You are browsing camaro5 
 |
|
03-04-2017, 09:08 PM
|
#1 |
|
THE YETI
Drives: 2SS RS Join Date: Jan 2013
Location: chicago
Posts: 411
|
Magnuson-strut tower clearance
Like the title says will this supercharger fit under the gm strut towers brace. I know the new hatrtbeat will but I like this one. Anyone have one and does it clear.
__________________
Nickey stage 2 cam, ported heads, fast intake, AMR Headers, no cats, 3inch X pipe,under drive pully,ported throttle body, adm race scoop,AMD cold air, Nickey custom tune,catch can,1le 3:91,BMR trailing arms and outer bushing,toe rods,rear sway bar, tunnel brace,mr228 rims 315 nt05r
|
|
|
|
03-05-2017, 05:37 AM
|
#2 |
 Drives: 2012 L99 EU Join Date: Dec 2013
Location: Germany
Posts: 27
|
Yes, it will fit. Had this combination installed for about 3,5 years.
__________________
Camaro SS 2012 A6, Magnacharger TVS2300, LS3 Conversion, JRE Rough Idle Road Race Cam, GMPP CNC ported LS3 Cylinder Heads, Johnson Lifters, CHE Rocker Arms, Roto Fab Air Intake, LPE Twin Fuel Pump, ID850 Injectors, Pfadt Tri-Y Headers, Borla S-Type Exhaust
|
|
|
|
|
03-05-2017, 07:20 AM
|
#3 | |
|
THE YETI
Drives: 2SS RS Join Date: Jan 2013
Location: chicago
Posts: 411
|
Quote:
__________________
Nickey stage 2 cam, ported heads, fast intake, AMR Headers, no cats, 3inch X pipe,under drive pully,ported throttle body, adm race scoop,AMD cold air, Nickey custom tune,catch can,1le 3:91,BMR trailing arms and outer bushing,toe rods,rear sway bar, tunnel brace,mr228 rims 315 nt05r
|
|
|
|
|
|
03-05-2017, 08:48 AM
|
#4 |
 
|
worst case scenario, you can do like many of us LSA conversion guys do, and put small spacers under the brace to raise it up... I purchased some machined aluminum 3/8" spacers to place between the brace and the strut mounts. Most guys do 1/4" cut I wanted to make sure and only do it once.
Sounds like you don't have to worry though 
__________________
2014 L99 2SS. 595HP/571ft-lbs
Mods: LSA Conversion 2.5" Upper Pulley, 65# injectors, GPI SS1 Cam, SP Long Tubes, ADM Race Scoop & CAI, NPP exhaust (DIY control), BMR 1" lowering springs, ZL1 Rear Differential / Axles, CF Side Strip / Hood Spear, Tint - Windows / Tails / Sidemarkers, Splash Guards, ADM Boost Gauge, ABL Dashkit, '68 Script Badges, ACS T4 Splitter, ZL1 Rockers from Gary's, Z28 Spoiler, Carbon Fiber Hood Vent, Summer - MRR FS01 Satin Black (10" Front 11" Rear) Winter, pictured-Drag DR 64's Satin Black (9" Front-10" Rear.)  |
|
|
|
|
03-05-2017, 11:38 AM
|
#5 |
Drives: 6th Gen NicKey Camaro & others. Join Date: Nov 2015
Location: Loves Park, Illinois
Posts: 492
|
Kool build, how has the car been running?
|
|
|
|
|
03-05-2017, 04:06 PM
|
#6 | |
|
THE YETI
Drives: 2SS RS Join Date: Jan 2013
Location: chicago
Posts: 411
|
Quote:
__________________
Nickey stage 2 cam, ported heads, fast intake, AMR Headers, no cats, 3inch X pipe,under drive pully,ported throttle body, adm race scoop,AMD cold air, Nickey custom tune,catch can,1le 3:91,BMR trailing arms and outer bushing,toe rods,rear sway bar, tunnel brace,mr228 rims 315 nt05r
|
|
|
|
|
|
03-05-2017, 04:11 PM
|
#7 | |
|
THE YETI
Drives: 2SS RS Join Date: Jan 2013
Location: chicago
Posts: 411
|
Quote:
__________________
Nickey stage 2 cam, ported heads, fast intake, AMR Headers, no cats, 3inch X pipe,under drive pully,ported throttle body, adm race scoop,AMD cold air, Nickey custom tune,catch can,1le 3:91,BMR trailing arms and outer bushing,toe rods,rear sway bar, tunnel brace,mr228 rims 315 nt05r
|
|
|
|
|
|
|
|
|
 |
|
|
