04-20-2017, 03:59 PM | #43 |
Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012
Location: Vance Alabama
Posts: 8,019
|
What rpm?
It is more crisp fo sho! |
04-21-2017, 08:55 AM | #44 |
Humble
|
She's sitting right around 940-960 after she's leveled out.
__________________
10' Camaro SS M6 496 whp/466 tq
MGW Shifter, Afe Power Cai, Speed Engineering catch can, Tsp Cam, new rockers, push rods, lifters, springs, stock ls3 heads Xs power exhaust & Headers, lowered 2 inches all the way around |
04-21-2017, 01:57 PM | #45 |
Drives: 2013 2ss hotwheels Join Date: Aug 2014
Location: iowa
Posts: 270
|
who did your install and tune? im a little north of you
|
04-21-2017, 02:06 PM | #46 | |
|
Quote:
__________________
Car mods: never enough!
|
|
04-21-2017, 02:37 PM | #47 |
Humble
|
I did my own install and a buddy of mine helped me with the new oil pump and torquing the heads to spec and cleaning the deck of the block and other little stuff, pretty easy once you do a feel times lol.
Performance by Joe is my tuner he is probably is not one of the best tuners in St.Louis he will not touch a mustang and he only works on GM and Mopar lol.
__________________
10' Camaro SS M6 496 whp/466 tq
MGW Shifter, Afe Power Cai, Speed Engineering catch can, Tsp Cam, new rockers, push rods, lifters, springs, stock ls3 heads Xs power exhaust & Headers, lowered 2 inches all the way around |
04-21-2017, 02:39 PM | #48 |
Humble
|
Thank you very much. I'm more proud cause I did it myself and didn't have to pay a shop the only think I didn't do was clean the heads I had those hot tanked and the new springs and the trunnion upgrade pressed.
So just a little achievement to myself.
__________________
10' Camaro SS M6 496 whp/466 tq
MGW Shifter, Afe Power Cai, Speed Engineering catch can, Tsp Cam, new rockers, push rods, lifters, springs, stock ls3 heads Xs power exhaust & Headers, lowered 2 inches all the way around |
04-21-2017, 02:47 PM | #49 |
|
Nice! Nothing better than doing it yourself and the satisfaction when completed. Planning to do mine myself also. Was going to do it before summer but going to hold off till late fall so I can have more money set aside for top notch parts when I do the cam and heads. Going to just enjoy what I got now and put some miles on her this year. Last year I didn't even put 1000 miles on the car.. lol.
__________________
Car mods: never enough!
|
04-21-2017, 11:14 PM | #50 | |
Humble
|
Quote:
__________________
10' Camaro SS M6 496 whp/466 tq
MGW Shifter, Afe Power Cai, Speed Engineering catch can, Tsp Cam, new rockers, push rods, lifters, springs, stock ls3 heads Xs power exhaust & Headers, lowered 2 inches all the way around |
|
04-22-2017, 12:21 AM | #51 |
Drives: 2013 2ss hotwheels Join Date: Aug 2014
Location: iowa
Posts: 270
|
are those ts pushrods and springs?,if so which ones.
|
04-22-2017, 10:21 AM | #52 |
Drives: 2013 2ss hotwheels Join Date: Aug 2014
Location: iowa
Posts: 270
|
I assume 7.2 length but i see a .105 , a 3/8 ,and a 5/16?
|
04-24-2017, 08:12 AM | #53 |
Humble
|
Push Rods 7.40:
https://www.texas-speed.com/p-633-te...ds-single.aspx Springs: https://www.texas-speed.com/p-5704-t...retainers.aspx
__________________
10' Camaro SS M6 496 whp/466 tq
MGW Shifter, Afe Power Cai, Speed Engineering catch can, Tsp Cam, new rockers, push rods, lifters, springs, stock ls3 heads Xs power exhaust & Headers, lowered 2 inches all the way around |
04-24-2017, 10:23 PM | #54 |
I was going to ask if you knew the piston to valve clearances? its got to be getting close.
|
|
06-30-2017, 01:39 PM | #55 |
Drives: 2013 Camaro SS Join Date: Apr 2017
Location: South Florida
Posts: 254
|
Now that you have had it for a few months how do you feel about that cam?
|
08-03-2017, 01:54 AM | #56 |
Humble
|
The Cam is awesome, I need to get retuned, I’ve had some people here in St. Louis with a similar setup and they’re pushing 500+ tested on 3 different dyno, I didn’t know it wa capable of that with Cam, Exhaust, Intake and a tune
__________________
10' Camaro SS M6 496 whp/466 tq
MGW Shifter, Afe Power Cai, Speed Engineering catch can, Tsp Cam, new rockers, push rods, lifters, springs, stock ls3 heads Xs power exhaust & Headers, lowered 2 inches all the way around |
|
|
Tags |
cam |
|
|