10-22-2016, 11:25 AM | #1 |
Drives: 2010 2SS/RS Camaro CGM Join Date: Aug 2011
Location: "The Shoals" Alabama
Posts: 767
|
Not getting any power to fuel pump.
Ok, so a week ago or so, my car stopped getting fuel when I would try to crank it. When I turned on the switch, I couldn't hear the fuel pump cycling, so I thought it was the fuel pump. Upon removal from the car, I wired it to a known hot battery and the pump worked fine. I had already checked the 20amp fuse in the trunk so my next thoughts were a relay. I found out where the fuel control module was and went ahead and just ordered one. Took the back seat out and all of that and installed the new Fuel control module. Still not getting any power to the pump. Does anyone have any pointers before I throw a match to it
But seriously, even as an electrician, I HATE diagnosing automotive electrical problems and any help is greatly appreciated
__________________
2010 Camaro SS L99... has a few mods |
10-22-2016, 02:07 PM | #2 |
Drives: 2010 2SS/RS Camaro CGM Join Date: Aug 2011
Location: "The Shoals" Alabama
Posts: 767
|
Thinking it may be the Fuel Pressure Sensor, going to get a scan tool and check it Monday, don't feel like even touching it today, lol.
__________________
2010 Camaro SS L99... has a few mods |
04-20-2019, 10:59 PM | #3 |
Account Suspended
Drives: 15 2lt RS Top Gun Camaro Join Date: Mar 2019
Location: us
Posts: 389
|
What was the solution?
|
|
|
|
|