2016 V6 Automatic with NPP - Dyno Results

meissen · 09-26-2016, 07:24 AM

Tried searching but it looks like Phastek is the only other thread with a dyno result. I organized a dyno day this past weekend and we had a wide assortment of cars on the dyno. I threw my 2016 v6 on the dyno and was pretty happy with the results.

277rwhp! Not too shabby considering it's going through an 8 speed automatic.

Will update with graph later. I don't remember torque, but I was pretty surprised to see the 2016 v6 automatic dyno'd exactly the same rwhp as my previously owned 2014 v6 6-speed manual. So the difference in RWHP from 2014 to 2016 is about equivalent to the horsepower loss you'd typically see between automatic to manual transmissions.

Name: 14409488_10101844319600916_1183246422661184314_o.jpg
Views: 2926
Size: 158.5 KB

Name: 14409488_10101844319600916_1183246422661184314_o.jpg
Views: 2926
Size: 158.5 KB

Name: 20160924_140041.jpg
Views: 2871
Size: 160.6 KB

Name: 20160924_135903.jpg
Views: 2933
Size: 175.2 KB

MiamiBlueCamaro · 09-26-2016, 07:32 AM

This looks legit.

meissen · 09-26-2016, 07:45 AM

Figured the post was kinda useless without the graph so I ran out to my car to take a photo.

Name: 20160926_083758.jpg
Views: 2873
Size: 184.7 KB

PolynesianPowerhouse · 09-26-2016, 07:51 AM

Good stuff. I remember phastek was having problems topping out or something so they only netted about 240ish. They figured it was about 25-35 lower than what it should be. Good to see someone got it done.

meissen · 09-26-2016, 07:52 AM

The person running the dyno was well familiar with my 2012 and 2014 Camaros that were both v6 6-speeds and had to be ran in 3rd gear to avoid topping out on MPH.

If my memory serves correctly, he said he kept it in 5th gear for the runs so he would avoid hitting the speed limiter.

Weedo · 09-26-2016, 09:27 AM

I think i confused myself... The 277hp is for your 2016? Or 2014?

meissen · 09-26-2016, 09:33 AM

This is on a 2016 Camaro v6 8speed automatic with NPP. It made the exact same rwhp numbers as my v6 6-speed manual 5th gens.

Edit: I have to update my signature - I traded my 2014 Camaro in for a 2016 back in June

Edit Edit: I just realized the OP said "2014" where it should have said 2016. Sorry for the confusion.

Weedo · 09-26-2016, 09:42 AM

Quote:

Originally Posted by meissen

This is on a 2016 Camaro v6 8speed automatic with NPP. It made the exact same rwhp numbers as my v6 6-speed manual 5th gens.

I have to update my signature - I traded my 2014 Camaro in for a 2016 back in June,

Interesting! Ok, so a bit low then based on the 335hp (vs the older Gen with less power). I suppose the 0-60 (5.1) and quarter mile significant drops are more because of the lower weight (200-250lbs?) and "better" gearing, than the horse power and torque increases.

Enriquez · 12-01-2021, 02:59 PM

This is what I got on my Camaro 2018 V6 with realdash Name: IMG_20211201_015327439_HDR.jpg
Views: 931
Size: 71.8 KB

Name: IMG_20211201_015341613_HDR.jpg
Views: 936
Size: 68.5 KB

Name: IMG_20211201_015356830_HDR.jpg
Views: 1010
Size: 75.4 KB

versionx · 12-01-2021, 05:42 PM

What is the numbers before the tune?

09-26-2016, 07:24 AM	#1
meissen Founder - Michigan FBody Drives: 1994 Camaro LT1, 2012 Camaro 2SS/RS Join Date: Jun 2008 Location: New Haven, MI Posts: 2,599	2016 V6 Automatic with NPP - Dyno Results Tried searching but it looks like Phastek is the only other thread with a dyno result. I organized a dyno day this past weekend and we had a wide assortment of cars on the dyno. I threw my 2016 v6 on the dyno and was pretty happy with the results. 277rwhp! Not too shabby considering it's going through an 8 speed automatic. Will update with graph later. I don't remember torque, but I was pretty surprised to see the 2016 v6 automatic dyno'd exactly the same rwhp as my previously owned 2014 v6 6-speed manual. So the difference in RWHP from 2014 to 2016 is about equivalent to the horsepower loss you'd typically see between automatic to manual transmissions. __________________ 2012 Camaro 2SS/RS L99 - *"Zooma"* 1994 Camaro LT1 A4 - *"Red Alert"* - v6-to-LT1 Swapped Cruiser; Cammed, Stalled, Enjoyed "Gone But Not Forgotten" 2016 Camaro 1LT A8 - "Elmo" 2014 Camaro 1LT M6 - "Cherry Bomb" 2012 Camaro 1LS M6 - "Clifford" Michigan FBody Association http://www.mifbody.com/ Last edited by meissen; 09-26-2016 at 09:39 AM.

09-26-2016, 07:45 AM	#3
meissen Founder - Michigan FBody Drives: 1994 Camaro LT1, 2012 Camaro 2SS/RS Join Date: Jun 2008 Location: New Haven, MI Posts: 2,599	Figured the post was kinda useless without the graph so I ran out to my car to take a photo. __________________ 2012 Camaro 2SS/RS L99 - *"Zooma"* 1994 Camaro LT1 A4 - *"Red Alert"* - v6-to-LT1 Swapped Cruiser; Cammed, Stalled, Enjoyed "Gone But Not Forgotten" 2016 Camaro 1LT A8 - "Elmo" 2014 Camaro 1LT M6 - "Cherry Bomb" 2012 Camaro 1LS M6 - "Clifford" Michigan FBody Association http://www.mifbody.com/

09-26-2016, 07:51 AM	#4
PolynesianPowerhouse Big Samoan ina little car Drives: 2016 camaro Join Date: May 2014 Location: Tofiga Island Posts: 1,872	Good stuff. I remember phastek was having problems topping out or something so they only netted about 240ish. They figured it was about 25-35 lower than what it should be. Good to see someone got it done. __________________ Don't sit around and watch everyone else live YOUR dreams...DO SUMPT'N When I see posts asking "whats the best intake, exhaust, etc" .... the answer to that is like a grandfather telling his grandkids "if you put salt on a birds tail, it'll let you catch it" #ThinkAboutIt "Winning Tip: Don't take my (or anyone else's) word for it. GO TEST IT!" - Dennis Grant

09-26-2016, 07:52 AM	#5
meissen Founder - Michigan FBody Drives: 1994 Camaro LT1, 2012 Camaro 2SS/RS Join Date: Jun 2008 Location: New Haven, MI Posts: 2,599	The person running the dyno was well familiar with my 2012 and 2014 Camaros that were both v6 6-speeds and had to be ran in 3rd gear to avoid topping out on MPH. If my memory serves correctly, he said he kept it in 5th gear for the runs so he would avoid hitting the speed limiter. __________________ 2012 Camaro 2SS/RS L99 - *"Zooma"* 1994 Camaro LT1 A4 - *"Red Alert"* - v6-to-LT1 Swapped Cruiser; Cammed, Stalled, Enjoyed "Gone But Not Forgotten" 2016 Camaro 1LT A8 - "Elmo" 2014 Camaro 1LT M6 - "Cherry Bomb" 2012 Camaro 1LS M6 - "Clifford" Michigan FBody Association http://www.mifbody.com/

09-26-2016, 09:33 AM	#7
meissen Founder - Michigan FBody Drives: 1994 Camaro LT1, 2012 Camaro 2SS/RS Join Date: Jun 2008 Location: New Haven, MI Posts: 2,599	This is on a 2016 Camaro v6 8speed automatic with NPP. It made the exact same rwhp numbers as my v6 6-speed manual 5th gens. Edit: I have to update my signature - I traded my 2014 Camaro in for a 2016 back in June Edit Edit: I just realized the OP said "2014" where it should have said 2016. Sorry for the confusion. __________________ 2012 Camaro 2SS/RS L99 - *"Zooma"* 1994 Camaro LT1 A4 - *"Red Alert"* - v6-to-LT1 Swapped Cruiser; Cammed, Stalled, Enjoyed "Gone But Not Forgotten" 2016 Camaro 1LT A8 - "Elmo" 2014 Camaro 1LT M6 - "Cherry Bomb" 2012 Camaro 1LS M6 - "Clifford" Michigan FBody Association http://www.mifbody.com/

09-26-2016, 07:32 AM	#2
MiamiBlueCamaro Drives: Gen 6 Camaro RS Join Date: Dec 2015 Location: Miami FL Posts: 1,725	This looks legit.

09-26-2016, 09:27 AM	#6
Weedo Drives: 2016 Camaro RS Join Date: Sep 2016 Location: Charlotte NC Posts: 18	I think i confused myself... The 277hp is for your 2016? Or 2014?

12-01-2021, 02:59 PM	#9
Enriquez Drives: Camaro LS 2018 Join Date: Dec 2021 Location: Texas Posts: 1	Camaro6 This is what I got on my Camaro 2018 V6 with realdash

12-01-2021, 05:42 PM	#10
versionx Drives: 2019 Camaro 1LT 3.6 v6 Join Date: Sep 2019 Location: PA Posts: 32	What is the numbers before the tune?

User Name		Remember Me?
Password