08-22-2018, 08:31 AM | #1 |
Drives: '18 RH ZL1 1LE Join Date: Apr 2018
Location: On The Edge
Posts: 323
|
Will this blower fit?
Who can recommend a tuner?
|
08-22-2018, 06:54 PM | #2 |
Drives: Hyper Blue 2016 2SS 6M Join Date: Sep 2017
Location: North Ga
Posts: 1,788
|
What the hell does that thing go on? Ship engine maybe? i wonder how fast it spins? Certainly not 19k rpm lol!
__________________
Baby Blue
2016 Hyper Blue 2SS/6m/MRC/NPP/Silver Rally stripes/ZL1 wheels & brakes/GForce DS and axles/ZLE Cradle Bushings/FE4 ARB front & rear/SEMA Grill/Rotofab dry/95mm TB/Magnuson 2300/Full LT4 fuel system/JMS boost-a-pump/E85 Sensor/Ported CID heads from LME/Cammotion PD cam/Thompson Motorsports forged shortblock/catted Kooks 1 7/8 headers /JRE remote tuned |
08-22-2018, 06:59 PM | #3 |
Drives: 18 2SS 1LE Join Date: Jul 2018
Location: OK
Posts: 112
|
|
08-22-2018, 09:52 PM | #4 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Two bad ass drills.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
08-23-2018, 12:00 AM | #5 |
Drives: 2002 Camaro SS Join Date: Jun 2012
Location: Evansville, Indiana
Posts: 526
|
I think if I just shaved the wiper blades and trimmed the cowl...
__________________
2017 1SS Hyper Blue M6
2001 Ford Lightning |
08-23-2018, 12:48 AM | #6 |
Drives: Grandad's C2 L89 Join Date: May 2017
Location: 20*51.50N 156*29.60W
Posts: 1,711
|
Yes.
Required tools; 18 lb.sledge hammer, sawzall, caffeine and duct tape. Funny post full*throttle*therapy.
__________________
2018 ZL1 1LE sw/PDR
|
08-23-2018, 10:00 AM | #7 |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,324
|
This will require a slight hood bulge IMO.
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
08-23-2018, 06:18 PM | #8 |
Drives: 2017 1SS 1LE Join Date: Aug 2017
Location: New Jersey
Posts: 391
|
That’s the new TVS26500000000000000
__________________
www.facebook.com/1lap1le
2017 1SS 1LE - 663 whp/623 wtq Rotofab/Whipple/Kooks 2"/LT5 TB/LT4 Fueling/E85/MCS Coilovers/Ground Control/GOODAero/Apex Wheels/Race Louvers |
08-23-2018, 08:06 PM | #9 |
Drives: Hyper Blue 2016 2SS 6M Join Date: Sep 2017
Location: North Ga
Posts: 1,788
|
Could it be for a giant two stroke diesel?
__________________
Baby Blue
2016 Hyper Blue 2SS/6m/MRC/NPP/Silver Rally stripes/ZL1 wheels & brakes/GForce DS and axles/ZLE Cradle Bushings/FE4 ARB front & rear/SEMA Grill/Rotofab dry/95mm TB/Magnuson 2300/Full LT4 fuel system/JMS boost-a-pump/E85 Sensor/Ported CID heads from LME/Cammotion PD cam/Thompson Motorsports forged shortblock/catted Kooks 1 7/8 headers /JRE remote tuned |
08-24-2018, 07:04 AM | #10 |
Drives: 2016 ss whipple,rotofab,A8,magride Join Date: Sep 2017
Location: Destin, Florida
Posts: 128
|
Biggest corkscrews i have ever seen!
|
08-24-2018, 07:12 AM | #11 |
Drives: 2002 Camaro SS Join Date: Jun 2012
Location: Evansville, Indiana
Posts: 526
|
That's nice and all, but after I buy headers for it, I could've just gone turbos instead
__________________
2017 1SS Hyper Blue M6
2001 Ford Lightning |
|
|
Post Reply
|
|
|