09-24-2020, 09:02 PM | #1 |
Drives: 2010 Camaro 2SS Join Date: Mar 2018
Location: Bakersfield, CA
Posts: 320
|
window cover
Does anyone know where I can find a window cover something similar for the shape of the Camaro window to fill it in entirely?
|
09-24-2020, 09:15 PM | #2 |
Drives: 2013 SS/RS, 2015 Camaro SS/RS Vert Join Date: Sep 2019
Location: Southern Nevada
Posts: 2,128
|
It's a cool idea, but 5%-15% tint does a great job for keeping prying eyes and sunlight out.
|
09-24-2020, 09:24 PM | #3 |
Drives: 2010 Camaro 2SS Join Date: Mar 2018
Location: Bakersfield, CA
Posts: 320
|
I already had those tints on my window got a ticket the first day they were installed.
|
09-25-2020, 12:23 PM | #4 |
Tint laws right? I happened to come across a waiver in FL. Had my Doc sign off on it because I have chronic migraines. 35% on the front and 20% everywhere else. Sadly still not as dark as I wanted it.
__________________
2013 Camaro SS/RS, Stainless Power long tube headers with HF's, Air Raid CAI, Solo Mach XL cat back, BC Racing coil overs, Elite Engineering catch can, Ferrada Forge 8 Wheels, Windows tinted at 20%, Tuned by Dyno Steve.
|
|
09-25-2020, 12:32 PM | #5 | |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,575
|
Quote:
I remember back in 1994 I got pulled over by FHP in my 1980 Monte Carlo. I had the windshield tinted in limo tint top and bottom with a little 4 inch sliver untinted, like a tank. He made me pull it off right there on the side of the road. It's the State Troopers you have to be careful to avoid.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
|
09-25-2020, 02:23 PM | #6 |
I went a few months back after I got the waiver to have the tint redone. I agree if I would have went below 20% on the sides Id have an issue backing out of the garage on a rainy night. Hard to see with the 20% with limited lighting back there. If I ever have it redone again, I think Ill go 5% on the rear and maybe 15% on the sides. Its too hot here without tint. I live in the panhandle. We have many days that hit triple digits.
__________________
2013 Camaro SS/RS, Stainless Power long tube headers with HF's, Air Raid CAI, Solo Mach XL cat back, BC Racing coil overs, Elite Engineering catch can, Ferrada Forge 8 Wheels, Windows tinted at 20%, Tuned by Dyno Steve.
|
|
09-26-2020, 01:26 PM | #7 |
Stovebolt BluFlame 6
Drives: '12 2LT/RS, IBM; '20 Traverse Prem Join Date: Oct 2011
Location: Wherever!
Posts: 893
|
Have you considered the clear ceramic "tint" films that are available? They cut the radiant heat load to the interior without impacting visibility. It works well for me here in Central Texas (Ft Hood area). I would have given anything to have used it when in Florida.
IT's been years since I lived in Florida and endured the heat of the sun; in '83 I had my GTI tinted with the darkest tint I could get--don't remember the percentage, if I even knew. It kept some of the heat out, but not as effective as the ceramics I have used since. It made it difficult to see to the rear or sides at night. Military--and stationed in California several years later; CHP would give me all kinds of grief until they saw the Florida plates and registration. I finally peeled it from the driver and passenger door windows for my own ease of seeing. |
09-27-2020, 11:18 AM | #8 |
Drives: 2011 Camaro 2ss Convertible Join Date: Jan 2020
Location: Birmingham alabama
Posts: 52
|
I got 35% done here in Bama. Been by a few LEO's, not a word. I'll admit though since the top is down more than it is up its prolly a "luck" thing. Most of the time though with the windows up I dont even get a hard look.
|
09-27-2020, 02:32 PM | #9 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,575
|
35% is legal in Alabama for side and rear windows. The requirement is at least 32% allowable light transmission with a 3% tolerance.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
09-27-2020, 02:43 PM | #10 | |
Drives: 2013 SS/RS, 2015 Camaro SS/RS Vert Join Date: Sep 2019
Location: Southern Nevada
Posts: 2,128
|
Quote:
My Camaro came with super dark tint all the way around but I've got used to it. I do very little driving at night any more. |
|
09-27-2020, 02:50 PM | #11 |
Drives: 12 2SS/RS L99,11 2SS/RS LS3totaled Join Date: Jun 2019
Location: mooresville nc
Posts: 1,048
|
nc is 35% and i'm happy with that.
|
09-27-2020, 03:30 PM | #12 |
It don’t come easy.
|
50% side and 35% rear, here in WI. Side and rear @ 25%. Very rarely anywhere at dark with this ride and usually with side windows down. Haven’t had any issues, to date.
The installer and I both agreed that “ now it looks like it’s supposed to.
__________________
|
09-27-2020, 04:08 PM | #13 | |
Drives: 2011 Camaro 2ss Convertible Join Date: Jan 2020
Location: Birmingham alabama
Posts: 52
|
Quote:
And there is the reason. When I got it done the tinter said 15% but when I looked at a car with 15%, dirty windows would be darker. |
|
|
|
|
|