You are browsing camaro6 
05-24-2022, 09:35 AM
|
#1 |
 
Drives: 2022 Camaro ZL1 Convertible A10 Join Date: Aug 2012
Location: Memphis, TN
Posts: 382
|
Will Escalade-V blower fit on ZL1
The 2023 Cadillac Escalade-V will have
an LT4 engine with a 2.65 liter supercharger 682 hp 653 torque. Does anybody know if the 2.65 liter blower will fit under the hood of 2017 to 2022 ZL1 Camaros ? That would be great 👍 |
|
|
|
05-24-2022, 09:39 AM
|
#2 |
    
Drives: 2019 Chevy Camaro ZL1 M6 Join Date: Jul 2019
Location: Sea level
Posts: 1,252
|
Mechanically it should bolt up fine but I don’t think anyone will know on hood clearance without taking some measurements. I’d bet it will probably fit though.
__________________
Kong Stage X Port, NW103, LPE HPFP, XDI +30 Injectors, ARH Headers, Flex Fuel, JMS Booster, AWE Touring, Elite E2-X CC. Stock heads, stock cam, stock pulleys: Tuned by KingLT1. 740whp Uncorrected on e50
|
|
|
|
|
05-24-2022, 11:14 AM
|
#3 |
 Drives: 24 Sliverado 1500 ZR2, 2017 ZL1 Join Date: Feb 2021
Location: KY
Posts: 53
|
Until somebody actually can post measurements I don't think anyone can be certain.
Remember the ZL1 & Z06 blowers are not a direct swap
__________________
Finally on the way to 1K.....
|
|
|
|
|
05-24-2022, 11:22 AM
|
#4 |
     Drives: 2021 Red Hot ZL1 Join Date: Sep 2020
Location: Gapplebees
Posts: 3,092
|
No one will know for certain until they are released and the parts are available. I'd be willing to be one of the tuner shops will certainly try it and we'll all know then. i can't think of any valid reason to do this though unless the Caddy blower is significantly cheaper than a Maggie 2650R.
|
|
|
|
05-24-2022, 11:22 AM
|
#5 |
|
Drives: 2018 Camaro ZL1 Join Date: Aug 2018
Location: Georgia
Posts: 1,370
|
Seeing as this overpriced vehicle hasn't even been released, how would anyone know?
I bet GM doesn't even know. |
|
|
|
|
05-24-2022, 11:39 AM
|
#6 |
Drives: 2008 Pontiac G8 GT, Shelby GT500 Join Date: Mar 2011
Location: Long Island, New York
Posts: 1,376
|
This is how the LT4 should of came from the beginning.
|
|
|
|
|
05-24-2022, 11:45 AM
|
#7 |
|
Drives: ZL1/1LE parts added Join Date: May 2018
Location: Somewhere around Texas pines tress and smooth asphalt
Posts: 609
|
Just like the Z06 C8 prices were supposed to be out over a month ago, nothing yet due to parts I guess, And seeing what people will pay, 180K for a SUV ?
|
|
|
|
|
05-24-2022, 12:17 PM
|
#8 |
|
Petro-sexual
|
I bet it won't fit. It looks so close (admittedly - from press pics) in height (proportionally) to LT5 that it won't matter too much. Besides - it doesn't have port and I don't think our ECMs will control the by-pass, if I understand the by-pass correctly.
__________________
 '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
|
|
|
|
05-25-2022, 08:34 AM
|
#9 | |
 
Drives: ZL1 Join Date: Oct 2021
Location: Houston
Posts: 139
|
Quote:
|
|
|
|
|
|
05-25-2022, 09:44 AM
|
#10 |
|
Drives: 2017 ZL1 Vert M6 Join Date: Feb 2019
Location: Portland, OR
Posts: 477
|
Good luck “bolting this on” and expecting it to work.
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
