View Poll Results: How much negative camber? | |||
< -1.5 | 2 | 18.18% | |
> -1.5 | 4 | 36.36% | |
> -1.8 | 2 | 18.18% | |
≥ -2.0 | 3 | 27.27% | |
Voters: 11. You may not vote on this poll |
Post Reply
|
|
Thread Tools |
03-02-2018, 08:08 AM | #1 |
Drives: 1SS HBM w/MRC NPP Join Date: Apr 2016
Location: Raleigh, NC
Posts: 297
|
How much negative camber have you gotten out of the front stock? SS non-1LE models
Title question and did you have to do anything excessive?
I'm stuck at -1.5 and I'm not thrilled about it. I was hoping to get as close to -2 as possible, but they shop gave up at -1.5. I trust they did everything within reason, but not anything some people would do themselves. |
03-02-2018, 08:50 AM | #2 |
Drives: 22 1SS 1LE Summit White Join Date: Sep 2016
Location: Milwaukee WI
Posts: 1,144
|
I was able to get -2 out of the front on mine.
Loosen the upper and lower bolt on the knuckle but don't take them off all the way. With an impact and a wrench on the upper nut and bolt push the top of the rotor in as far as you can go and when pushing hit the impact and lock it into place. the tighten the lower bolt. Thats how I managed to get -2.
__________________
#53 F Street
2022 Sponsor autocrossdigits.com Autocrossing Videos https://www.youtube.com/channel/UCm-...3tiMt0KOg_2Aag Instagram: apexit_53 2022 Rapid Blue 1SS 1LE 2019 D Street national champion (2019 civic Type R) |
03-02-2018, 08:55 PM | #3 |
Drives: 17 1SS 6MT, 09 Tacoma TRD Sport Join Date: Nov 2017
Location: Colorado
Posts: 149
|
Best my mechanic could to was -1.75 even Front. And it took two tries.
I guess there's some variability there in these cars. |
03-07-2018, 12:22 AM | #4 |
Drives: 2016 Camaro RS 1LT 2.0L Turbo Join Date: Apr 2016
Location: Alberta Canada
Posts: 349
|
-2.1° Front.
-2.4° Rear. That's what my local Chev dealership was able to achieve. I asked that they try to get to -2.5° front and rear. They said they couldn't get more out of the front because the wheel was contacting the strut. Not too sure about that but come spring I may go in for a realignment and sit in the car for it (I'm 210Lbs). Worth it to do it with me in the car? . I'd like a little less in the rear and more in the front.
__________________
'16 1LT 2.0T RS - Catless DP, Intake, Tune/ Eibach springs FE3 shocks/ BMR front bar FE4 rear bar/ Xpel'd front end, CP Reload sealed/ Radenso Pro M.
|
03-07-2018, 01:19 AM | #5 |
Drives: 2015 Camaro 1SS Join Date: Dec 2017
Location: Antelope, CA
Posts: 208
|
I have a V6 1le and could only get -1.7 in the front.
|
03-08-2018, 08:59 PM | #6 |
Drives: 2016 1SS Join Date: Jan 2016
Location: DC
Posts: 927
|
Just re-did mine. -1.9 one side. The other maxed at -2.1
Rear topped at 1.4 If you want to stay at positive toe. Every car will be a little different.
__________________
1SS, Black, Black Wheels, A8, MRC, NPP
|
|
|
Post Reply
|
|
|