11-30-2021, 09:51 AM | #1 |
Drives: V8 permagrin Join Date: Jul 2008
Location: here
Posts: 613
|
PPF question
for anyone who covered their front end with paint protection film, I was wondering how it has held up and if there are seams. Thanks in advance.
I'm looking at coverage for the front and wondering how many seams i'd end up with installation. If anyone has pics handy i'd love to see them as well. Last edited by roorback; 11-30-2021 at 10:22 AM. |
11-30-2021, 12:27 PM | #2 |
Drives: 2015 Z/28, 2015 1LE Join Date: Feb 2017
Location: Nevada
Posts: 583
|
I have seams on the edges in the top corners of the headlights where it meets the fenders. If that makes sense? Where the top part of the bumper rolls around to the side of the bumper. It’s not noticeable unless the car is dirty. Car is white. So dirt gets in the seam a tad but is good when clean. I also have seams where it didn’t go all the way to the headlight and grille. But that’s not noticeable at all. Don’t have any pics handy but hopefully that helps!
And I’ve had it on the front for less than a year. Has held up well though |
|
|
|
|