shaft roller rockers PRW PQx - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

zz430camaro · 10-15-2019, 04:30 PM

I will honestly probably go with Jesel when I do the LLSR

KW Baraka · 10-16-2019, 11:45 PM

Quote:

Originally Posted by zz430camaro

I will honestly probably go with Jesel when I do the LLSR

Agreed!

Cheap rockers will save you money today, and cost you a LOT more money tomorrow.

KW

CFD · 10-17-2019, 05:22 AM

Perhaps not as popular but the Crower rockers I've been running are something you might want to check out. They are very good quality and well designed. They are also steel not aluminum, not cheap either.

brick59 · 10-17-2019, 08:15 AM

Quote:

Originally Posted by CFD

Perhaps not as popular but the Crower rockers I've been running are something you might want to check out. They are very good quality and well designed. They are also steel not aluminum, not cheap either.

I'm running the Crower roller rocker in my build, as said they are high quality.

zz430camaro · 10-17-2019, 11:11 AM

I did see those, very nice parts, expensive too. Another thing that suck is that a lot of these shaft rocker systems are head specific

lazerlemonta · 10-17-2019, 02:59 PM

I ran crower rockers 15 years ago on my grand am cup motor. Very nice quality

CFD · 10-17-2019, 04:38 PM

Crower is a very reputable company and has been for longer than many here are old. Lol. The rocker set up is not cheap but if you add up all the money I spent on Comp upgrades and then T&D rockers I could have bought a spare set up and put them on the shelf.

KW Baraka · 10-18-2019, 01:51 PM

Quote:

Originally Posted by CFD

Perhaps not as popular but the Crower rockers I've been running are something you might want to check out. They are very good quality and well designed. They are also steel not aluminum, not cheap either.

I run Crowers in the LTx that's in my '96 Impala. Stout rockers!!

KW

10-15-2019, 04:30 PM	#15
zz430camaro Drives: 2015 1LE Join Date: Oct 2015 Location: Cleveland, OH Posts: 1,485	I will honestly probably go with Jesel when I do the LLSR __________________ 2015 1LE, TSP 225/236 113+3, VMAX Throttle Body, CAI with race scoop, GPI Ported Intake, Land Speed Stage 2 Heads, 1-7/8 headers, NPP exhaust, 25% Fluidampr, LT1-S Monster Clutch, 485 RWHP & 444 TQ Last edited by zz430camaro; 10-15-2019 at 07:47 PM.

10-17-2019, 11:11 AM	#19
zz430camaro Drives: 2015 1LE Join Date: Oct 2015 Location: Cleveland, OH Posts: 1,485	I did see those, very nice parts, expensive too. Another thing that suck is that a lot of these shaft rocker systems are head specific __________________ 2015 1LE, TSP 225/236 113+3, VMAX Throttle Body, CAI with race scoop, GPI Ported Intake, Land Speed Stage 2 Heads, 1-7/8 headers, NPP exhaust, 25% Fluidampr, LT1-S Monster Clutch, 485 RWHP & 444 TQ Last edited by zz430camaro; 10-17-2019 at 11:22 AM.

10-17-2019, 02:59 PM	#20
lazerlemonta Drives: 2010 C6 1LT Join Date: Dec 2011 Location: Virginia Posts: 877 View My Garage	I ran crower rockers 15 years ago on my grand am cup motor. Very nice quality __________________ 2010 C6 JET STREAM BLUE BOLT ONS TO THE EXTREME, GPI 281cc HEADS, Darth_V8r SPEC CAM, FAST 102 INTAKE, CRANK SCRAPER, QUARTER MASTER 7.25" CLUTCH, RPM 3.90 STAGE II DIF, Z51 Gear Set AND E85 Best ET 10.58 @ 131.8 stock heads and stock cam 453/445 SAE 10.62@134.82 GPI 281CC Heads, SS4 Cam and X1 Intake Best 1/8 6.80@105.75 Best MPH 134.82

10-17-2019, 05:22 AM	#17
CFD Drives: 2SS/RS L99 BLACK Join Date: Apr 2010 Location: Franklin , MA Posts: 6,696	Perhaps not as popular but the Crower rockers I've been running are something you might want to check out. They are very good quality and well designed. They are also steel not aluminum, not cheap either.

10-17-2019, 04:38 PM	#21
CFD Drives: 2SS/RS L99 BLACK Join Date: Apr 2010 Location: Franklin , MA Posts: 6,696	Crower is a very reputable company and has been for longer than many here are old. Lol. The rocker set up is not cheap but if you add up all the money I spent on Comp upgrades and then T&D rockers I could have bought a spare set up and put them on the shelf.