[glamcem]

Originally Posted by APEXRaceParts

You are a great asset to the community Cem, thanks for posting this material for others to see.

- Ryan

You're welcome and thanks for the kind words

[Lemooreace]

https://www.amazon.com/dp/B06XNKNZ7M..._P-IjAb7HX2SQR

Hub Centric Rings.... worked fine for me. Others say you really don’t need. The lugs will center you in. I’d rather be certain myself.

[apexit53]

Originally Posted by APEXRaceParts

Aside from those participating in this specific AutoX class, we do not believe there is enough overall consistent demand from the community to warrant production. Each new tooling has an up front associated cost, and each production run has minimum quantity requirements that we must keep in mind. We produce our wheels in large batches to ensure product is in stock in healthy numbers and to keep pricing palatable for our customers.

It is important to note that this is only the first wave of production, and after the most popular fitments are released, we will continue to expand the the Camaro line.
- Ryan

Good point. No to mention you have a size right now that would work for the camaro, just might need a hub ring to make it fit properly and that could be easy to source.

[Apex Wheels]

Thank you for the participation thus far, we have received just under 300 surveys from the Camaro5/6 community. If you have yet to fill out our wheel survey, please give us your feedback here. We are hoping to hear from a broader audience to confirm trends in the data.

There are many photo's circulating of our ARC-8 & PS-7 wheel designs on 5th snd 6th gen Camaro's, however we are working on putting together on-car photography of our FL-5 & SM-10 designs. These are our two newest designs which feature "I" beam spokes and reinforced lips, and we would like to give you guys an idea of what these wheel designs would look like on your Camaro in a 19" diameter.

- Ryan

[MatthewAMEL]

Originally Posted by APEXRaceParts

Thank you for the participation thus far, we have received just under 300 surveys from the Camaro5/6 community. If you have yet to fill out our wheel survey, please give us your feedback here. We are hoping to hear from a broader audience to confirm trends in the data.

There are many photo's circulating of our ARC-8 & PS-7 wheel designs on 5th snd 6th gen Camaro's, however we are working on putting together on-car photography of our FL-5 & SM-10 designs. These are our two newest designs which feature "I" beam spokes and reinforced lips, and we would like to give you guys an idea of what these wheel designs would look like on your Camaro in a 19" diameter.

- Ryan

My region just posted their event schedule for 2018.

My 1st points event is on 1/28. Are you going to have something available in time?

[tecmec]

Originally Posted by MatthewAMEL

My region just posted their event schedule for 2018.

My 1st points event is on 1/28. Are you going to have something available in time?

Ha

Sent from my Pixel 2 XL using Tapatalk

[Lemooreace]

Originally Posted by APEXRaceParts

however we are working on putting together on-car photography of our FL-5 & SM-10 designs. These are our two newest designs which feature "I" beam spokes and reinforced lips, and we would like to give you guys an idea of what these wheel designs would look like on your Camaro in a 19" diameter.

- Ryan

Ryan, I’m right here in San Ramon if you want to fit my car with these for another promo shoot... - Doug

[MatthewAMEL]

Received a response from Apex about availability dates.

Not soon, I am afraid.

They said March/April of 2018.

I’ll have to shop elsewhere.

[seanblurr]

How did I never realize that you guys are local? ha...

Want to make a ZL1 1LE fitment wheel? I could always use some spares

[Srt-cuatro]

Originally Posted by APEXRaceParts

Thank you for the participation thus far, we have received just under 300 surveys from the Camaro5/6 community. If you have yet to fill out our wheel survey, please give us your feedback here. We are hoping to hear from a broader audience to confirm trends in the data.

There are many photo's circulating of our ARC-8 & PS-7 wheel designs on 5th snd 6th gen Camaro's, however we are working on putting together on-car photography of our FL-5 & SM-10 designs. These are our two newest designs which feature "I" beam spokes and reinforced lips, and we would like to give you guys an idea of what these wheel designs would look like on your Camaro in a 19" diameter.

- Ryan

I would love FL-5s in 19x10 +20 front and 19x11 +43 in the rear. SM-10s in the same sizes would be a close second. Third would be 18x10 +20 fronts to match with the already available 18x11 +44.

[RideZX6R]

Originally Posted by MatthewAMEL

Received a response from Apex about availability dates.

Not soon, I am afraid.

They said March/April of 2018.

I’ll have to shop elsewhere.

Same - Can't wait that long :(

[SloCal]

Originally Posted by APEXRaceParts

Calling all Camaro Performance Driving Enthusiasts!

Our staff has communicated with the Camaro enthusiast community for well over two years now, and I speak for the whole team when I say that we’re ecstatic to get the wheels rolling (pun intended) on developing off-the-shelf lightweight fitments that are perfect for your Camaro.

I believe the saying goes, “lightweight, strong and affordable; pick two”. APEX has disrupted this thought process for over 10 years now, and once we get a better understanding of your preferences for an affordable (yet race-proven) set of shoes for your car, we’ll put our creative and engineering minds to work to develop a lineup of APEX wheels that makes sense. Street, track, or race, we’ve got you covered.

The best way to help would be to tell us a bit more about what you’d look for and expect in a set of APEX wheels for your Camaro. When you grab your next cup of coffee, could you take a minute to share your thoughts with us?

[ TAKE OUR CAMARO SURVEY ]


LEARN MORE ABOUT APEX

The mission of this thread is to re-engage with the 5th and 6th Gen Camaro community, as many owners have already adopted our BMW wheels for their Camaro. For those whom we have not yet had the pleasure of working with, since 2007, our focus at APEX has been to produce high-performance wheels with extreme durability and unprecedented value for the performance driving community. Combining proven Motorsport design features, vehicle specific optimizations, and advanced Flow Forming Technology, we've created wheels that have taken BMW performance driving enthusiasts by storm. As a grassroots Motorsport oriented company, comprised of a diverse group of auto enthusiasts, we understand that enthusiasts from all corners of the car community seek quality products at a affordable price point, and that these should not be mutually exclusive.

YOU ARE IN THE DRIVERS SEAT

APEX does not view the car community through a traditional lens. Since inception, this company has worked hand in hand with enthusiasts through many channels, but much of what we have accomplished stems from our unique ability to incorporate forum members into product development. Rather than sitting around a conference table internally brainstorming a list of products that we feel are relevant to a specific community, we have made it our mission to enlist enthusiasts in the decision making process. Tell us where the market is currently missing the mark for you, and how we can employ our core competencies to fill the current pitfalls. The action of putting enthusiasts at the forefront of product development ensures that APEX delivers satisfactory products.

THE BIGGER PICTURE

We guarantee a different customer experience. Car nuts come in all shapes and sizes, and it is imperative to recognize that enthusiasts have different priorities, as well as short and long term goals for their machines. It is not until our product specialists have completed a needs assessment, that we can suggest a valuable and meaningful solution to our customers. Anything less would be a disservice. Manufacturing wheels that compliment the multitude of suspension, brakes, alignment settings and tires specifications instills confidence in our customer interactions.

SHOW US WHAT YOU CAN DO!

“All of this sounds great, but show me what you can do.” When track enthusiasts took delivery of their new BMW F8X M3/M4, they quickly realized that the standard 10” rear wheels were not cutting it, regardless of how sticky their 275 tires were. Drivers had to cautiously modulate the throttle out of mid-corner with the threat of upsetting the car, and therefore lap times were not an accurate depiction of what this new powerful platform was capable of. Correspondence poured in from the community, and after some validation from the community, a lightweight EC-7 18x11” ET44 was born. A strong 18" wheel that offered enough brake clearance for the massive OEM BBK, check. Precise and proven width and offset to support a 305 or 315 r-compound or slick without extensive modifications, check!

The following article should give you an insight to our process, and our devotion to the details: APEX Test Fitment - Squeezing a 315 R-Compound onto a stock F8X

Before we get too ahead of ourselves, we wanted to hear from you—the community. The best way that you could help us develop these new wheels would be to take the brief Camaro-specific survey.



Happy tracking,
Ryan

Where can i get that fender decal??

[Srt-cuatro]

Originally Posted by RideZX6R

Same - Can't wait that long :(

I don't mind waiting. These are some of the best wheels in the market.

[BradfordCamaro]

Originally Posted by Srt-cuatro

I don't mind waiting. These are some of the best wheels in the market.

HUH???