P2097 CEL CODE AFTER HFC INSTALL - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

bionick · 11-11-2013, 12:18 AM

Yes i know this is the V8 section, I'm posting this here because i didn't get much answers in the LFX section. Since the code is the same thing on all models I figured you guys could give me some answers.
But basically, I have had no problems with my vehicle (2012 LFX). Last Friday, I installed the Solo performance High Flow cats designed for the LFX. I've put on a good couple hundred miles on them since the install and then today as I was driving to California from Phoenix and my CEL Came on so I called OnStar and they said the code was P2097. I'm assuming this issue is due to the high flow cats, any suggestions?
Also, I know what the code means, I'm just looking for some diagnostics/tips to resolve the issue.

The Blue Ox · 11-11-2013, 01:43 PM

Are you using the O2 extensions? I would double check the sensors into the extensions and make sure everything is tight to start!

bionick · 11-11-2013, 04:21 PM

Quote:

Originally Posted by The Blue Ox

Are you using the O2 extensions? I would double check the sensors into the extensions and make sure everything is tight to start!

Yes I am using the o2 extenders, and everything seems to be pretty tight! I'm gonna double check though

11-11-2013, 12:18 AM	#1
bionick Drives: 2010 2SS/RS M6 Join Date: Oct 2013 Location: Gilbert, AZ Posts: 931 View My Garage	P2097 CEL CODE AFTER HFC INSTALL Yes i know this is the V8 section, I'm posting this here because i didn't get much answers in the LFX section. Since the code is the same thing on all models I figured you guys could give me some answers. But basically, I have had no problems with my vehicle (2012 LFX). Last Friday, I installed the Solo performance High Flow cats designed for the LFX. I've put on a good couple hundred miles on them since the install and then today as I was driving to California from Phoenix and my CEL Came on so I called OnStar and they said the code was P2097. I'm assuming this issue is due to the high flow cats, any suggestions? Also, I know what the code means, I'm just looking for some diagnostics/tips to resolve the issue. __________________ 2010 Camaro 2SS/RS \| 416 LS3 \| FED stage 2 heads

11-11-2013, 01:43 PM	#2
The Blue Ox Drives: 2010 SS L99 Inferno Orange Join Date: Apr 2012 Location: Texas Coast Posts: 1,167	Are you using the O2 extensions? I would double check the sensors into the extensions and make sure everything is tight to start!