JANNETTY RACING 416 YSI AUTO 2012 SS GOES 9.84 - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Trackman · 10-23-2013, 08:06 PM

Out of the box , that's impressive.

RX SS RACERX · 10-23-2013, 08:58 PM

Don't think Ted will mind me inserting 'Jewel' in his thread. After all he and his guys at JRE made her the beast she is today! I was at the same rental as Ted Friday. As usual Ted,Teddy Jr., and Tony were busy helping his customers get the most from their builds. I'm pretty stoked that Jewel was one of the fastest 'true street' cars there. 10.08 off the trailer. 10.03 next then a tune tweak from Ted-9.86@138mph. Caught my breath and got some launch tips from Ted and damn-PB of 9.75@139mph

. Was politely asked to lift before finish to keep it out of the 9's-I have EVERYTHING but the dang license-VERY SOON to be remedied

Anyways,thanks to Ted and all the guys at JRE for such an awesome car. More seat time and a few more tune tweaks should have Jewel in the mid 9's

.

JRE! Now

Bill

mandra · 10-23-2013, 09:10 PM

Hey that was me in the first vid. Figures I hit the limiter in 3rd and had a terrible pass.

That car was screaming quick!

UNRIVALED SS · 10-23-2013, 09:34 PM

Quote:

Originally Posted by JANNETTYRACING

JRE built 427 LS3
JRE Custom Cam
Vortech YSI supercharger
Vortech Cog Drive system
Aeromototive fuel system
ID-850 injectors
JRE built 6l80E
JRE built Differentail

Just the bigger Key points.

Ted.

Curious. Could you specify bore and stroke combo for JRE 427? I.E. 4.10 inch stroke or 4.125 sleeved block.

Thanks

ss/rs-matt · 10-23-2013, 11:31 PM

awesome work as always!!

JANNETTYRACING · 10-24-2013, 07:23 AM

Quote:

Originally Posted by UNRIVALED SS

Curious. Could you specify bore and stroke combo for JRE 427? I.E. 4.10 inch stroke or 4.125 sleeved block.

Thanks

It is an ERL 4.125 Superdeck Block

JANNETTYRACING · 10-24-2013, 07:24 AM

Quote:

Originally Posted by RX SS RACERX

Don't think Ted will mind me inserting 'Jewel' in his thread. After all he and his guys at JRE made her the beast she is today! I was at the same rental as Ted Friday. As usual Ted,Teddy Jr., and Tony were busy helping his customers get the most from their builds. I'm pretty stoked that Jewel was one of the fastest 'true street' cars there. 10.08 off the trailer. 10.03 next then a tune tweak from Ted-9.86@138mph. Caught my breath and got some launch tips from Ted and damn-PB of 9.75@139mph

. Was politely asked to lift before finish to keep it out of the 9's-I have EVERYTHING but the dang license-VERY SOON to be remedied

Anyways,thanks to Ted and all the guys at JRE for such an awesome car. More seat time and a few more tune tweaks should have Jewel in the mid 9's

.

JRE! Now

Bill

Yes We are So Proud of you but for what ever reason have no video to show off.

Ted.

Deezee · 10-24-2013, 07:58 AM

Great results guys!! What size rims on the black car? I'd love to see some pics of that car!

JANNETTYRACING · 10-24-2013, 08:03 AM

Quote:

Originally Posted by Deezee

Great results guys!! What size rims on the black car? I'd love to see some pics of that car!

17s all around to fit over the stock brakes.

I will see what I can do to get some pics up.

NickJRE · 10-28-2013, 08:45 AM

Quote:

Originally Posted by RX SS RACERX

Don't think Ted will mind me inserting 'Jewel' in his thread. After all he and his guys at JRE made her the beast she is today! I was at the same rental as Ted Friday. As usual Ted,Teddy Jr., and Tony were busy helping his customers get the most from their builds. I'm pretty stoked that Jewel was one of the fastest 'true street' cars there. 10.08 off the trailer. 10.03 next then a tune tweak from Ted-9.86@138mph. Caught my breath and got some launch tips from Ted and damn-PB of 9.75@139mph

. Was politely asked to lift before finish to keep it out of the 9's-I have EVERYTHING but the dang license-VERY SOON to be remedied

Anyways,thanks to Ted and all the guys at JRE for such an awesome car. More seat time and a few more tune tweaks should have Jewel in the mid 9's

.

JRE! Now

Bill

Awesome run Bill!!!! Wicked fast

Thanks for lunch as well, by the way!

TRC-SS · 10-28-2013, 07:50 PM

Another awesome build!!

Great work!

LS7 427 · 10-28-2013, 11:36 PM

I wanna run at sea level in the fall....damn. Thats some nice work Ted.

Bryan

JANNETTYRACING · 10-29-2013, 07:08 AM

Quote:

Originally Posted by CAMROSS

I wanna run at sea level in the fall....damn. Thats some nice work Ted.

Bryan

Thanks Bryan, We still have a lot left in your car we will get you there.

Ted.

JANNETTYRACING · 02-07-2014, 10:26 AM

Quote:

Originally Posted by TRC-SS

Another awesome build!!

Great work!

Thanks Tim, Your Next

10-23-2013, 08:58 PM	#16
RX SS RACERX Drives: 2010 2SS/RS RJT Join Date: Jun 2010 Location: MOUNTAIN MARYLAND Posts: 279	Thread Jack Sorta:-) Don't think Ted will mind me inserting 'Jewel' in his thread. After all he and his guys at JRE made her the beast she is today! I was at the same rental as Ted Friday. As usual Ted,Teddy Jr., and Tony were busy helping his customers get the most from their builds. I'm pretty stoked that Jewel was one of the fastest 'true street' cars there. 10.08 off the trailer. 10.03 next then a tune tweak from Ted-9.86@138mph. Caught my breath and got some launch tips from Ted and damn-PB of 9.75@139mph. Was politely asked to lift before finish to keep it out of the 9's-I have EVERYTHING but the dang license-VERY SOON to be remedied Anyways,thanks to Ted and all the guys at JRE for such an awesome car. More seat time and a few more tune tweaks should have Jewel in the mid 9's. JRE! Now Bill __________________ 9.75 @ 139mph, 1.41 60ft, 2010SS, JRE Built!

10-23-2013, 09:10 PM	#17
mandra Drives: 2011 Camaro SS2RS M6 Join Date: Oct 2007 Location: New York Posts: 54	Hey that was me in the first vid. Figures I hit the limiter in 3rd and had a terrible pass. That car was screaming quick! __________________ 2011 - SS2RS M6 CAI intake, 18" TSW Nurburgrings, ARH Full exhaust 13.004 at 110.76Mph - bone stock Going to the track again right after a tune!

10-23-2013, 11:31 PM	#19
ss/rs-matt Drives: 2015 ZL1 Join Date: Aug 2011 Location: California Posts: 1,731	awesome work as always!! __________________ "Want to know whats cooler than your murdered out Honda Civic? ...Any Audi." Daniel Tosh

10-28-2013, 07:50 PM	#25
TRC-SS 700RWHP-650TQ Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010 Location: Shrewsbury Massachusetts Posts: 5,269 View My Garage	Another awesome build!! Great work! __________________ View Build HERE>>>>>MY 2011 2SS/RS JOURNAL

10-28-2013, 11:36 PM	#26
LS7 427 10.11 @ 136.32 Drives: Black & Yellow 2SS/RS LPE LS7 427 Join Date: Mar 2010 Location: Redcliff, Alberta Posts: 957 View My Garage	I wanna run at sea level in the fall....damn. Thats some nice work Ted. Bryan __________________ My Build Journal Built, Tuned and Maintained By........

10-23-2013, 08:06 PM	#15
Trackman Drives: 67RS Camaro ,Black 2013 ZL1 Join Date: Jun 2010 Location: Alberta Posts: 1,408	Out of the box , that's impressive.

10-24-2013, 07:58 AM	#22
Deezee Drives: 2013 SS/RS Join Date: Jul 2013 Location: Virginia Beach, VA Posts: 482	Great results guys!! What size rims on the black car? I'd love to see some pics of that car!