04-19-2020, 03:48 PM | #1 |
Drives: '22 Summit White ZL1 A10 Join Date: Aug 2019
Location: Virginia
Posts: 459
|
1LE Style Wing Folks Need Help Please
Those that have a Carbon C7 1LE style wing.....would you please post a side view of the end plate & if possible check & post what the angle is, it would be greatly appreciated, thanks
SEE PIC |
04-19-2020, 07:55 PM | #2 |
Drives: '19 ZL1 1LE Join Date: Dec 2012
Location: O'Fallon, MO
Posts: 836
|
Sorry, I have no way to measure the angle of the top of the wing, but the bottom is 0 degrees and is perfectly level with the ground.
Sent from my iPad using Tapatalk |
04-19-2020, 08:35 PM | #3 |
Drives: '22 Summit White ZL1 A10 Join Date: Aug 2019
Location: Virginia
Posts: 459
|
Much appreciated MNPSmith
|
04-19-2020, 08:37 PM | #4 |
Drives: '19 ZL1 1LE Join Date: Dec 2012
Location: O'Fallon, MO
Posts: 836
|
|
04-28-2020, 09:33 PM | #5 |
Drives: 2018 NFG ZL1-1LE Join Date: Jun 2018
Location: Near the water
Posts: 304
|
Just in case anyone wants the specifics on a factory wing, here they are.
|
04-29-2020, 06:48 AM | #6 |
aka BeastZL1
Drives: 2019 Camaro ZL1 1LE, 2004 Cobra Join Date: Dec 2017
Location: NC
Posts: 1,104
|
Thanks for posting!
__________________
|
04-29-2020, 07:48 PM | #7 |
Drives: '22 Summit White ZL1 A10 Join Date: Aug 2019
Location: Virginia
Posts: 459
|
Thanks for those angles Rod
|
04-29-2020, 09:06 PM | #8 |
Drives: 2018 NFG ZL1-1LE Join Date: Jun 2018
Location: Near the water
Posts: 304
|
No problem. I figured a somewhat accurate set of measurements would help reduce the mystery.
|
|
|
Post Reply
|
|
|