gone ahead and ordered these wheels, which I got confirmation will fit.
I'll be using these to putter around town with for now and keep the OEM for track days. Looking at the Hankook Ventus V12. Going with a 305 rear, but wondering if I can use a 295 on the front instead of the recommended 285. Anyone know if this will cause an issue? http://www.phastekperformance.com/20...rr-m716-19.htm
__________________
2018 RED HOT ZL1-1LE: Nav,PDR,Floor Mats
Built! |
01-12-2018, 02:00 PM | #2 |
Drives: Fast Join Date: Mar 2015
Location: Michigan
Posts: 3,696
|
Are you going OEM wheel sizing? Which I believe is an 11" front? In which case, a 295 may be necessary. If you're running a 10" wide front like a NON-1LE ZL1, then you'd also be safe with a 295 also. The ZL1 1LE has room for a 305 on an 11" wheel and was tuned for it. By going 305/285, you're at regular ZL1 sizing. I'd stick to original proportions or close to it. I'd run a 315/295 or similar.
|
01-12-2018, 02:01 PM | #3 |
Drives: 2018 Red Hot ZL1 1LE Join Date: May 2017
Location: Tampa, FL
Posts: 562
|
These are replica. Not OEM.
The wheel size is a 19x10, which would take a 295 no problem. I am not sure if the offset of the wheel, with a 295 tire, will experience rubbing etc. A 285 is what is recommended, but I want to make sure the extra 10mm won't really come into play.
__________________
2018 RED HOT ZL1-1LE: Nav,PDR,Floor Mats
Built! |
01-12-2018, 02:04 PM | #4 | |
Drives: 2017 1SS/1LE Join Date: Sep 2016
Location: FL Panhandle
Posts: 1,559
|
Quote:
|
|
01-12-2018, 02:05 PM | #5 |
Drives: 2018 Red Hot ZL1 1LE Join Date: May 2017
Location: Tampa, FL
Posts: 562
|
It will be a 295/30/19
__________________
2018 RED HOT ZL1-1LE: Nav,PDR,Floor Mats
Built! |
01-12-2018, 02:06 PM | #6 |
Drives: 2017 1SS/1LE Join Date: Sep 2016
Location: FL Panhandle
Posts: 1,559
|
|
01-12-2018, 02:06 PM | #7 |
Drives: 2018 Red Hot ZL1 1LE Join Date: May 2017
Location: Tampa, FL
Posts: 562
|
Thank you!
__________________
2018 RED HOT ZL1-1LE: Nav,PDR,Floor Mats
Built! |
01-12-2018, 02:13 PM | #8 |
Drives: 2018 ZL1 1998 SS 1992 Typhoon Join Date: Nov 2015
Location: RR
Posts: 262
|
The offset calculator I use, says you will have 1mm more clearance on the inside over stock. But your outer position will be pushed in by 25mm, that will have a big effect visually, but no effect on clearance.
|
01-12-2018, 02:19 PM | #9 |
Drives: 2018 Red Hot ZL1 1LE Join Date: May 2017
Location: Tampa, FL
Posts: 562
|
Awesome!
The factory shoes stick out far, so that's not really a huge issue. Appreciate the help!
__________________
2018 RED HOT ZL1-1LE: Nav,PDR,Floor Mats
Built! |
01-12-2018, 02:38 PM | #10 | |
@zle_blackwing
Drives: 2018 ZL1 1LE Join Date: Mar 2017
Location: S OC
Posts: 1,390
|
Quote:
__________________
2018 ZL1 1LE - Red Hot, Nav, PDR
|
|
01-12-2018, 02:41 PM | #11 |
Drives: 2018 Red Hot ZL1 1LE Join Date: May 2017
Location: Tampa, FL
Posts: 562
|
I won't really be using them for any performance. That's what the 3Rs will be for. But I agree, I am just wanting to use an around town.
__________________
2018 RED HOT ZL1-1LE: Nav,PDR,Floor Mats
Built! |
01-12-2018, 03:28 PM | #12 |
Drives: SS-6-SPD Join Date: Jan 2017
Location: New Jersey
Posts: 1,364
|
what's wheel specs? 19x10 + "offset" ?
if offset is +20 - +22 with 295/30 it will be fine.. ( will stick out past the fender ) should get rock guards. |
01-24-2018, 02:32 PM | #13 |
Drives: 2017 ZL1 A10 HBM & 2012 2SS M6 IBM Join Date: Jul 2009
Location: Dallas, GA
Posts: 267
|
Which Offset Calculator are y’all using?
__________________
2017 ZL1 Hyper Blue Metallic, A10 Trans, CF Hood, NAV, PDR, Sunroof, aFe Momentum GT CAI, Vmax Motorsports TB, ARH LT CAV8-16200300FSQWC (Daily Driver)
576 RWHP/575 RWTQ 2012 2SS/RS IBM Technostalgia LED taillights, Magnuson TVS2300 & 3.40 Pulley, Vengeance Racing VRPD-2 Cam Kit, ZL1 Fuel Pump, Injector Dynamics ID850 Injectors, Forced Induction Interchiller, Cold Air Inductions CAI, BBK 40210 LT Headers & Free Flow Cats, MBRP S7022409 T409-Stainless Steel 3" Dual Cat Back Exhaust System, Lingenfelter ZR1 Dual Disc Clutch Kit, ZL1 Brake Kit Rotors & Calipers 628 RWHP/596 RWTQ / A.C.E.5 |
01-24-2018, 03:26 PM | #14 |
Drives: 2017 ZL1 Join Date: Mar 2014
Location: DFW, TX
Posts: 302
|
|
|
|
Post Reply
|
|
|