03-03-2017, 12:23 PM | #1 | |
Drives: Camaro Lighting Experts Join Date: Feb 2012
Location: St. Louis, MO
Posts: 2,429
|
Diode Dynamics' 2017 SEMA Booth Build: 2SS Camaro!
We flew down to Bossier City, Louisiana to pick up our new Camaro 2SS from John McKee of: McKee Cars Nightfall Gray, black leather, 6-speed manual equipped car. We have big plans for it, and have already started developing new lighting products for the 6th Gen Camaro. This Camaro will be in our booth at the 2017 SEMA Show: SEMA 2017 Booth Information: North Hall-Mobile Electronics Booth #11961 ---------------------------------------------------------------------------------------------- After the drive back to Saint Louis, we took it to Habibi Motorsports to check the alignment: Then we took it to our friends at AutoStyles to get the windows tinted and our Diode Dynamics' name banner on the windshield: Everything looks better once tinted, we went 20% all around, and 35% on the windshield (because show car): We are diggin' the Nightfall Grey, but the color will change this Spring once we take it to our friends at Vinyl Images & Design LLC for a full-vehicle wrap with Avery Dennison Vinyl Material. Here's a shot of it with our new LED Sidemarkers installed: Diode Dynamics LED Sidemarkers for 2016+ Chevrolet Camaro (set) Here's a current breakdown of the parts/services we have installed on our Camaro, with our industry partners listed: Performance Upgrades Magnaflow Cat-back Competition Exhaust - Quad Tip PART # 19265 3" Polished *Installation services provided by Craven Performance SCT Performance Livewire TS+ Tuner Texas Speed & Performance LT1 VVT-3 Camshaft w/Factory Fuel Lobe: 235/239, .645"/.635", 116 LSA, 112 ICL 7.85" Pushrod, 3/8" Diameter with 5/16" Ball ends (per pushrod) .660" Dual Valve Spring Kit feat. PAC Valve Springs & PRC Integrated Seat/Seal PRC Titanium Retainers for PRC Dual Spring setup (seats & seats as well) PAC Racing Polished valve springs, 1.900" Height, .710" Max Lift 0 Degree Phaser Limiter TSP DOD Delete Kit / Headbolts / LS2 Lifter Tray Hy-Lift Johnson OE LS7 Style Lifters / Gaskets Texas Speed & Performance 1-7/8" Stainless Steel Long Tube Headers & 3" Stainless Steel Catted X-Pipe ('tis going to be quite loud) *Installation services provided by Craven Performance SLP Performance Blackwing Cold Air Intake Wheels & Tires HRE Flow Form FF04 wheels Liquid Black Finish 20x10 ET23 fronts & 20x11 ET43 rears Michelin Pilot Sport 4S 2x 305/30ZR20 Rear 2x 285/30ZR20 Front Suspension & Handling Upgrades KW V3 Coilover Kit *Without Magnetic Dampners Exterior Upgrades Auto Styles 20% Window Tint Third Brake Light Tint - (Replaced w/ZL1 1LE unit) Avery Dennison Gloss Black Metallic Vinyl *Laminated with a satin finish, installed by Vinyl Images Black Chevrolet Bowties Custom painted by Elite Customs & Collision Supplied by ThatCamaroPartsGuy.com St. Louis Auto Detail Full Ceramic Coating Services (Complete Exterior Coating, glass, wheels, brake calipers, exhaust tips) CeramicPro Lighting Upgrades Diode Dynamics Smoked LED Sidemarkers (set) XP80 LED Reverse Lights XP80 LED Turn Signals HP5 Cool White LED Trunk Light Replacement HP5 Cool White LED License Plate Light Replacement Headlights RGBWA LED Board Replacements (Upper & Lower DRL) *COMING SOON* Pro-Series RGBW Universal Multi-color Demon Eyes *Installation Services courtesy of RetroShop ZL1 1LE Dark Third Brake Lamp Chevrolet Performance Alternative Finish Tail Lamps *Courtesy of Phastek Performance As it sits now (KW V3 Coilovers to the rescue!!) Last Update 9/22/2017
__________________
Last edited by Diode Dynamics; 10-03-2017 at 01:16 PM. |
|
03-03-2017, 12:26 PM | #2 |
Drives: Camaro Lighting Experts Join Date: Feb 2012
Location: St. Louis, MO
Posts: 2,429
|
We took it to it's first Cars & Coffee just two days after picking it up:
We are grateful to have such an organized Cars & Coffee group here in St. Louis: Cars & Coffee St. Louis Website
__________________
Last edited by Diode Dynamics; 09-14-2017 at 01:49 PM. |
03-06-2017, 09:11 AM | #3 |
OMWTFYB
Drives: ZL1 Join Date: Sep 2011
Location: Phoenix
Posts: 1,523
|
Subscribed
|
03-06-2017, 11:23 AM | #4 |
Drives: Camaro Lighting Experts Join Date: Feb 2012
Location: St. Louis, MO
Posts: 2,429
|
Our friends at SCT Performance have provided us with a LiveWireTS for our build: SCT Website Always a great performance mod to start with! We will run a basic 93 tune until more of our performance adders come in. Then we will have it custom tuned. Nick C.
__________________
|
03-06-2017, 12:09 PM | #5 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,817
|
nice and congrats! i think i need some of your goodies on my car soon!
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
03-06-2017, 12:22 PM | #6 |
Drives: Camaro Lighting Experts Join Date: Feb 2012
Location: St. Louis, MO
Posts: 2,429
|
We have a lot of cool stuff coming soon! I will be keeping this thread updated with our new products and new products sent by our build partners
Auto Styles 20% Window Tint Third Brake Light Tint Thanks! 3/6/2017 Nick C.
__________________
Last edited by Diode Dynamics; 09-14-2017 at 01:12 PM. |
03-07-2017, 02:38 PM | #7 |
Drives: Camaro Lighting Experts Join Date: Feb 2012
Location: St. Louis, MO
Posts: 2,429
|
Our SCT LiveWireTS came in today, so we updated it and added a modified 93 tune on our car. I'm amazed by the difference even with just a base tune. We will have it custom tuned once we install more power adders. I highly recommend adding this tuner for your first performance mod. Nick C.
__________________
Last edited by Diode Dynamics; 10-03-2017 at 01:17 PM. |
03-09-2017, 04:32 PM | #8 |
Drives: Camaro Lighting Experts Join Date: Feb 2012
Location: St. Louis, MO
Posts: 2,429
|
Another Cars & Coffee St. Louis event in the books:
Surrounded by Mopars, Maseratis, and all kinds of fun stuff Nick C.
__________________
Last edited by Diode Dynamics; 10-03-2017 at 01:17 PM. |
03-10-2017, 03:53 PM | #9 | ||
Drives: Camaro Lighting Experts Join Date: Feb 2012
Location: St. Louis, MO
Posts: 2,429
|
HP5 Cool White Installed We upgraded our license plate lights with our 194 HP5 6000K replacements. Super easy on the Camaro, and it really cleans up the rear end. Also added some more usable output to the trunk by replacing the incandescent bulbs with our LED replacements: Nick C.
__________________
Last edited by Diode Dynamics; 09-14-2017 at 01:49 PM. |
||
03-16-2017, 11:11 AM | #10 |
Drives: Challenger SP Shaker/Arcadia Denali Join Date: Jan 2016
Location: New York City
Posts: 1,928
|
Are you guys going to be showing off the Tinted LED Side Markers soon? You know a load of us are still checking that thread daily! hehehe
|
03-16-2017, 11:14 AM | #11 | |
Drives: Camaro Lighting Experts Join Date: Feb 2012
Location: St. Louis, MO
Posts: 2,429
|
Quote:
They are so reflective, it's a major improvement over the OEM units just from a reflective and safety standpoint alone. Very excited to post pics when they are available! Nick C.
__________________
|
|
03-16-2017, 12:47 PM | #12 | |
Drives: 2010 Camaro 454 LSX (SOLD) Join Date: Jun 2013
Location: Dearborn Heights, MI
Posts: 792
|
Quote:
The correct package CAI,CNC head, am and header/conection combo will be up 80-100 Wheel! |
|
03-16-2017, 12:49 PM | #13 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,817
|
nice looking good so far guys!
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
03-23-2017, 02:41 PM | #14 |
Drives: Camaro Lighting Experts Join Date: Feb 2012
Location: St. Louis, MO
Posts: 2,429
|
Here's the first look at our clear lens option installed on our SEMA build: Perfect OEM quality fitment and finish. The retro-reflector design exceeds the OEM reflectivity for added safety. Our production team is doing their best here, but we are still a few weeks away from releasing them. We are completing all final testing procedures and building up initial stock before launch. We will continue to keep everyone updated, as we are excited to release this product! I will post pictures with the smoked lens as soon as we have them. That's the color we will be displaying on our build. Thank you, Nick C.
__________________
Last edited by Diode Dynamics; 09-14-2017 at 01:47 PM. |
|
|
Post Reply
|
|
|