Iggee simulated leather seat covers. - Page 23 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Fresh · 02-10-2014, 06:44 PM

How long did it take to install?

coryrulez9 · 02-10-2014, 07:08 PM

Kleeeb, Can you take a picture from the trunk of what these look like? Just wondering if you see nothing but bungies from the trunk....would get in the way when loading stuff with the seat down.

coryrulez9 · 02-13-2014, 09:29 PM

I got my color samples today. The blue is a really nice blue. Its darker than I expected but not super dark...think it will complement the exterior well if I can find some fabric of it to wrap the door panels in

Kleeeb · 02-13-2014, 11:10 PM

Quote:

Originally Posted by coryrulez9

I got my color samples today. The blue is a really nice blue. Its darker than I expected but not super dark...think it will complement the exterior well if I can find some fabric of it to wrap the door panels in

Sorry I just saw this post. I don't have the back seats installed, nor do in have the seat covers installed completely proper either. There are elastic cords that you are supposed to attach under the seat, but I didn't take my seats out to do it and the electric components under the seat make this very hard, so I kind if just tucked them in and hoped for the best. And I was told it's better to let them stretch out first and then strap the cords? I'm not sure. Either way, the seat covers feel great. The stitching and seams are a little subpar but not in a "oh my gosh this is terrible" sort of way. It's just the foam backing folds and makes weird creases or pops the bottom seat cover up, which I hope will get better with time. ALL IN ALL, they look amazing. I've gotten several complements on them and they feel like leather, to an extent. Even without being properly strapped down (there is Velcro to hold the bottom and top seat together) they don't slide around or come loose and they are quite comfy. I felt almost as if It had a different ride when I drove it the first time after install. The seats felt softer and more plush, and therefore I guess made the ride "smoother"... May just be my imagination though. I say go for the covers and let us know how how they turn out!

Sent from my iPhone using Tapatalk

JamesF · 04-09-2014, 12:28 AM

Old, but good thread. I am looking into ordering the red/black for a convertible. I'm definitely NOT feeling the headrest.. looks like some robot/cyclops eye dot thing going on. I like the look of the SS with the entire front being red, then back being black.

Emailed them about possibly doing it with an extra charge.. I mean it's literally just two pieces they have to swap to red instead.

i007spectre · 04-09-2014, 10:39 AM

My drivers side is starting to get in bad condition along the edges and seams. But seeing as I started this tread and have used them for about four years, they have still been worth it. The passenger side is still perfect though, but I rarely have passengers. Guess I could switch them, that way the drivers doesn't get more worn. Should have done that long ago.

Kleeeb · 04-09-2014, 05:03 PM

Quote:

Originally Posted by i007spectre

My drivers side is starting to get in bad condition along the edges and seams. But seeing as I started this tread and have used them for about four years, they have still been worth it. The passenger side is still perfect though, but I rarely have passengers. Guess I could switch them, that way the drivers doesn't get more worn. Should have done that long ago.

Don't do that. Then the air bag flaps won't be functional, and you will have a problem there. Never compromise safety!

Sent from my iPhone using Tapatalk

JamesF · 04-10-2014, 12:03 AM

Quote:

Originally Posted by i007spectre

My drivers side is starting to get in bad condition along the edges and seams. But seeing as I started this tread and have used them for about four years, they have still been worth it. The passenger side is still perfect though, but I rarely have passengers. Guess I could switch them, that way the drivers doesn't get more worn. Should have done that long ago.

Err.... yeah; every factory seats I've had start showing wear and tears after awhile too.

-------

They wouldn't bite on giving me a custom headrest; I may just order the seats in ALL RED!

i007spectre · 04-10-2014, 07:28 PM

Quote:

Originally Posted by Kleeeb

Don't do that. Then the air bag flaps won't be functional, and you will have a problem there. Never compromise safety!

Sent from my iPhone using Tapatalk

I didn't think there were airbags in the seats of our cars. I know the back parts had them.

Kleeeb · 04-10-2014, 07:31 PM

Quote:

Originally Posted by i007spectre

I didn't think there were airbags in the seats of our cars. I know the back parts had them.

No we definitely have side air bags in out seats.

That's what that side Velcro is for!

Sent from my iPhone using Tapatalk

i007spectre · 04-11-2014, 02:27 PM

Yeah that's what I meant by the back part of them. I am talking about the actual seat part that your bottom touches, not your back. Is there any reason why you cant swap them?

TwentyTen2SSRS · 04-11-2014, 03:18 PM

where is everyoen ordering from? Direct? Or on ebay link?

mydreamcar · 04-11-2014, 03:31 PM

Either or. Prices are the same

TwentyTen2SSRS · 04-17-2014, 06:08 PM

Quote:

Originally Posted by JamesF

Old, but good thread. I am looking into ordering the red/black for a convertible. I'm definitely NOT feeling the headrest.. looks like some robot/cyclops eye dot thing going on. I like the look of the SS with the entire front being red, then back being black.

Emailed them about possibly doing it with an extra charge.. I mean it's literally just two pieces they have to swap to red instead.

Any update on this? DId they agree? What email address did you send to?

04-09-2014, 10:39 AM	#314
i007spectre Drives: 2016 2SS, 2008 HHR ECTO-2H Join Date: Aug 2009 Location: Springfield, Mo Posts: 1,927 View My Garage	My drivers side is starting to get in bad condition along the edges and seams. But seeing as I started this tread and have used them for about four years, they have still been worth it. The passenger side is still perfect though, but I rarely have passengers. Guess I could switch them, that way the drivers doesn't get more worn. Should have done that long ago. __________________ 2016 Camaro 2SS. Hyper Blue, Ceramic White, Auto, MRC, and NPP. 1100 - 9/25 2000 - 9/28 3000 - 9/30 3100 - 10/27 3300 - 10/28 3400 - 10/29 TPW 11/09 3800 - 11/10 4300 - 11/24 4B00 - 11/25 4200 - 12/5 5000 - 12/7 6000 - 12/11

04-11-2014, 02:27 PM	#319
i007spectre Drives: 2016 2SS, 2008 HHR ECTO-2H Join Date: Aug 2009 Location: Springfield, Mo Posts: 1,927 View My Garage	Yeah that's what I meant by the back part of them. I am talking about the actual seat part that your bottom touches, not your back. Is there any reason why you cant swap them? __________________ 2016 Camaro 2SS. Hyper Blue, Ceramic White, Auto, MRC, and NPP. 1100 - 9/25 2000 - 9/28 3000 - 9/30 3100 - 10/27 3300 - 10/28 3400 - 10/29 TPW 11/09 3800 - 11/10 4300 - 11/24 4B00 - 11/25 4200 - 12/5 5000 - 12/7 6000 - 12/11

04-11-2014, 03:18 PM	#320
TwentyTen2SSRS Drives: 2010 2SS/RS Join Date: Apr 2013 Location: Seattle, WA Posts: 3,972 View My Garage	where is everyoen ordering from? Direct? Or on ebay link? __________________ Cold Air Inductions CAI • Stainless Power LT's with HFC's • Flowmaster American Thunder Cat Back • APEX Scoop and WW Relocation Kit • VMAX Ported Throttle Body • Custom Dyno Tune • Pfadt 1.25" Lowering Springs • ZL1 Rims on 275 front 315 Rear • custome underlay vinyl wrap • Anvil Spoiler • heritage grill • APR Front Splitter • Custom Emblempros emblems • ZL1 Side Skirts • 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)

04-11-2014, 03:31 PM	#321
mydreamcar My Dream Car Drives: 2011 SIM LS3 1SS Join Date: Jul 2009 Location: staten island Posts: 1,534	Either or. Prices are the same __________________ CAI intake/ADM Scoop/Stainless Power Headers/Dynatech cat back exhaust/Vitesse Throttle Control/ Ported Throttle Body/QTP Electric Cutouts/ 3.91 gears and janetty rear posi/ Tuned by Janetty racing

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Update on SS Factory Cloth Seat Covers W/ Pics F/S	trimman	Interior Parts & Accessories	3	01-09-2011 06:55 PM
WTB: Grey leather seat covers	superman	Interior Parts & Accessories	0	09-05-2010 04:36 PM
Genuine Leather seat covers	derin11	Cosmetics and Lighting Modification Discussions	16	09-04-2009 05:17 AM
Leather seat cover groupbuy	t3chfr3ak	Cosmetics and Lighting Modification Discussions	35	04-08-2009 08:26 PM

02-10-2014, 06:44 PM	#309
Fresh Drives: 2011 Victory Red Join Date: Jun 2013 Location: VA Posts: 58	How long did it take to install?

02-10-2014, 07:08 PM	#310
coryrulez9 Drives: 2014 Camaro 2LS Blue Ray Join Date: Jan 2010 Location: Columbus Posts: 204	Kleeeb, Can you take a picture from the trunk of what these look like? Just wondering if you see nothing but bungies from the trunk....would get in the way when loading stuff with the seat down.

02-13-2014, 09:29 PM	#311
coryrulez9 Drives: 2014 Camaro 2LS Blue Ray Join Date: Jan 2010 Location: Columbus Posts: 204	I got my color samples today. The blue is a really nice blue. Its darker than I expected but not super dark...think it will complement the exterior well if I can find some fabric of it to wrap the door panels in

04-09-2014, 12:28 AM	#313
JamesF Drives: 2012 Camaro Convertible 1LT RS Join Date: Apr 2014 Location: Nashville Posts: 11	Old, but good thread. I am looking into ordering the red/black for a convertible. I'm definitely NOT feeling the headrest.. looks like some robot/cyclops eye dot thing going on. I like the look of the SS with the entire front being red, then back being black. Emailed them about possibly doing it with an extra charge.. I mean it's literally just two pieces they have to swap to red instead.