What did you do to your 6th Gen Camaro today?! - Page 1078

zedts1986 · 04-20-2024, 07:15 PM

Removed the winter floor mats and put in my brand new Lloyd’s Luxe mats. Absolutely love the look.

Also installed my Blendmount radar detector mount and hardwire kit (into the mirror). Works and looks great!

Edit: Christ, sorry for the picture formatting. Hope you’re viewing on your phone for easy rotating.

IMCWORTH · 04-20-2024, 07:41 PM

New Air Intake

Texas1ss · 04-20-2024, 10:17 PM

Quote:

Originally Posted by SS_Don

Just be glad the elephants dont' fly.

LOL. That's a great one. Here in Texas when the birds migrate for the upcoming winter, there will be thousands of them flying around. Cool to watch, unless you're stuck at a red light where they're taking a break from flying right above your vehicle.

Couple of times I've been under them at stoplights praying the light changes quick. I avoided disaster, but how I have no damn clue. There were tons of them little f'ers roosting and still flying around.

beowulf556 · 04-21-2024, 03:34 PM

First time on the new lift! Did an oil change, rear diff fluid change and installed a skipshift eliminator. It's not forcing me into 4th but still flashes the message, is that normal?

67LSXCamaro · 04-21-2024, 04:52 PM

Quote:

Originally Posted by nismofreak

Before taking her out of hibernation, added rock guards and side skirts.

(excuse my finger

)

Trying to install my Camaro badge. Is there anyway you could measure from the bottom of the fender to the top of the letters on the "C" and the "M"? Making sure I get mine straight.

2SS Capt · 04-21-2024, 05:17 PM

4 Years, 3 months and 4 days since delivery...

ZPirate · 04-21-2024, 05:30 PM

Quote:

Originally Posted by 67LSXCamaro

Trying to install my Camaro badge. Is there anyway you could measure from the bottom of the fender to the top of the letters on the "C" and the "M"? Making sure I get mine straight.

Is it the Heritage Camaro badge? If so it should come with a template to allow you to place the badge in the right place.

SSDan · 04-21-2024, 06:14 PM

Quote:

Originally Posted by beowulf556

First time on the new lift! Did an oil change, rear diff fluid change and installed a skipshift eliminator. It's not forcing me into 4th but still flashes the message, is that normal?

That’s a nice setup! I would love to have my own lift. You have blocked out the mechanical lock out but the message will still come up. The shift message can only be removed in the tune.

67LSXCamaro · 04-21-2024, 07:46 PM

Quote:

Originally Posted by ZPirate

Is it the Heritage Camaro badge? If so it should come with a template to allow you to place the badge in the right place.

I actually bought the Panther Camaro badge. It comes with the foam which I assume aligns it off the fender edge but didn't know how far up from the bottom of the fender it goes?

beowulf556 · 04-21-2024, 08:53 PM

Quote:

Originally Posted by SSDan

That’s a nice setup! I would love to have my own lift. You have blocked out the mechanical lock out but the message will still come up. The shift message can only be removed in the tune.

Good to know, thanks brother!

Dirtbike · 04-21-2024, 09:25 PM

[QUOTE=beowulf556;11419903] installed a skipshift eliminator. It's not forcing me into 4th but still flashes the message, is that normal?

That's normal. If you want to get rid of the message, you'll have to turn it off in the tune.

SnakeEyeSS · 04-23-2024, 04:22 PM

Got new LED reverse and plate light lights in the ZL1 These 7440's are plug and Play I guess, no harness or resistors used. I even bought the resistors and was ready to solder.

https://www.ebay.com/itm/224149257615

wilbur_xmas · 04-23-2024, 05:07 PM

Quote:

Originally Posted by Craig

For $70 the EOS rock guards were worth a try. O’reilly’s had shallow well torx sockets and the rears went on in 15 minutes with the car on the ground. They look pretty good and fit well for the money at the expense of coverage. Undecided on riveting the fronts but PPF goes on next week so those will wait regardless.

I've used the EOS guards with great results on a couple of Camaros and attached the fronts with the poly rivet tool from Harbor Freight and some double sided tape. They pass the track day test and keep the rock chips on the hips to a minimum. IMO they are a great alternative to the other type of front guards that use a metal clip that scratches up the fender metal, creates a nice entry point for rust, and fly right off on the front straight at Laguna Seca.

CalgaryZL1 · 04-23-2024, 05:18 PM

The slumber is over! Going to reset the oil monitor because it went to bed with fresh oil In September, so let’s see what it says.

04-20-2024, 07:15 PM	#15079
zedts1986 Drives: 2024 2SS 6MT Join Date: Dec 2019 Location: Buffalo, NY Posts: 135	Removed the winter floor mats and put in my brand new Lloyd’s Luxe mats. Absolutely love the look. Also installed my Blendmount radar detector mount and hardwire kit (into the mirror). Works and looks great! Edit: Christ, sorry for the picture formatting. Hope you’re viewing on your phone for easy rotating. Attached Images __________________ Current: 2024 Camaro 2SS M6, Red Hot, Ceramic White interior, Dual Mode Exhaust, Magnetic Ride Control Old & Sold: 2019 Camaro 1LT M6, RaceChip GTS, RaceChip XLR, ZZP Catted downpipe, JacFab Boost-o-lator, K&N drop-in air filter, ZZP Intake Tube, PTP turbo blanket, NGK 6510s gapped at 0.022" Motorcycle enthusiast

04-20-2024, 07:41 PM	#15080
IMCWORTH Drives: 2023 Camaro Convertible ZL1 A10 Join Date: Mar 2023 Location: CA Posts: 150	New Air Intake Attached Images

04-21-2024, 03:34 PM	#15082
beowulf556 Drives: Camaro SS 1LE Join Date: Feb 2024 Location: Las Vegas Posts: 43	First time on the new lift! Did an oil change, rear diff fluid change and installed a skipshift eliminator. It's not forcing me into 4th but still flashes the message, is that normal? Attached Images __________________ 2018 Camaro SS 1LE (Garage Queen) 2000 Camaro SS FBO (Sold) 1996 Camaro Z28 (RIP) 2020 Mercedes A35 AMG (Daily)

04-21-2024, 05:17 PM	#15084
2SS Capt 2020 Shadow Gray 2SS Drives: 2020 2SS - A10, NPP, MRC, CAI Join Date: Dec 2019 Location: SoCal Posts: 3,039	4 Years, 3 months and 4 days since delivery... __________________ 2020 SGM 2SS - A10, NPP, MRC, Red Calipers, Black Camaro Fender Badge, Footwell Lighting *Added after delivery:* - GMP CAI, GMP Black Strut Tower Brace, MRR017 1LE Wheels, SS Armrest, Black Fuel Door, Stainless Sport Pedals, SS Wheel Caps, Black Lugs/Locks, GM Splash Guards, DD Smoked LED Markers, Smoked Rear Reflectors, Mishimoto Catch Can, Xpel PPF - Full Front, SunTek 35% Tint, CeramicPro coating, RST Stainless Brake Lines, Castrol SRF, MSD Super Conductor Wires *Left: My "fun" ride. Right: My "work" ride: a Gulfstream G600. One's top speed is 180 Mph, the other, 620 Mph...*

04-23-2024, 04:22 PM	#15090
SnakeEyeSS Drives: Camaro 2SS & ZL1 Join Date: Mar 2018 Location: Oklahoma Posts: 857	Got new LED reverse and plate light lights in the ZL1 These 7440's are plug and Play I guess, no harness or resistors used. I even bought the resistors and was ready to solder. https://www.ebay.com/itm/224149257615 __________________ 2017 Camaro 2SS A8 Bright Yellow NPP MRC 2023 Camaro ZL1 A10 Radiant Red

04-21-2024, 09:25 PM	#15089
Dirtbike Drives: Chevrolet Camaro Join Date: Feb 2020 Location: AL Posts: 44	[QUOTE=beowulf556;11419903] installed a skipshift eliminator. It's not forcing me into 4th but still flashes the message, is that normal? That's normal. If you want to get rid of the message, you'll have to turn it off in the tune.

04-23-2024, 05:18 PM	#15092
CalgaryZL1 Drives: 2020 Chevy Camaro ZL1 Join Date: Apr 2023 Location: Calgary Canada Posts: 1,499	The slumber is over! Going to reset the oil monitor because it went to bed with fresh oil In September, so let’s see what it says. Attached Images

User Name		Remember Me?
Password