10-16-2014, 02:05 PM | #1 |
Drives: 2011 2SS/RS A6, IOM Join Date: May 2009
Location: West Los Angeles
Posts: 1,236
|
Cell phone holders/holsters?
Did a search, no luck. With the wife onboard for long trips we have two cell phones plugged into the console. Anybody have a good solution for holders or a holster of some type?
__________________
"...when the driver steps on the gas, I want him to
s--t his pants." Enzo Ferrari |
10-16-2014, 02:07 PM | #2 |
Drives: 2011 2LT/RS - Synergy Green Join Date: Mar 2013
Location: Auburn, Ga
Posts: 432
|
Curious as well ... using the gps on the phone, be nice to have a fitting holder. Instead of flopping the phone down into the cup holder. iPhone?
__________________
|
10-16-2014, 02:09 PM | #3 |
Drives: 2014 Camaro 2LT/RS Ashen Grey Join Date: Apr 2014
Location: Tampa, FL
Posts: 67
|
I am interested as well, I use spotify to jam to tunes while cruising and hate having to put my phone in the cup holder. I also wish there was a way to access spotify thru the mylink system but that's just wishfull thinking.
|
10-16-2014, 02:16 PM | #4 |
Drives: 2011 2LT/RS - Synergy Green Join Date: Mar 2013
Location: Auburn, Ga
Posts: 432
|
Lots of configurations here - http://www.proclipusa.com/
More like, pick and build a holder. Kind of neat.
__________________
|
10-16-2014, 08:28 PM | #5 |
Camaro Addict
Drives: 2010SS/1995 Z28/2005 CTSV/2007 TBSS Join Date: Jan 2007
Location: New Jersey
Posts: 220
|
I had one custom made. Fiberglass covered in stitched leather...
__________________
|
10-16-2014, 08:45 PM | #6 |
Big B
Drives: 2016 2SS Summit White Join Date: Aug 2009
Location: Mansfield , TX
Posts: 324
|
How did you get the word camaro in your screen?
__________________
2016 2SS,NPP exhauset, A8, Black and White interior, black rims, black center stripe. |
10-16-2014, 09:12 PM | #7 |
Drives: 2013 F-150 Join Date: Aug 2014
Location: United States
Posts: 297
|
|
10-16-2014, 09:16 PM | #8 |
Camaro Addict
Drives: 2010SS/1995 Z28/2005 CTSV/2007 TBSS Join Date: Jan 2007
Location: New Jersey
Posts: 220
|
It's a picture with the screensaver turned off ;)
__________________
|
10-16-2014, 10:10 PM | #9 |
Drives: 2011 SGM 1SS A6 & 2014 SW 2SS/RS M6 Join Date: Jul 2014
Location: Lighthouse Point, Fl
Posts: 490
|
Aliexpress.com makes some cool holders, I got one for the vents and it is sweet I have a lg g2 big phone but stays tight and right. I ran the charging cable under console so the end f2f sticks out at the bottom of phone. Take a look
|
10-16-2014, 11:54 PM | #11 | |
Drives: 2014 1SS/RS, 2018 Silverado CC Join Date: Apr 2014
Location: Oceanside, CA
Posts: 1,487
|
Quote:
|
|
10-17-2014, 11:43 AM | #12 |
Drives: 2010 2SS, 2017 Silverado LTZ Join Date: Jan 2007
Location: Denver,PA
Posts: 3,195
|
Go to Amazon.com Mount Guys. They have all kinds of mounts.
__________________
2010 2SS/RS Victory Red, MN6, 1-7/8 Kooks LT Headers, SLP Axle Back, Edelbrock E-Force S/C, ZL1 Fuel Pump, 72# Injectors, JRE fuel rail upgrade, Roto-Fab CAI, Elite Catch Can, Billet Hurst Shifter, DSS 1000HP axles, Spohn Trailing Arms, Toe Links, Lower Control Arms. Chrome American Racing Torq-Thrust wheels. 546/rwhp & 522/rwtq & 10.9# boost Tune by Jeremy Formato.
|
10-17-2014, 11:45 AM | #13 |
Drives: Evil Eva, 2010 2SS LS3 Join Date: Aug 2013
Location: Falls Church, Virginia
Posts: 3,600
|
Best Buy,
the Rocket Fish that clips to your vents. Works fine for the iPhone 5 and 6
__________________
"You simply cannot trust quotes found on the internet." -Abraham Lincoln
|
10-17-2014, 01:00 PM | #14 |
Res Ipsa Loquitur
Drives: 2013 Camaro SS Vert Supercharged Join Date: Sep 2012
Location: Southern Maryland
Posts: 726
|
I use the holders made by Kuda USA in my Camry and Suburban. Pretty pricey but very nice and have an OEM look. I don't have one in my Camaro, as I don't drive it that often, but here is a link to the Camaro options:
http://www.kudausa.com/kuda-custom-l...2010-k120.html
__________________
"STREET LEGAL" 2013 Camaro 2SS/RS LS3 Convertible -- 2.9l Whipple Supercharger, CDC SportBar, Cordon CR-1 and MRR M017 wheels, Hex Vents, RPI ZL1 Splitter, CAI, Pfadt Tri-Y Headers, high-flow cats, ZR1 3 bar map sensor, ZL1 fuel pump, 3.875" pulley, ADM FPCM, 1LE PCV Oil Separator Kit, Elite Catch Can, APEX scoop and washer bottle relocation kit, Hotchkis lowering springs, BMR sways, BMR toe rods, BMR trailing arms, 620 rwhp, 564 rwtq, and tuned by Andrew Zurick of Complete Street Performance by way of Maryland Speed.
|
|
|
|
|