[JWMotoring]

Originally Posted by ExCrystal

Awesome! But they won't cause any issues with the car's electrical system right?

Correct, no issues.

Originally Posted by 1hprush

Curious as to what method you guys are using to do the install for the rear. I was able to access the side marker by reaching up under the rear bumper, but could only push out the bottom clip. However, because the top clip was still attached, I wasn't able to remove it. Guess I will have to lift the car to get the rear tires to drop enough to gain access to the 3 screws holding the fender liner in place and reach in and pop out both clips. Any other suggestions? Thx.

Check out the install video on our website. That should clear it up

http://www.jwmotorsportsllc.com/6th-...KED_p_340.html

[1hprush]

Originally Posted by JWMotoring

Correct, no issues.

Check out the install video on our website. That should clear it up

http://www.jwmotorsportsllc.com/6th-...KED_p_340.html

Thanks

[Ohji-san]

The video was helpful but I couldn't replicate what he did in the video and found it much easier to remove the two fasteners of the wheel well liners to get to the clips. But maybe because I have an 2LT RS and not an SS but I do have NPP and 20" wheels. The end result is well worth it. Nice product and great service.

[Chris C 1SS 1LE]

Mine arrive tomorrow. Will post a pic when done. Fully anticipate a mad rush on bright yellow paint by shops nationwide once these are on.

[JWMotoring]

Originally Posted by Ohji-san

The video was helpful but I couldn't replicate what he did in the video and found it much easier to remove the two fasteners of the wheel well liners to get to the clips. But maybe because I have an 2LT RS and not an SS but I do have NPP and 20" wheels. The end result is well worth it. Nice product and great service.

Glad you got them in!

Originally Posted by Chris C 1SS 1LE

Mine arrive tomorrow. Will post a pic when done. Fully anticipate a mad rush on bright yellow paint by shops nationwide once these are on.

Post up a pic when on!

[Chris C 1SS 1LE]

Aim to do it's this weekend. Assuming I can get my hands in enough to release clips. Hands about the size of Dallas and I dont want to screw with jacking it up or wheel removal. We'll see!

[Chris C 1SS 1LE]

This cat looks spent! No way I can get to them this way. Lethal has a vid too

[Chris C 1SS 1LE]

To boxes labeled front and rear. Opened them up and they look same to me. Guess I'll have to test each to make sure where they go. Probably ha e to. Jack up rear no love gritting one out.

[Chris C 1SS 1LE]

So the lead from these LED plug into? Each LED string in th markers all look orange to me

[ExCrystal]

Originally Posted by Chris C 1SS 1LE

To boxes labeled front and rear. Opened them up and they look same to me. Guess I'll have to test each to make sure where they go. Probably ha e to. Jack up rear no love gritting one out.

Originally Posted by Chris C 1SS 1LE

So the lead from these LED plug into? Each LED string in th markers all look orange to me

The markers I received were labeled correctly. Front = front; rear = rear.

Either way, they're easy to plug and play, so you can test which one's orange and which one's red.

[JWMotoring]

The rear of the markers will tell you where they go. They're labeled front right, rear right etc.

Take your fronts out of the box and find the correct orientation on the back. Same thing with the rears. You're done after that.

[DailyFifty]

Was looking at DD but couldn't pass up the price of these! Ordered mine!

[Chris C 1SS 1LE]

Those rear clips suck... Done. Looks great. As said, pics don't do it justice. Neighbor with ZL1 1LE is pondering...

[Chris C 1SS 1LE]

2 of 4.......