Nitrous Times

[Monte]

Anyone have any track times for relatively stock cars with the giggle gas? I looked through the 1/4mi thread and there are none.

[Dan@showstopper]

Stay tuned this Spring.

[OrangeChevyII]

What are you calling stock? I went 10.90's but I had headers w/ full exhaust and a tune.

[SRT10KLLR]

I went 10.9 with a forged engine and a 200 shot. Also had a cam, heads, headers, CAI and tune. This was using a Nitrous Outlet plate kit with a dedicated fuel system. 91 octane pump gas in the tank with C16 in the dedicated tank. Was also using a NANO system. Without the NANO I ran 11.3. Was going to up the shot to 300 but going twin turbo now.

[LC]

Hey J,

Where was that? and what was the NA time of the car?

doing my "punieta mental" stuff for the M6+NO2 haha...

[Monte]

Originally Posted by OrangeChevyII

What are you calling stock? I went 10.90's but I had headers w/ full exhaust and a tune.

Pretty much exactly what I was looking for!

What kind of injection (port, nozzle, plate, etc), and what was the rated shot?

[SRT10KLLR]

Originally Posted by LC

Hey J,

Where was that? and what was the NA time of the car?

doing my "punieta mental" stuff for the M6+NO2 haha...

That was in Culichie. If it wasn't for the slipping and slow shifting tranny I am sure I could have gone a lot faster. My best NA was 12.0 at the same track.

Here are some vids of my back to back 11.3 runs. These were without the NANO because we ran out while tuning it on the street.





BTW, tengo un kit extra en Sin . Si lo ocupas le digo al carnal que te no mande.

[LC]

Originally Posted by SRT10KLLR

BTW, tengo un kit extra en Sin . Si lo ocupas le digo al carnal que te no mande.

what else do you have?

[SRT10KLLR]

What do you need?

I have a couple Hemi blocks, some turbos, widened stock Camaro wheels, CAI, 5.7L Hemi ported heads, stock and ported L92 heads, NANO kit, Nitto NT05R 315/35/20 tires, ARP studs(heads/mains) etc.

I got so much stuff I only have room for one car in a 3-car garage.

[LC]

sounds good, I may need a dolphin, do you have one of those laying around?

[SRT10KLLR]

Originally Posted by LC

sounds good, I may need a dolphin, do you have one of those laying around?

Actually yeh, I have Flipper the original dolphin.

[LC]

Send me Flipper, some killer whale named Willy and more info on the nitrous stuff

[SRT10KLLR]

Originally Posted by LC

Send me Flipper, some killer whale named Willy and more info on the nitrous stuff

Buying Flipper would be like buying Mr. Ed as he is famous TV star. Plus dolphins are very intelligent so they call for a premium selling price.

Isn't Willy living in Ensenada now?

The nitrous kit is a Nitrous Outlet 2010 Camaro Specific Plate System. It comes with the following features:

# Black Nitrous Outlet 10lb bottle.
# Nitrous Outlet high flow 45 degree bottle valve with dual accessory ports.
# The ports are designed to work with pressure assisted systems like NANO.
# Quality bottom exit high flowing solenoids built to work with today’s fuels.
# The highest flowing, best atomizing and best fitting Nitrous Plate available!
# Custom designed solenoid mounts.
# Prefabricated Stainless Hard lines.
# Precise fitment fittings.
# CNC machined fuel feed with Prefabricated Hard line.
# Quick release stainless steel bottle brackets.
# Bolts on using all factory equipment. (Including cold air box)
# Neatly hides away under factory engine cover.
# TPS extension harness included.
# Jetting from 50-200 HP.
# Capable of supporting horse power levels up to 400 HP!
# E85 Compatible with different jetting.
# Made in the USA!

Here are some pics:




You can get more info and pics on this thread:
http://www.camaro5.com/forums/showth...=103127&page=2





BTW, my suegra is here but will be going back in a week so if you need something I can have her take it down there.

[LC]

meh I don't know, never liked the idea of mounting the TB the other way... just for plain looks haha.. how much do you want for it, are you going to sell the NANO stuff?