01-21-2018, 11:58 PM | #1 |
Drives: Mosaic Black ZL1 M6 Join Date: Jun 2017
Location: SOUTHERN CALIFORNIA
Posts: 118
|
Wheel question
Anyone know if you can fit a 325/30/20 with a 12” wide rear? Planning on doing. 305/30/20 with 20x11 front too. Any help would be appreciated.
Last edited by MOSAIC BLACK 1LE; 01-22-2018 at 03:13 PM. |
01-22-2018, 10:18 AM | #2 |
Drives: Fast Join Date: Mar 2015
Location: Michigan
Posts: 3,696
|
Uh, highly doubt that will fit.
|
01-22-2018, 10:24 AM | #3 | |
I used to be Dragoneye...
|
Quote:
If not a typo, you're looking at adding over 5 and a half inches to the overall diameter. +2.75" to the radius...if you aren't rubbing on metal just sitting on the ground, you will be as soon as the suspension compresses from sitting in it! |
|
01-22-2018, 03:12 PM | #4 |
Drives: Mosaic Black ZL1 M6 Join Date: Jun 2017
Location: SOUTHERN CALIFORNIA
Posts: 118
|
325/30/20. My bad
|
01-22-2018, 06:06 PM | #5 |
I used to be Dragoneye...
|
Whew!!!
That should be possible...if you hunt around this forum for wheel/tire threads, you're bound to find someone who did exactly what you're suggesting. But there might be rubbing issues to work out. Sorry I couldn't be more specific. Good luck! |
|
|
Post Reply
|
|
|