Boze Wheels! - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

NOODLESgoneWILD · 03-07-2008, 11:07 PM

Ahh...Excellent choise. i have to admit I thought the rims looked smaller than 18's...but im sure they'll look great once there mounted. Just dont burn the rubber off to quick...those tires are $$$$$

Sinister · 03-08-2008, 12:25 AM

Yes they are alot of $$$$$ but you get what you pay for!

Emu the Foo · 03-08-2008, 01:38 AM

those are some of the best wheels ive seen ina while

*GTAHVIT* · 03-08-2008, 07:21 AM

Quote:

Originally Posted by Sinister

No...I had to check & see for fitment purposes before I mounted the tire on the rim...that way it doesn't void any warranty if I had to send the rim back

Well that makes perfect sense. I've never done that with a set of wheels... Probably should have.

Especially when you pay that much.

Emu the Foo · 03-08-2008, 09:32 AM

how much is pricey? are they HRE pricey? how much do they way too?

SilverTurtle · 03-08-2008, 09:41 AM

Quote:

Originally Posted by Emu the Foo

how much is pricey? are they HRE pricey? how much do they way too?

Toyota Corollas cost less than HREs... so I'm pretty sure that the Boze wheels are less expensive... when I priced them out in 18" for the Firehawk, the were $2400 for the set... 18x9f, 18x10.5r

Emu the Foo · 03-08-2008, 09:45 AM

not bad, but im lookin @ 20's but i like your thinkin on the width.

UPDATE: lol, i never heard of boze but i found out they are right here in my own backyard. i looked at them. i want one piece rims instead of forged ones. is this a medium lip???

Sinister · 03-09-2008, 05:33 AM

The front rims are just the factory offset for the 3rd gen Camaro...the rears have a 6.25 backspacing but you can order them with any offset that you want...if you want a deep lip or not!

Emu the Foo · 03-09-2008, 05:14 PM

im not a deep lip person amd i like the way yours look. thats why i ask.

Jose_The_Great_Cuervo · 03-12-2008, 01:04 PM

Sinister, where did you get that body kit for your Iroc and how much did it cost. It looks bad a$$ man.

Sinister · 03-12-2008, 06:47 PM

Quote:

Originally Posted by Jose_The_Great_Cuervo

Sinister, where did you get that body kit for your Iroc and how much did it cost. It looks bad a$$ man.

There is no body kit on the car...it is factory but the ground F/X, rear spoiler, rear bumper, front chin spoiler is all off a '91-'92 except fot the hood that came from Hardwood

Jose_The_Great_Cuervo · 03-12-2008, 07:05 PM

Nice stuff. I think I saw your camaro on cardomain.

Sinister · 03-13-2008, 03:42 AM

Today my new HID Headlights came in, I will provide a detailed installation if some of you guy's ever decide to go with HID's in the future...that will commence on monday.

I also went to the Tire Shop and picked up my Boze Rims where they had the Toyo T1-R's mounted, balanced ect! The tire sizes are 245/35/18 front & 285/35/18 rear...man are they wide compared to my old one's which were 225/45/17 front & 245/45/17 rear...you can see the difference in one of the pics. I also repainted the brake brackets, center part of the rotors (black) and the calipers (red)...I will upgrade to the Z-06 Calipers probably in the fall or next winter along with an air ride kit & tubular k-member/a-arms!

Here is what has to be done for the correct fitment of a 10" rim with a 6.25 backspacing on a 3rd gen Camaro...first you have to remove the bump stoppers, then you have to cut the inside of the fender which is shown to prevent the tire/rim from rubbing and then you have to massage/hammer the part where the rear seatbelts are held in place (down low where you see the red battery cable running)...mind you I removed mine outta there a while back because no one sits in the back anymore! and there you have it...not that much in modding for the big rims to fit nicely tucked in the fender well, I will post up more pics when the car is on the ground next week!

*GTAHVIT* · 03-13-2008, 07:11 AM

NIIIIIICCCCE!!!!

03-07-2008, 11:07 PM	#15
NOODLESgoneWILD IS IT 2009 YET??? Drives: '05 Z51 Black Vette & '06 H2 Join Date: Dec 2006 Location: Mill Creek, Washington Posts: 408	Ahh...Excellent choise. i have to admit I thought the rims looked smaller than 18's...but im sure they'll look great once there mounted. Just dont burn the rubber off to quick...those tires are $$$$$ __________________ *Don't love me just for my FBod*

03-08-2008, 12:25 AM	#16
Sinister Satan's Boss! Drives: 1985 Z-28/IROC-Z Join Date: Jul 2006 Location: Toronto, On. Posts: 72	Yes they are alot of $$$$$ but you get what you pay for! __________________

03-08-2008, 01:38 AM	#17
Emu the Foo Drives: 92 Cadillac Sedan DeVille S/C Join Date: Feb 2008 Location: Long Beach, CA Posts: 328	those are some of the best wheels ive seen ina while __________________ I JUST WANT MY 400+ HORSES

03-08-2008, 09:32 AM	#19
Emu the Foo Drives: 92 Cadillac Sedan DeVille S/C Join Date: Feb 2008 Location: Long Beach, CA Posts: 328	how much is pricey? are they HRE pricey? how much do they way too? __________________ I JUST WANT MY 400+ HORSES

03-08-2008, 09:45 AM	#21
Emu the Foo Drives: 92 Cadillac Sedan DeVille S/C Join Date: Feb 2008 Location: Long Beach, CA Posts: 328	not bad, but im lookin @ 20's but i like your thinkin on the width. UPDATE: lol, i never heard of boze but i found out they are right here in my own backyard. i looked at them. i want one piece rims instead of forged ones. is this a medium lip??? __________________ I JUST WANT MY 400+ HORSES Last edited by Emu the Foo; 03-09-2008 at 03:08 AM.

03-09-2008, 05:33 AM	#22
Sinister Satan's Boss! Drives: 1985 Z-28/IROC-Z Join Date: Jul 2006 Location: Toronto, On. Posts: 72	The front rims are just the factory offset for the 3rd gen Camaro...the rears have a 6.25 backspacing but you can order them with any offset that you want...if you want a deep lip or not! __________________ Last edited by Sinister; 03-09-2008 at 12:30 PM.

03-09-2008, 05:14 PM	#23
Emu the Foo Drives: 92 Cadillac Sedan DeVille S/C Join Date: Feb 2008 Location: Long Beach, CA Posts: 328	im not a deep lip person amd i like the way yours look. thats why i ask. __________________ I JUST WANT MY 400+ HORSES

03-12-2008, 01:04 PM	#24
Jose_The_Great_Cuervo Drives: Purple/Pink Ford Escort Lx Join Date: Feb 2008 Location: Georgia Posts: 65	Sinister, where did you get that body kit for your Iroc and how much did it cost. It looks bad a$$ man.

03-12-2008, 07:05 PM	#26
Jose_The_Great_Cuervo Drives: Purple/Pink Ford Escort Lx Join Date: Feb 2008 Location: Georgia Posts: 65	Nice stuff. I think I saw your camaro on cardomain.

03-13-2008, 03:42 AM	#27
Sinister Satan's Boss! Drives: 1985 Z-28/IROC-Z Join Date: Jul 2006 Location: Toronto, On. Posts: 72	Today my new HID Headlights came in, I will provide a detailed installation if some of you guy's ever decide to go with HID's in the future...that will commence on monday. I also went to the Tire Shop and picked up my Boze Rims where they had the Toyo T1-R's mounted, balanced ect! The tire sizes are 245/35/18 front & 285/35/18 rear...man are they wide compared to my old one's which were 225/45/17 front & 245/45/17 rear...you can see the difference in one of the pics. I also repainted the brake brackets, center part of the rotors (black) and the calipers (red)...I will upgrade to the Z-06 Calipers probably in the fall or next winter along with an air ride kit & tubular k-member/a-arms! Here is what has to be done for the correct fitment of a 10" rim with a 6.25 backspacing on a 3rd gen Camaro...first you have to remove the bump stoppers, then you have to cut the inside of the fender which is shown to prevent the tire/rim from rubbing and then you have to massage/hammer the part where the rear seatbelts are held in place (down low where you see the red battery cable running)...mind you I removed mine outta there a while back because no one sits in the back anymore! and there you have it...not that much in modding for the big rims to fit nicely tucked in the fender well, I will post up more pics when the car is on the ground next week! __________________ Last edited by Sinister; 03-13-2008 at 04:05 AM.

03-13-2008, 07:11 AM	#28
GTAHVIT Blessed Drives: 2013 Sonic RS MT Join Date: Dec 2007 Location: Saint Augustine FL Posts: 28,444 View My Garage	NIIIIIICCCCE!!!! __________________ Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals."

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Camaro photoshop with beefier front end, drop and smoked wheels	Tran	Camaro Photoshops / Renderings Forum	60	10-25-2010 06:02 PM
What do you guys think of these wheels?	RODTANA	Wheels and Tires Talk Sponsored by The Tire Rack	29	10-01-2009 12:37 PM
New Hot Wheels die cast	TAG UR IT	Camaro Photos \| Spyshots \| Video \| Media Gallery	19	02-17-2008 11:57 AM
First look: 'Speed Racer's' demon on wheels	KILLER74Z28	General Automotive + Other Cars Discussion	5	06-01-2007 11:01 PM