|
|
#183 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: Current Camaro-less Join Date: Jul 2014
Location: Oregon
Posts: 3,241
|
I kind of view this as the old days when you could get a 70 Challenger optioned out with a 440 Six Pack, 4 speed manual, 4.10 gears and no options..pretty much designed with one purpose in mind.
Daily driver livable? Nope |
|
|
|
|
|
#184 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,332
|
heck the outboard cars did not have changeable jets, ya had to solder and drill... I had a 440 Dart since high school, just gave it to my buddy from HS as I had no time or room for it. We shared the car for many decades. Loved the 6 pack but really with the performer RPM or M1 mopar performance are better setups... note that the 6 packs had some crazy cross ram setups..
I can't imagine how hard it would be to get this setup running in the north with the temp changes with non jettable carbs...
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
|
|
|
|
|
#185 | ||
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,332
|
Quote:
Quote:
I just attended the first season autoX, the factory 1LE 2017 was absolutely totally completely destroyed by stock Miatas, FRS, Civic SI et all... So dunno, clearly the 6th gen is dominant on long road races, I personally doubt this equates to an equal gap in street manners. Street fun um both the Challenger and Camaro are fun, both are traction limited, the Camaro has an edge but not enough to really make up for the compromises for many. 1st) The Dodge can be had in 4 door and the Charger is IMO a clearly better car than the SS 2nd) The Challenger has WAY WAY WAY WAY WAY better ride from stock to crazy stiff suspension. 3rd) The Challenger has seating for 5 and can actually sit 4 reasonably size adults. My kids can't even fit in the back of the Camaro... so really it is a 2 seater. 4th) both cars are traction limited in all aspects. The Camaro can brake harder and later into a turn...but NEITHER car can take throttle out of the turn and neither car can be safely driven without traction control. Power on and WOT is completely unavailable with both rides sans traction control in terms of long term use. yes I'm sure there are real men that are exiting corners all the time with no traction control, but we all know that is pure fantasy. My 6th gen is completely and totally traction limited unless completlye straight with completely stable chassis ( no transitions like from a corner exit) and completely smooth shifting and needs a slow application of throttle... ie a lot of work. So is the 6th gen a faster / quicker DD, um neither can be driven sans traction control.. I have about 1000 or 1500 blast upto 75 MPH on my 6th gen, I'm pretty confidant I have evaluated the true street manners of the Camaro... bout 5000 to 10,000 blast upto 75 ish on my Challengers... The last autoX from last year was at a road race track. The RWD driven by Joe Average, were in general all over the place and that included the weeds, cause many or all of us "racers" can't handle little hills and dipps on a RWD platform... you know like the REAL ROAD. I don't get how you switch from the Demon as impracticable, to all Challengers and now to all Fiats... dunno.
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
||
|
|
|
|
|
#186 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,332
|
Quote:
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
|
|
|
|
|
|
#187 | |
![]() ![]() Drives: 1992 Z28 1LE; 2015 Zl1 Join Date: Mar 2009
Location: Madisonville, LA
Posts: 866
|
Quote:
![]() ![]() I'll agree with the people who said the challenger is the best daily driver of the three. The new Demon will clearly not be a great daily driver. Very cool that they are making it though. It will certainly be a collectors item for those that purchase one. I hope they make enough of them that I can actually see one at the drag strip.
__________________
1989 Camaro RS convertible- Sold
1999 Camaro SS - Stolen 2x 1991 Camaro Z28- 1991 Camaro Z28 1LE- 1992 Camaro Z28 1LE- 25th anniversary 2015 Camaro ZL1 |
|
|
|
|
|
|
#188 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: Current Camaro-less Join Date: Jul 2014
Location: Oregon
Posts: 3,241
|
Keep in mind Fen is likely talking about compacts and midsize cars (IE the former Dart/Avenger/200 etc).
|
|
|
|
|
|
#189 | |
|
マスタング = 遅い
Drives: 2017 Chevrolet Camaro SS 1LE Join Date: Aug 2015
Location: Florida
Posts: 7,061
|
Quote:
|
|
|
|
|
|
|
#190 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,332
|
Quote:
um I think the last autoX the 1le was like 8 seconds behind the SI, the beat out RSX and the stock Miata... and within .5 second of a pair of Challengers (V6 and SRT), results are not posted yet... soon. Autox will be in full swing over the next two weeks.. Don't need to address ride, the Challenger has a much better ride, from stone stock to crazy stiff. Room, nope don't need to address that either... Can the M6 which we both have exhibit controllable behavior? Yep bone stock, I was really impressed with the behavior of the M6, no problem power shifting thru the gears, straight balance chassis. Add full bolt ons and the car can't take wot in 1st and the a good portion of 2nd... if not all of second.. that is in a straight line, try to apply anything approaching WOT throttle during transit response or on turn exit means it is ditch time...
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
Last edited by oldman; 02-02-2017 at 04:04 PM. |
|
|
|
|
|
|
#191 | ||||||
![]() Drives: 2SS & GT Premium Join Date: Jan 2017
Location: Southern Cali
Posts: 100
|
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
|
||||||
|
|
|
|
|
#192 |
![]() Drives: 2SS & GT Premium Join Date: Jan 2017
Location: Southern Cali
Posts: 100
|
|
|
|
|
|
|
#193 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: Current Camaro-less Join Date: Jul 2014
Location: Oregon
Posts: 3,241
|
oldman...
When you say "SS" are you meaning a Camaro SS or the Chevrolet SS? Thanks GM for making that a confusing and utterly stupid name. |
|
|
|
|
|
#194 |
![]() Drives: 2SS & GT Premium Join Date: Jan 2017
Location: Southern Cali
Posts: 100
|
|
|
|
|
|
|
#195 |
![]() ![]() ![]() ![]() ![]() ![]() Drives: 2017 SS 1LE, 2016 1SS (previous) Join Date: Apr 2016
Location: Metro-Detroit
Posts: 1,869
|
Not sure if you knew, as it wasn't a widely publicized thing, but Chrysler used to offer "Core" models of their SRT vehicles. Essentially, an SRT with none of the creature comforts and what not.
|
|
|
|
|
|
#196 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,332
|
my road racing experience is rather limited but I have hundreds of autoX and 1000s of 1/4 mile. Never said I'm a professional, but clearly I can compare how two chassis that I own or owned over 8 years.
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|