09-11-2023, 04:12 PM | #29 |
Drives: 23 Camaro ZL1 1LE Join Date: Apr 2022
Location: NH
Posts: 48
|
I'm not 100% sure and assume there would be some carryover with the BW parts, but can say for me i was finding some minor differences between Z28, C6, C7 parts. What i was finding with some of the other rotors, is that the part #'s may be different for different models because the rotor hat is different (which changes the offsets of the rotor). However the CC rotor disc itself was the same. The part numbers from GM change as they only sell the rotors with the hat and hardware attached to the disc and do not offer part numbers for each component of the rotor. With calipers, i am also finding the castings from brembo are the same, the differences lie in the colors and decals/markings applied and hence changes the GM part numbers.
__________________
23 Camaro ZL1 1LE PDR 6SPD
22 BMW X5 M50i 19 GMC 3500HD Denali 16 BMW 535xi 05 Pontiac GTO 6MT 88 Ford Thunderbird TC 87 Buick GN |
10-11-2023, 08:08 PM | #30 |
Drives: 23 Camaro ZL1 1LE Join Date: Apr 2022
Location: NH
Posts: 48
|
Just a quick sneak peak at the progress so far…… More details if folks want. All parts used were factory GM parts. Powder coating done by Drew at F14 powder coating in Texas.
__________________
23 Camaro ZL1 1LE PDR 6SPD
22 BMW X5 M50i 19 GMC 3500HD Denali 16 BMW 535xi 05 Pontiac GTO 6MT 88 Ford Thunderbird TC 87 Buick GN |
10-11-2023, 10:00 PM | #31 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,627
|
It's already a thing of beauty oozing quality throughout. Can't wait for your full review at the end
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
10-14-2023, 12:47 PM | #32 |
Drives: 2019 "CRUSH" ZL1 CAMARO Join Date: Sep 2019
Location: Wisconsin
Posts: 54
|
LOOKS KILLER! Can't wait to see the finished look on the ground with the wheels on.
|
10-14-2023, 03:09 PM | #33 |
Drives: ZLE/DEMON/GLADIATOR/GSXR1000R/ZX10R Join Date: Aug 2022
Location: New York
Posts: 438
|
Top Quality Mod...and not typical either.
__________________
2018 Dodge Demon #1399 2020 Jeep Gladiator Rubicon 6 speed manual 2023 ZL1 1LE 6 speed manual ************************* 2018 Suzuki GSXR 1000R 2021 Kawasaki ZX10R |
10-14-2023, 03:53 PM | #34 |
Drives: 2022 ZL1 1LE Join Date: Sep 2015
Location: AZ
Posts: 260
|
Hi all,
SpeedySteve77, great job with the mod. The listing you did will make it easier for the rest of us to complete this change. I must say, the OEM CCB package on my ‘15 Z/28 were hands down the very best brakes I’ve ever experienced in my life. I can’t wait to try these on my ‘22 ZLE!! Again, Great job!! JJ
__________________
2018 ZL1 1LE, NGM, Nav, PDR, born 11/22/17 SOLD
2022 ZLE, MH3, WCT, Nav, PDR, born 10/21-5/22!!! 2021 F-250 FX4 2023 Hyundai SF Calligraphy |
10-14-2023, 04:11 PM | #35 |
Drives: 23 Camaro ZL1 1LE Join Date: Apr 2022
Location: NH
Posts: 48
|
Factory upgrade is completed. I definitely can feel the difference in weight savings, but have not fully pushed the car aggressively yet. The brakes do bite fairly hard as they warm up, but at first when cold do have a slightly soft feel to them. But then again with r compound tires that have to warm up before grip, it does not bother me. Overall the upgrade went fairly smooth and as expected. I will post all the parts used throughout the build soon enough. My overall cost was slightly higher than normal as i opted to buy new 1LE factory front calipers and rotors so i had an entire set to revert to stock whenever. This was partially due to my desire to have all the calipers powdercoated to match my body color. Ive attached more pics below. Also opted for another personal touch on my supercharger cover while i had calipers at the powdercoater. Decided to have the machined area done to match my body color also. At the end of the day, i am super pleased and absolutely love the look and feel of the brakes. Besides, what is not to love about doing a factory GM upgrade on your GM vehicle!!! Enjoy the pics!
__________________
23 Camaro ZL1 1LE PDR 6SPD
22 BMW X5 M50i 19 GMC 3500HD Denali 16 BMW 535xi 05 Pontiac GTO 6MT 88 Ford Thunderbird TC 87 Buick GN |
10-14-2023, 05:03 PM | #36 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,627
|
I'll venture that you have one of the best Camaro brake setups on the forum, and your engine bay doesn't look too shabby either.
Congratulations again, fantastic work and a pristine setup (me drooling quietly in the background )
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
10-14-2023, 05:09 PM | #37 |
Drives: 1969 Z28,1992 Z28,1994 Z28,1999 SS Join Date: Oct 2021
Location: Jamestown, ND
Posts: 1,154
|
Wow! What a great upgrade! Fantastic work, Steve!!!
__________________
24 2SS 1LE, Riptide Blue, A10, PDR. Picked up 11/5/23, 560 miles.
23 ZLE Rapid Blue, M6. 6/27/22 TPW. Off assembly line on July 12th, 2022. To Dealer August 6th. Delivered August 8th. 129 miles. 99 SS Vert, Hugger Orange, A4, 806 miles 94 Z28, Black, M6, 595 miles 92 Z28, last car built at Van Nuys Plant, Red, A4, 125 miles www.last1992camaro.com 69 Z28, Dusk Blue, M4 29 Ford Business Coupe 28 Ford Pickup 24 GMC Denali 2500HD CCSB 4x4 22 Jeep Grand Cherokee 13 Ford F150 Crew Cab 4x4 |
10-14-2023, 06:42 PM | #38 |
fo'shizZL1
Drives: 2017 ZL1 Join Date: Aug 2017
Location: ATL
Posts: 1,281
|
Yeah this is amazing, high quality, factory option looking stuff right here. Very well researched and executed!! I love everything about it
__________________
2017 ZL1 M6 Black | Maggie 2650 // 103TB // Big Gulp
Past Rides- 2014 ZL1 M6 Red Hot | Tons of mods 2004 CTS-V M6 Silver | Many mods 1995 Corvette M6 Torch Red | A few more mods 1992 Camaro M5 White | A few mods |
10-14-2023, 08:06 PM | #39 |
Drives: 2020 ZL1 1LE Join Date: Sep 2012
Location: Austin, Texas
Posts: 1,335
|
Interested! Please post part #s. 55lb of unsprung weight is a lot!
__________________
2020 ZL1 1LE [Moroso SC Expansion Tank, otherwise stock]
|
10-16-2023, 07:32 AM | #40 |
Drives: 2019 "CRUSH" ZL1 CAMARO Join Date: Sep 2019
Location: Wisconsin
Posts: 54
|
Love It! Welcome to the club.
|
10-16-2023, 01:16 PM | #41 |
Drives: Camaro ZL1, Golf GTI Join Date: Feb 2022
Location: Richmond, VA
Posts: 170
|
That looks fantastic! What’s your suspension setup?
__________________
’22 ZL1 Riverside Blue 6MT
’15 GTI Carbon Steel 6MT |
10-16-2023, 02:35 PM | #42 | |
Drives: 2024 Black ZL1, M6 Join Date: Mar 2014
Location: Murrieta, CA
Posts: 324
|
Quote:
__________________
|
|
|
|
Post Reply
|
|
|