who sells aftermarket rear ends / diff (or diff parts) for the 2010 camaro - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

hamidar05 · 07-12-2010, 08:37 PM

Patience is a virtue and all good things in time.

I will let others burn their cash and wait to find out what works and what does not.

Hendrix-Engineering · 07-13-2010, 04:17 PM

Quote:

Originally Posted by jrpxxii

I wish people wouldnt even mention new products until they are actually available to purchase as they never have the products done even close to the estimated dates and keep all of us sitting around waiting. Then again, maybe thats part of their marketing stategy but I personally get tired of hearing "In about 30 days it will be ready....." and then 2 months later "In about 30 days....."

Hows this ,we will be glad to take your money in 2 weeks

Hendrix-Engineering · 07-13-2010, 04:19 PM

Quote:

Originally Posted by fastfaster

dont forget that i'm on your list when it is available!

Two weeks ,maybe less

jrpxxii · 07-14-2010, 10:03 AM

Please, Im dying for someone to come out with a solution to take more of my money. Now your on the spot, 2 weeks or less. I will be waiting patiently.

Hendrix-Engineering · 07-15-2010, 07:52 AM

Quote:

Originally Posted by jrpxxii

Please, Im dying for someone to come out with a solution to take more of my money. Now your on the spot, 2 weeks or less. I will be waiting patiently.

I understand! im putting the production run pieces in friday and will start taking monday NEXT WEEK!! We will have pictures,pricing and info up ASAP!!! Thanks for all the intrest guys

fastfaster · 07-19-2010, 06:07 PM

Quote:

Originally Posted by Hendrix-Engineering

I understand! im putting the production run pieces in friday and will start taking monday NEXT WEEK!! We will have pictures,pricing and info up ASAP!!! Thanks for all the intrest guys

do you have any "preview pics" to entertain us until the release date?

speedster · 07-19-2010, 09:15 PM

Quote:

Originally Posted by jrpxxii

Please, Im dying for someone to come out with a solution to take more of my money. Now your on the spot, 2 weeks or less. I will be waiting patiently.

Agreed.

Quote:

Originally Posted by Hendrix-Engineering

I understand! im putting the production run pieces in friday and will start taking monday NEXT WEEK!! We will have pictures,pricing and info up ASAP!!! Thanks for all the intrest guys

I really hope so. Pics and pricing please. Also some specs - centersections, available gearing, axles/splines, estimated HP capacity, etc.

Thanks...

fastfaster · 07-23-2010, 03:45 PM

i'm hoping for some pictures too.

jrpxxii · 07-23-2010, 04:25 PM

We cant even get pics or specs?

600hp-lpe · 07-23-2010, 05:38 PM

any word???

or better yet, Pic's of the product?

Hendrix-Engineering · 07-23-2010, 07:13 PM

Quote:

Originally Posted by 570hp-lpe

any word???

or better yet, Pic's of the product?

There will be tons of pictures over the next few weeks and we will have 10 more ready to go in about 3 weeks .It will be worth the wait

orange10s.c. · 07-23-2010, 07:24 PM

The Hendrix parts are going to be awsome. I got some of the new axles going in next week !!!

midgard · 07-24-2010, 06:17 AM

Thank You Hendrix....we will put the complete kit to good use just a few days after we get them next week!

Did I hear 2000 hp rating?

Solid 9's are definitely in the works for me now in about a week or so .......between the boost increase and about 4 or 5 more mods. Power numbers should be coming early next week. Might even have a run by Friday (hopefully after the 9" kit is installed...otherwise a 2nd set of runs probably will be in the works the following week).

Hendrix-Engineering · 07-25-2010, 07:04 AM

Quote:

Originally Posted by midgard

Thank You Hendrix....we will put the complete kit to good use just a few days after we get them next week!

Did I hear 2000 hp rating?

Solid 9's are definitely in the works for me now in about a week or so .......between the boost increase and about 4 or 5 more mods. Power numbers should be coming early next week. Might even have a run by Friday (hopefully after the 9" kit is installed...otherwise a 2nd set of runs probably will be in the works the following week).

One things for sure this rear setup will take whatever you throw at it!!! I think you can finally see what that monster can do without fear of breaking!What gear are you going with? Ive seen they offer a 7.23 for the 9 inch!!!!!lol

07-12-2010, 08:37 PM	#29
hamidar05 Drives: 10 Camaro/69 Bronco/08 Mazda3 Join Date: Jul 2009 Location: Colorado Posts: 305 View My Garage	Patience is a virtue and all good things in time. I will let others burn their cash and wait to find out what works and what does not. __________________ Selection Worksheet - 04/27/09 3300 - 08/03/09 6000 - 08/25/09 VIN# 34612 Bitchin Camaro - Dead Milkmen - http://www.newgrounds.com/portal/view/8092 Thank You Oshawa - Domo arigato Mr. Roboto ~1600 mi so far - 07/18/10

07-14-2010, 10:03 AM	#32
jrpxxii Drives: 2010 Camaro SS/RS 427ci Join Date: Jul 2009 Location: Bowling Green, Ky Posts: 3,355	Please, Im dying for someone to come out with a solution to take more of my money. Now your on the spot, 2 weeks or less. I will be waiting patiently. __________________

07-23-2010, 04:25 PM	#37
jrpxxii Drives: 2010 Camaro SS/RS 427ci Join Date: Jul 2009 Location: Bowling Green, Ky Posts: 3,355	We cant even get pics or specs? __________________

07-24-2010, 06:17 AM	#41
midgard Drives: red jewel camaro Join Date: Aug 2009 Location: Northwest Indiana Posts: 524	Thank You Hendrix....we will put the complete kit to good use just a few days after we get them next week! Did I hear 2000 hp rating? Solid 9's are definitely in the works for me now in about a week or so .......between the boost increase and about 4 or 5 more mods. Power numbers should be coming early next week. Might even have a run by Friday (hopefully after the 9" kit is installed...otherwise a 2nd set of runs probably will be in the works the following week). __________________ 2010 Red Jewel Camaro ss/rs A6/L99 POWER NUMBERS....874 rwhp/880 rwtq!! 9.81@142.02 Livernois 2nd Place Car Camaro5 Fest Original Build 13 psi/nittos.....10.44@134 3.6KB/3.5 pulley/Stock t/b..Best 9.967@142.01 SSJ3...is done....mid 9s?Rossler 6l80E Transmission KB 3.6LC,17" Bogarts, Thanks to Hendrix 9", Thanks to Pfadt original T/b and converter, 419ci stroker (NO LSX Block) Last edited by midgard; 07-24-2010 at 08:16 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Im sure this has been asked before.. But forgive my innocence :)	gmag21	Suspension / Brakes / Chassis	23	02-21-2010 10:29 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM

07-23-2010, 03:45 PM	#36
fastfaster Account Suspended Drives: xxxxxxxxxxxxxx Join Date: Jun 2010 Location: xxxxxxxxxxxxxxxxxxxx Posts: 479	i'm hoping for some pictures too.

07-23-2010, 05:38 PM	#38
600hp-lpe Drives: 2010 Join Date: Jul 2009 Location: NH Posts: 4,788	any word??? or better yet, Pic's of the product?

07-23-2010, 07:24 PM	#40
orange10s.c. Drives: IOM 2SS RS M6 sunroof Join Date: Jul 2009 Location: panama city fl Posts: 5,117 View My Garage	The Hendrix parts are going to be awsome. I got some of the new axles going in next week !!!