American Racing Headers Does It Again! Quad Exhaust - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

phdjent · 02-01-2012, 09:24 PM

Well this was a mod that took a little longer than I expected. First I tried to have the rear diffuser custom made a certain way which didn't work out. Then I ordered one with the holes already widened by a fellow camaro5 member. When I got it from UPS both ends unfortunately were cracked. So I had my good friend at Radiance Autobody here in Deer Park Long Island do his magic and fix up the diffuser, sand it down and paint it Red Jewel to match the car. Perfect! Now off to ARH to have them make these tips fit. They really know there stuff. Dual 4 inch tips slightly rotated outwardly and staggered to the contour of the rear end of the car. Better than I could've even dreamed and the sound is only slightly louder when I get on it.

If anybody is interested in doing this and you plan on keeping the stock diffuser, you can only widen the holes inwardly so now ARH has the 4 inch quad tip design for an easy install. Here are some before and after pics.

[IMG]http://i1179.photobucket.com/albums/x382/phdjent/DS****91-2.jpg[/IMG]
[IMG]http://i1179.photobucket.com/albums/x382/phdjent/DS****90-1.jpg[/IMG]
[IMG]http://i1179.photobucket.com/albums/x382/phdjent/DS****97-1.jpg[/IMG]

Moreno1 · 02-01-2012, 09:29 PM

Looks realty good. I like how they are staggered.

allmotor · 02-02-2012, 04:42 AM

where did you get the rear fascia?

Good2go · 02-02-2012, 07:02 AM

Quote:

Originally Posted by Nathan Moreno

Looks realty good. I like how they are staggered.

phdjent · 02-03-2012, 11:38 AM

Quote:

Originally Posted by doublefatty

where did you get the rear fascia?

Thanks everyone. Sound video clip will be up very soon. I purchased the modified rear diffuser from forum member/sponsor 2SSRS. I then had it smoothed and painted to match my car. So many compliments in the few short days that I've had it on the car.

Outlaw77 · 02-03-2012, 11:56 AM

looks sweet!

Ivan @ Southwest Speed · 02-03-2012, 12:25 PM

Looks very ZL1ish!

Very nice, very clean.
Ivan

Ricky11SS · 02-03-2012, 01:34 PM

i want one too!

phdjent · 02-03-2012, 08:26 PM

I added a short video clip to the first post. Wish it was warm enough to shoot it with the top down. Oh well... spring is almost here.

andredmg · 02-03-2012, 08:36 PM

Very nice looking and sounding car, I like all your mods thus far. Those tips look killer.

Positronic · 03-02-2012, 09:12 AM

Gorgeous! Do you have a P/N by chance? I assume these were designed for ARH cat- or axle-backs?

phdjent · 03-02-2012, 10:24 AM

Quote:

Originally Posted by Positronic

Gorgeous! Do you have a P/N by chance? I assume these were designed for ARH cat- or axle-backs?

Thanks, These were designed for their mufflers so yes you would need at least their axle back. I'm not sure how they would line up with either stock or other after market exhausts. The best thing to do is call them and speak with Nick. Mention my red jewel vert. ARH - 866-982-1978

CooG · 03-02-2012, 10:33 AM

IMO - there is enough going on with the back of the Camaro w/out adding another pair of exhaust tips.

But....to each his own.

CamaroFan22 · 09-19-2012, 09:47 PM

Quote:

Originally Posted by doublefatty

where did you get the rear fascia?

I found it at www.gen5diy.com

02-01-2012, 09:24 PM	#1
phdjent Evan "FRESHAYR" Drives: 2014 Stingray Z51, 2014 Jeep SRT Join Date: Mar 2011 Location: Plainview,NY Posts: 313 View My Garage	American Racing Headers Does It Again! Quad Exhaust Well this was a mod that took a little longer than I expected. First I tried to have the rear diffuser custom made a certain way which didn't work out. Then I ordered one with the holes already widened by a fellow camaro5 member. When I got it from UPS both ends unfortunately were cracked. So I had my good friend at Radiance Autobody here in Deer Park Long Island do his magic and fix up the diffuser, sand it down and paint it Red Jewel to match the car. Perfect! Now off to ARH to have them make these tips fit. They really know there stuff. Dual 4 inch tips slightly rotated outwardly and staggered to the contour of the rear end of the car. Better than I could've even dreamed and the sound is only slightly louder when I get on it. If anybody is interested in doing this and you plan on keeping the stock diffuser, you can only widen the holes inwardly so now ARH has the 4 inch quad tip design for an easy install. Here are some before and after pics. [IMG]http://i1179.photobucket.com/albums/x382/phdjent/DS**91-2.jpg[/IMG] [IMG]http://i1179.photobucket.com/albums/x382/phdjent/DS90-1.jpg[/IMG] [IMG]http://i1179.photobucket.com/albums/x382/phdjent/DS*97-1.jpg[/IMG] __________________ Last edited by phdjent; 02-03-2012 at 08:24 PM.*

02-02-2012, 04:42 AM	#3
allmotor movin' down the motorway Drives: Summiit White 2SS/RS/M6 Join Date: Feb 2010 Location: Palmetto Fl and Peabody MA Posts: 740	where did you get the rear fascia? __________________ 417 stroker - Florida Speed and Power

02-03-2012, 08:26 PM	#9
phdjent Evan "FRESHAYR" Drives: 2014 Stingray Z51, 2014 Jeep SRT Join Date: Mar 2011 Location: Plainview,NY Posts: 313 View My Garage	I added a short video clip to the first post. Wish it was warm enough to shoot it with the top down. Oh well... spring is almost here. __________________

02-03-2012, 08:36 PM	#10
andredmg Big Nasty Drives: Chevys lots of em Join Date: Jun 2010 Location: Albuquerque NM Posts: 930	Very nice looking and sounding car, I like all your mods thus far. Those tips look killer. __________________

03-02-2012, 09:12 AM	#11
Positronic 2 Blessed 2 be Stressed Drives: '11 SGM 1SS/RS/M6 Join Date: Nov 2010 Location: IN, US Posts: 33	Gorgeous! Do you have a P/N by chance? I assume these were designed for ARH cat- or axle-backs? __________________

02-01-2012, 09:29 PM	#2
Moreno1 Drives: G5.R Join Date: Sep 2010 Location: SoCal Posts: 2,377	Looks realty good. I like how they are staggered.

02-03-2012, 11:56 AM	#6
Outlaw77 Drives: 2018 Charger SRT 392 F8 Green Join Date: Aug 2010 Location: Oakville Ontario, Canada Posts: 1,910	looks sweet!

02-03-2012, 12:25 PM	#7
Ivan @ Southwest Speed Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009 Location: Rio Rancho, NM Posts: 12,170	Looks very ZL1ish! Very nice, very clean. Ivan

02-03-2012, 01:34 PM	#8
Ricky11SS Drives: 2011 Camaro SS L99 Join Date: Dec 2011 Location: Hidalgo Tx Posts: 249	i want one too!

03-02-2012, 10:33 AM	#13
CooG RIP - Convertible SS Drives: '13 Mustang Boss 302 - RED Join Date: Apr 2011 Location: Houston, TX Posts: 960	IMO - there is enough going on with the back of the Camaro w/out adding another pair of exhaust tips. But....to each his own.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
22" American Racing Daytona VN801 staggered wheels - starting @ 1349.00 shipped	Speed Depot	Wheels / Tires	2	12-23-2011 01:42 AM
22" American Racing Boulevard VN805 staggered wheels - starting @ $ 1349.00 shipped	Speed Depot	Wheels / Tires	0	12-23-2011 12:28 AM
Full American Racing Headers to Catback Exhaust on the Convertible - Review	phdjent	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	6	08-22-2011 07:16 AM
American Racing Headers (ARH) New Full Exhaust System (Updated)	KILLER74Z28	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	102	08-08-2011 11:02 AM