Tucson Camaro's - Page 726 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Bodywerks · 08-02-2015, 09:21 AM

Nice.

Bodywerks · 08-06-2015, 06:53 PM

Meeting today?

FLYNNZL1 · 08-06-2015, 06:59 PM

Quote:

Originally Posted by Bodywerks

Meeting today?

No, next Thursday at Firehouse Subs on Thornydale. I will post soon.
Sean

Bodywerks · 08-06-2015, 08:16 PM

Already down that way anyway, gonna hit sportsman's

mar10 · 08-07-2015, 08:44 AM

The drag strip is going to be open tonight 11pm-4am. Im planning on going weather permitting. Anyone else going to be there?

slickmetal · 08-07-2015, 04:33 PM

Hi all! I am finally home!

Dirtdog · 08-07-2015, 06:17 PM

I'll be there tonight.

mar10 · 08-07-2015, 07:15 PM

Welcome back slickmetal.

Dirtdog hope to see you there. What kind of tires are you running? Last time I was there was on pzeros and I couldn't hook at all.

Dirtdog · 08-07-2015, 10:54 PM

Unfortunately, I'll be on my nitto invos... Start at 24 psi and see how that goes.

Yea I remember using the stock pzeros one time and then I never came back until I got the wider invos. If you try n launch hard, you will spin thru first and second and prob bog 3rd.
Launch low and lower the psi in the tires and you will def fare better than I did.

I'm in trouble and I know it. I think I will be launching around 2000-2500 and I will prob still spin.

jd4eva98 · 08-07-2015, 10:56 PM

Welcome home mike

Sent from my SCH-I535 using Tapatalk

mar10 · 08-07-2015, 11:21 PM

Quote:

Originally Posted by Dirtdog

Unfortunately, I'll be on my nitto invos... Start at 24 psi and see how that goes.

Yea I remember using the stock pzeros one time and then I never came back until I got the wider invos. If you try n launch hard, you will spin thru first and second and prob bog 3rd.
Launch low and lower the psi in the tires and you will def fare better than I did.

I'm in trouble and I know it. I think I will be launching around 2000-2500 and I will prob still spin.

I just got a set of contenental extremecontact dw tires. I haven't been back since I was on the pirreli tires. I'm hoping for better times. I spun 1st 2nd and 3rd. Was getting 13.5's at 111 mph. Got beat by quite a few cars with less power but I'd run them down pretty good towards the end.

Dirtdog · 08-07-2015, 11:39 PM

Quote:

Originally Posted by mar10

I just got a set of contenental extremecontact dw tires. I haven't been back since I was on the pirreli tires. I'm hoping for better times. I spun 1st 2nd and 3rd. Was getting 13.5's at 111 mph. Got beat by quite a few cars with less power but I'd run them down pretty good towards the end.

Thats exactly what i was doing. Mid 13s.

Practice practice practice. We'll kick ass tonight tho.

mar10 · 08-08-2015, 05:11 AM

The one run I got, I set my 2-step at 2400 rpms. Spun and wheel hopped like crazy so I let off. Got back in it and ran a 14.4 @111mph. Turned a 2.8 60ft.

FLYNNZL1 · 08-08-2015, 08:09 PM

This month’s meeting is Thursday, the 13th August at Firehouse Subs at Thornydale and Orange Grove. We will park behind Firehouse with the Freddy’s Cruise-in folks. We normally gather around 5:30, eat about 6:00, and pass on information shortly after. Please come out and join us and tour the cruise-in car show!
Hope to see you there!

08-02-2015, 09:21 AM	#10151
Bodywerks Drives: 2015 2SS/RS/1LE Join Date: Feb 2015 Location: Tucson Posts: 866	Nice. __________________ 2015 SS/RS/1LE HSA delete, VMAX throttle body, CAI inc. Intake, PRC255 heads, BTR 660 springs, BTR cryo-treated rockers, PAT G 232/240 .654/.626 110+2, johnson 2110's, Manton 502 pushrods, C5R, Melling high volume/high pressure, Powerbond 25% underdrive pulley, Proform covers, Kooks stepped headers, catless mids, Doug Thorley exhaust. 512rwhp, 446rwtq on a mustang dyno, tuned by Cunningham motorsports.

08-06-2015, 06:53 PM	#10152
Bodywerks Drives: 2015 2SS/RS/1LE Join Date: Feb 2015 Location: Tucson Posts: 866	Meeting today? __________________ 2015 SS/RS/1LE HSA delete, VMAX throttle body, CAI inc. Intake, PRC255 heads, BTR 660 springs, BTR cryo-treated rockers, PAT G 232/240 .654/.626 110+2, johnson 2110's, Manton 502 pushrods, C5R, Melling high volume/high pressure, Powerbond 25% underdrive pulley, Proform covers, Kooks stepped headers, catless mids, Doug Thorley exhaust. 512rwhp, 446rwtq on a mustang dyno, tuned by Cunningham motorsports.

08-06-2015, 08:16 PM	#10154
Bodywerks Drives: 2015 2SS/RS/1LE Join Date: Feb 2015 Location: Tucson Posts: 866	Already down that way anyway, gonna hit sportsman's __________________ 2015 SS/RS/1LE HSA delete, VMAX throttle body, CAI inc. Intake, PRC255 heads, BTR 660 springs, BTR cryo-treated rockers, PAT G 232/240 .654/.626 110+2, johnson 2110's, Manton 502 pushrods, C5R, Melling high volume/high pressure, Powerbond 25% underdrive pulley, Proform covers, Kooks stepped headers, catless mids, Doug Thorley exhaust. 512rwhp, 446rwtq on a mustang dyno, tuned by Cunningham motorsports.

08-07-2015, 08:44 AM	#10155
mar10 Drives: 2010 SS RS Join Date: Jan 2015 Location: AZ Posts: 406	The drag strip is going to be open tonight 11pm-4am. Im planning on going weather permitting. Anyone else going to be there? __________________ Stainless Power Longtube headers, off road mids, stock H pipe, flowmaster mufflers, Vararam tune model intake, NightFury cam, and 91 octane email tune from Dynosteve @ rdpmotorsport.com. 473 rwhp and 430 ft. Lbs. @3,235 ft elevation.

08-07-2015, 04:33 PM	#10156
slickmetal Drives: 2013 Black ZL1 A6 Join Date: Feb 2011 Location: AZ Posts: 491 View My Garage	Hi all! I am finally home! __________________ - 2013 Black ZL1 - A6 - Lingenfelter/Cordes Stage 2.5 packages E85 - FORE Fuel System - Kooks LTHs - Magnaflow Cans - Rotofab CAI/Big Gulp/Coolant Tank - Savini 3pc Forged - Underhood Dress Up (ACC & Drake & Moroso) - Hurst Shifter Kit - Custom Audio w/ JL Audio Sub/Amp/Stealthbox - Hand Polished Brace - Oracle Ghost Sidemarkers - LEDs everywhere - 624/617 on E85 & 545/548 on 91 (Sept 2015) - 693rwhp (Dec 15)

08-07-2015, 06:17 PM	#10157
Dirtdog Pro Hide n Seek Player Drives: 2010 SS LS3/LSA 620whp/630tq Join Date: May 2009 Location: Tucson, AZ Posts: 921 View My Garage	I'll be there tonight. __________________ 620whp/630wtq. ADM LSA Conversion, E85, PFADT Tri-Y Headers into Borla S, PFADT Swaybars, Springs, Links, 20x10 20x11 Forgestar F14s, Lots of AAC

08-07-2015, 07:15 PM	#10158
mar10 Drives: 2010 SS RS Join Date: Jan 2015 Location: AZ Posts: 406	Welcome back slickmetal. Dirtdog hope to see you there. What kind of tires are you running? Last time I was there was on pzeros and I couldn't hook at all. __________________ Stainless Power Longtube headers, off road mids, stock H pipe, flowmaster mufflers, Vararam tune model intake, NightFury cam, and 91 octane email tune from Dynosteve @ rdpmotorsport.com. 473 rwhp and 430 ft. Lbs. @3,235 ft elevation.

08-07-2015, 10:54 PM	#10159
Dirtdog Pro Hide n Seek Player Drives: 2010 SS LS3/LSA 620whp/630tq Join Date: May 2009 Location: Tucson, AZ Posts: 921 View My Garage	Unfortunately, I'll be on my nitto invos... Start at 24 psi and see how that goes. Yea I remember using the stock pzeros one time and then I never came back until I got the wider invos. If you try n launch hard, you will spin thru first and second and prob bog 3rd. Launch low and lower the psi in the tires and you will def fare better than I did. I'm in trouble and I know it. I think I will be launching around 2000-2500 and I will prob still spin. __________________ 620whp/630wtq. ADM LSA Conversion, E85, PFADT Tri-Y Headers into Borla S, PFADT Swaybars, Springs, Links, 20x10 20x11 Forgestar F14s, Lots of AAC

08-07-2015, 10:56 PM	#10160
jd4eva98 Drives: 2013 camaro Join Date: Jul 2013 Location: casa grande Posts: 144	Welcome home mike Sent from my SCH-I535 using Tapatalk

08-08-2015, 05:11 AM	#10163
mar10 Drives: 2010 SS RS Join Date: Jan 2015 Location: AZ Posts: 406	The one run I got, I set my 2-step at 2400 rpms. Spun and wheel hopped like crazy so I let off. Got back in it and ran a 14.4 @111mph. Turned a 2.8 60ft. Attached Images __________________ Stainless Power Longtube headers, off road mids, stock H pipe, flowmaster mufflers, Vararam tune model intake, NightFury cam, and 91 octane email tune from Dynosteve @ rdpmotorsport.com. 473 rwhp and 430 ft. Lbs. @3,235 ft elevation.

08-08-2015, 08:09 PM	#10164
FLYNNZL1 Account Suspended Drives: Man Join Date: Apr 2009 Location: Usa Posts: 3,175 View My Garage	This Month's Meeting This month’s meeting is Thursday, the 13th August at Firehouse Subs at Thornydale and Orange Grove. We will park behind Firehouse with the Freddy’s Cruise-in folks. We normally gather around 5:30, eat about 6:00, and pass on information shortly after. Please come out and join us and tour the cruise-in car show! Hope to see you there!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
70 Camaros reported at Wentzville, MO Rail Yard	Liberty1	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	34	08-26-2009 10:40 AM
Need Pic's of Camaro's!!!!!!!!	Camarosales70	Camaro Photos \| Spyshots \| Video \| Media Gallery	0	07-04-2009 11:14 PM
Chance to drive 2010 Camaros......	fbodfather	5th Gen Camaro SS LS LT General Discussions	15	06-18-2009 08:13 AM
Ton of new Camaros on cars.com	Shadowmind	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	5	06-01-2009 09:19 PM
Firsthand report: just sat in two Camaros at the Cleveland Auto Show	Attorneyguy	5th Gen Camaro SS LS LT General Discussions	154	03-01-2009 09:40 PM