Service Stabilitrak & Service Power Steering - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Silver_Flake · 03-25-2014, 04:34 PM

Okay fellas, I need your expertise! Last week I installed my Kooks LTH and mid-pipes. I had a buddy help me because I knew id need an extra pair of hands. Well, long story short, when I was unbolting the steering shaft to make room for the headers to fit, my friend decided it was a good idea to let go of the steering wheel

I know it spun a couple times. Well, after start-up, I get a "Service Stabilitrak" whenever I move my steering wheel at all. ALSO, I get a "Service Power Steering" When I turn my steering wheel too far to the right.

So, my question is, what parts will I need to fix this? After searching some threads, I have kind of narrowed it down to a steering angle sensor and/or a clock spring. I noticed a lot of people replaced the sensor for their "Service Stabilitrak" problem, but I haven't seen anyone with a "Service Power Steering" problem which makes me think I may need to replace my clock spring as well

Will I need both parts to fix this problem? Help me out guys. I appreciate it. Thank you!

Silver_Flake · 03-28-2014, 12:55 AM

Bump

332 · 03-28-2014, 04:52 AM

I believe that the steering angle sensor is of...and it needs recalibration,the dealer will help you here...

serows1 · 03-28-2014, 06:33 AM

First, get a new friend...

Second, sounds like you spun the SIR coil behind the steering wheel, you'll need to replace it.

Good Luck,
Paul

Silver_Flake · 04-05-2014, 11:01 AM

Thought I would bump this one more time before I take it to the dealership.

Do you think I just need them to center/recalibrate the wheel with the angle sensor?

dkbmx993 · 10-14-2014, 05:42 AM

Quote:

Originally Posted by Silver_Flake

Thought I would bump this one more time before I take it to the dealership.

Do you think I just need them to center/recalibrate the wheel with the angle sensor?

How did you fix this? I have the same problem

Hellfighter · 04-12-2020, 04:32 PM

What was the fix for this? Lost power steering and every light possible was on, including brake light while i was driving through neighborhood..

03-25-2014, 04:34 PM	#1
Silver_Flake Drives: 2013 IOM SS Join Date: Dec 2013 Location: Toledo, OH Posts: 14	Service Stabilitrak & Service Power Steering Okay fellas, I need your expertise! Last week I installed my Kooks LTH and mid-pipes. I had a buddy help me because I knew id need an extra pair of hands. Well, long story short, when I was unbolting the steering shaft to make room for the headers to fit, my friend decided it was a good idea to let go of the steering wheel I know it spun a couple times. Well, after start-up, I get a "Service Stabilitrak" whenever I move my steering wheel at all. ALSO, I get a "Service Power Steering" When I turn my steering wheel too far to the right. So, my question is, what parts will I need to fix this? After searching some threads, I have kind of narrowed it down to a steering angle sensor and/or a clock spring. I noticed a lot of people replaced the sensor for their "Service Stabilitrak" problem, but I haven't seen anyone with a "Service Power Steering" problem which makes me think I may need to replace my clock spring as well Will I need both parts to fix this problem? Help me out guys. I appreciate it. Thank you!

04-12-2020, 04:32 PM	#7
Hellfighter Drives: 2013 Black ZL1 Join Date: Mar 2011 Location: Sugar Land/Texas Posts: 2,354 View My Garage	What was the fix for this? Lost power steering and every light possible was on, including brake light while i was driving through neighborhood.. __________________

03-28-2014, 12:55 AM	#2
Silver_Flake Drives: 2013 IOM SS Join Date: Dec 2013 Location: Toledo, OH Posts: 14	Bump

03-28-2014, 04:52 AM	#3
332 Drives: 2SS Join Date: Sep 2012 Location: middle of nowhere Posts: 136	I believe that the steering angle sensor is of...and it needs recalibration,the dealer will help you here...

03-28-2014, 06:33 AM	#4
serows1 Drives: Blue Ray 2SS Join Date: Jul 2013 Location: Elyria Posts: 262	First, get a new friend... Second, sounds like you spun the SIR coil behind the steering wheel, you'll need to replace it. Good Luck, Paul

04-05-2014, 11:01 AM	#5
Silver_Flake Drives: 2013 IOM SS Join Date: Dec 2013 Location: Toledo, OH Posts: 14	Thought I would bump this one more time before I take it to the dealership. Do you think I just need them to center/recalibrate the wheel with the angle sensor?