10-21-2019, 09:22 AM | #1 |
Drives: 2012 Camaro SS L99 Cammed Join Date: Jun 2015
Location: Enumclaw, WA
Posts: 24
|
GPI SS3 VVT Cam with extras
GPI SS3 VVT cam with timing cover, cam phaser with limiter installed, timing chain, timing chain guide with both bolts, cam retainer plate, and cam position sensor with harness.
Fastest 1/4 mile was 11.65 and had a best of a 1.58 60’ on a 3.45 gear diff (was a temporary replacement). This was cam only with supporting mods on stock suspension. $300 plus shipping PayPal only. |
10-23-2019, 06:06 PM | #2 |
Drives: 2015 2SS Join Date: Jul 2018
Location: Bermuda Dunes, California
Posts: 47
|
How are the street manners with this cam and does it require upgrades to the lifters? Thanks
Sent from my SM-G965U using Tapatalk |
10-24-2019, 09:02 AM | #3 |
Drives: 2012 Camaro SS L99 Cammed Join Date: Jun 2015
Location: Enumclaw, WA
Posts: 24
|
|
10-25-2019, 06:53 PM | #4 |
Drives: 2012 camaro 2ss rs L99 Join Date: Feb 2017
Location: North Sioux city SD
Posts: 446
|
Not trying to hijack, but the ss3 is a VERY steetable cam. It's got a nice lope that draws a lot of attention. I daily drive mine and like it a lot, I had the ss1 first and this is a nice upgrade.
You will want/need a stall and it loves deeper gears too.
__________________
2012 2SS/RS, L99, no cats/mufflers, Ported intake manifold, fuel rail upgrade, ID1050x injectors, Vmax throttle body, 25% UDP, GPI DOD delete, GPI SS3, GPI cnc heads, GPI – 5/16″ Hardened Pushrods, BTR trunion upgrade, BTR .660 springs, pcv revamp w/dual catch cans, Circle D 3800, full BMR suspension & bushings. ZL1 fuel pump, HPT programmed fpcm. JMS bap, Snow VC-50 methanol setup. custom 4gal methonal tank, vs7875 turbo, FMIC, precision 46mm WG, 50mm BOV, 3bar map, SJM line lock, Innovate SCG-1, Hurst shifter with tap shift mod, ×2 Holley 14" fans Diy E85, Diy auxiliary pump
|
10-30-2019, 03:54 PM | #5 |
Drives: 2012 Camaro SS L99 Cammed Join Date: Jun 2015
Location: Enumclaw, WA
Posts: 24
|
Bump
|
11-04-2019, 11:07 AM | #6 |
Drives: 2012 Camaro SS L99 Cammed Join Date: Jun 2015
Location: Enumclaw, WA
Posts: 24
|
Bump
|
11-08-2019, 08:53 AM | #7 |
Drives: 2012 Camaro SS L99 Cammed Join Date: Jun 2015
Location: Enumclaw, WA
Posts: 24
|
Price reduced to $275 plus shipping
|
11-16-2019, 09:20 PM | #8 |
Hey, is it still available? How many miles on it?
__________________
TSP 1 7/8" Headers, Cat Delete / Flowtech Mufflers, Vmax CNC Ported TB, SLP UD Pulley 25%, Elite Catch Can, Vararam CAI, Vararam Power Wedge, Taylor 49 Race Wires, Mishimoto Silicone Hoses, B&M Transmission Pan,
Tampa Tuning Tweaked & Tweaked again |
|
11-18-2019, 06:06 PM | #9 |
Drives: 2010 SS L99 IOM Join Date: Aug 2012
Location: CA
Posts: 1,924
|
What stall were you using with this cam?
__________________
369rwhp/392rwtq
"Spending money I don't have, to buy parts I don't need, to impress people I don't know!" -Jenkins |
11-19-2019, 10:14 AM | #10 |
Drives: 2012 Camaro SS L99 Cammed Join Date: Jun 2015
Location: Enumclaw, WA
Posts: 24
|
|
11-19-2019, 10:16 AM | #11 |
Drives: 2012 Camaro SS L99 Cammed Join Date: Jun 2015
Location: Enumclaw, WA
Posts: 24
|
|
11-21-2019, 05:15 PM | #12 |
Drives: Summet white , Camaro 2SS 2013 Join Date: Jan 2017
Location: Florida
Posts: 87
|
How much whp were you making
|
|
|
|
|