Installed RPI Designs Stealth Splash Guards on the Front - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Welker2 · 05-05-2017, 12:22 PM

Quote:

Originally Posted by JLSuperfly

I have these installed in my car for over two years now. It is holding up well. I only used what came with the package when I installed it.

I've had mine on for over 2 years, installed with only the included hardware and as instructed, with absolutely no problems as well ... still look as good as new.

ron123 · 05-05-2017, 09:13 PM

Quote:

Originally Posted by moons21

Quote:

Originally Posted by ron123

Here are the OEM Chevy Camaro ZL1 spash guards, very strong, like how the contour makes them stealth.
Amazing how the back molded curved piece fits in perfectly. Chevy Engineers did their homework on this set.
Attaches to all original fastener locations -- Only one hole is called for to be drilled in front fender lip, but that is optional in my opinion.

Thanks for the heads up...
Do you have the OEM part # for these so I can referance that if and when mine get destroyed?

The full set OEM part # for front and back from my instruction sheet shows (I paid $120):
#23114080
or I see newer number on ebay:
#23114083

You can also buy just front or back set separate.
Best to make sure the set you order are the stealth splash guards not the bigger clunky mud guards, there seems to be confusion on ebay with the part numbers -- maybe Chevy re-used that part number on two different items.
If not in hurry may find a good deal on them.
Ron

ron123 · 05-05-2017, 09:18 PM

Quote:

Originally Posted by ARCTIC

So does ZL1 fit all Camaros? Even my lowly LT?

Yes the OEM ZL1 set showed that would work. When ordering, it only warned it would not work if the optional factory aero ground effects package was installed.

Ronn · 05-06-2017, 11:48 AM

Punched that number into gmpartshouse and came up with this
http://www.gmpartshouse.com/oe-gm/23114083

Picture shows the big clunky ones.

I saw the ones on ebay and are OEM front and rear. Here's the link:
http://www.ebay.com/itm/14-15-Chevro...JXpIoU&vxp=mtr

Ronn · 05-06-2017, 11:52 AM

Thanks Ron

Mr_Draco · 05-06-2017, 03:54 PM

Quote:

Originally Posted by pyroguy

Interested in hearing how these hold up as well. I was looking at going with them when I get wider tires as the car already takes a beating sometimes and with wider tires I don't want to totally destroy my paint.

I installed these the first week I bought my car back in 2010. They still hold up great with no issues. However I would not put 3M tape on the back like the OP did. Small pebbles and rocks constantly get stuck behind the front ones and the only way to remove them is to loosen the guards.

05-06-2017, 11:48 AM	#18
Ronn Drives: 2010 Camaro Join Date: Mar 2010 Location: Northern Ontario Posts: 1,181	Punched that number into gmpartshouse and came up with this http://www.gmpartshouse.com/oe-gm/23114083 Picture shows the big clunky ones. I saw the ones on ebay and are OEM front and rear. Here's the link: http://www.ebay.com/itm/14-15-Chevro...JXpIoU&vxp=mtr __________________ 1SS / RS / M6 / IOM / Black rally stripes / Polished wheels It's a high school prom, it's a Springsteen song, it's a ride in a Chevrolet...

05-06-2017, 11:52 AM	#19
Ronn Drives: 2010 Camaro Join Date: Mar 2010 Location: Northern Ontario Posts: 1,181	Thanks Ron __________________ 1SS / RS / M6 / IOM / Black rally stripes / Polished wheels It's a high school prom, it's a Springsteen song, it's a ride in a Chevrolet...