[Anti_venomSS]

Who makes the biggest all motor cam for the LT1? Have been looking at the Track Attack from GPI. Will a stock ported IM/Stock ported TB work with a huge cam?

[ULTRAZLS1]

I’m sure it would. But even average size cams have shown 30rwhp gain with an msd. I woukd assume even more loss with an even bigger cam and more rpm. Search pray on here he did a good comparison a while back. Ported stock vs ported msd. 30 rwhp difference and nothing lost down low with the ported msd

The track attack is probably up there for largest. Pray offers some too. You can have them made any size you want though

[Anti_venomSS]

Wow that is a huge loss from just the intake manifold. Will connect with Pray and see what he thinks.

[ULTRAZLS1]

Yeah

https://www.camaro6.com/forums/showthread.php?t=531989

[MR 45TH]

What's the appeal to find the biggest? Big doesn't always equal more power.

[Anti_venomSS]

Originally Posted by MR 45TH

What's the appeal to find the biggest? Big doesn't always equal more power.

I guess the goal is to run the All Motor Class at the Import vs Domestic meet in November at Maryland International Raceway. Just trying to get the car setup by then. Long ass road ahead.

[Umbriel]

Just a heads up that the Track Attack cam requires fly cutting the pistons. I just contacted Pray and told him I wanted a pretty big cam and he customized one for me with a converter.

[Anti_venomSS]

Originally Posted by Umbriel

Just a heads up that the Track Attack cam requires fly cutting the pistons. I just contacted Pray and told him I wanted a pretty big cam and he customized one for me with a converter.

Nice. So he sells the full cam kit I'm assuming? I'm getting my Circle D 3C put on in 2 weeks by Jannetty Racing. What stall did you go with??

[Umbriel]

Originally Posted by Anti_venomSS

Nice. So he sells the full cam kit I'm assuming? I'm getting my Circle D 3C put on in 2 weeks by Jannetty Racing. What stall did you go with??

Yes he sells everything you need to install it. The converter is a Circle D 4C. Kind of a high stall for street driving but you get used to it.

[Umbriel]

Here is what it sounds like.


https://youtu.be/5I7L7Gl4LuU

[ZapperZ]

Originally Posted by Umbriel

Here is what it sounds like.


https://youtu.be/5I7L7Gl4LuU

Nice

[Anti_venomSS]

Originally Posted by Umbriel

Here is what it sounds like.


https://youtu.be/5I7L7Gl4LuU

Sounds amazing. Would be so intense with my exhaust. All I have is headers, catless pipes and bullett mufflers that exit under the car.

[Anti_venomSS]

Originally Posted by Umbriel

Yes he sells everything you need to install it. The converter is a Circle D 4C. Kind of a high stall for street driving but you get used to it.

I hope the 3600-3800 stall that I have is enough... **** lol

[Umbriel]

Originally Posted by Anti_venomSS

I hope the 3600-3800 stall that I have is enough... **** lol

It probably would be ok, might have a little more bucking at lower rpms but that isn't too far off of my converter.