Question to the people that have installed an LSA - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Mrbowtie26 · 08-20-2016, 02:12 PM

Quote:

Originally Posted by hammdo

Forgot about that one! 650 RWHP!

-Don

Wtf thats insane.... thats with a stage 1 cam and 2.75 pulley , cai, exhausr ? That's unbelievably insane lol

Jeff_SS · 08-20-2016, 02:23 PM

Quote:

Originally Posted by Mrbowtie26

Wtf thats insane.... thats with a stage 1 cam and 2.75 pulley , cai, exhausr ? That's unbelievably insane lol

It also depends on the dyno, keep that in mind.

Mrbowtie26 · 08-20-2016, 10:51 PM

Quote:

Originally Posted by Jeff_SS

It also depends on the dyno, keep that in mind.

Well considering his baseline was 397 with a ported tb and cai that seems right in line. My car with no mods and 500 miles dyno'd @387/387 so it seems pretty close considering his couple of mods

ADM PERFORMANCE · 08-21-2016, 06:49 AM

Quote:

Originally Posted by Mrbowtie26

Well considering his baseline was 397 with a ported tb and cai that seems right in line. My car with no mods and 500 miles dyno'd @387/387 so it seems pretty close considering his couple of mods

We just put down 700rwhp at 11 psi boost on a 2010 CAMARO SS TH-400 Automatic 417 Lsa blower,Stage 1 BTR cam and E85.

Mrbowtie26 · 08-21-2016, 09:41 AM

Quote:

Originally Posted by ADM PERFORMANCE

We just put down 700rwhp at 11 psi boost on a 2010 CAMARO SS TH-400 Automatic 417 Lsa blower,Stage 1 BTR cam and E85.

That's amazing. I don't currently have plans to go E85 as I know nothing about it but that's awesome

Dwright · 08-21-2016, 10:06 AM

Those are impressive numbers. I did a stage two vvt cam, Cnc heads and an lsa blower along with e85 and I was only hitting 476 rwhp but my belt was slipping and dropping to 4 lbs of boost at high rpms. But I couldn't get close to those numbers. The guy told me their dyno read low. If I hit those numbers I would be drooling.

Mrbowtie26 · 08-21-2016, 12:34 PM

Quote:

Originally Posted by Dwright

Those are impressive numbers. I did a stage two vvt cam, Cnc heads and an lsa blower along with e85 and I was only hitting 476 rwhp but my belt was slipping and dropping to 4 lbs of boost at high rpms. But I couldn't get close to those numbers. The guy told me their dyno read low. If I hit those numbers I would be drooling.

Have you ran 1/4 mile ?

wrtowman · 08-21-2016, 01:15 PM

Quote:

Originally Posted by Dwright

Those are impressive numbers. I did a stage two vvt cam, Cnc heads and an lsa blower along with e85 and I was only hitting 476 rwhp but my belt was slipping and dropping to 4 lbs of boost at high rpms. But I couldn't get close to those numbers. The guy told me their dyno read low. If I hit those numbers I would be drooling.

wait wut? You, sir, have been bamboozled. So you just said, "well that sucks, thanks. Bye."??????????

edit...nm, I see this is you...

http://www.camaro5.com/forums/showthread.php?t=463948

Dirtdog · 08-22-2016, 01:33 PM

Quote:

Originally Posted by wrtowman

9.1 lower, 2.5 upper, and E85.

that's basically what im doing now after a year at 550whp lol

08-21-2016, 10:06 AM	#20
Dwright Drives: 2011 Camaro 2ss Join Date: Dec 2015 Location: South Carolina Posts: 52 View My Garage	Those are impressive numbers. I did a stage two vvt cam, Cnc heads and an lsa blower along with e85 and I was only hitting 476 rwhp but my belt was slipping and dropping to 4 lbs of boost at high rpms. But I couldn't get close to those numbers. The guy told me their dyno read low. If I hit those numbers I would be drooling.