05-04-2011, 04:59 PM | #1 |
Drives: 2011 2LT IBM / SIM stripe 6M Join Date: Apr 2010
Location: STL
Posts: 863
|
6th gen Camaro speculation?
We seem to be in a bit of a Camaro lull with knowing most of what the 2012 model is going to be. Let's speculate when everyone thinks the Gen6 will come out. I'm all for a short (five years) Gen5 model run.
I think the Gen6 will come out in the new Alpha platform in 2015. The new CTS on the Alpha platform is scheduled for the 2013 model year. So I'm going with 2015 as the first Gen6 Camaro. They'll need to keep it fresh with a new oncoming Mustang and more stringent CAFE requirements. |
05-04-2011, 05:04 PM | #2 |
Drives: 2013 Fiat 500 Abarth Grigio Join Date: Apr 2011
Location: Manassas, Va
Posts: 3,124
|
Well it is gonna be on the alpha platform but its gonna be smaller cause since caddy is gonna have a smaller/compact car off of the same platform. Prolly a smaller v8 engine as well prolly will keep the 3.6 and add a turbo 4 for mpg reason. Style will differ slighty since this looks so great already hard to tweak it and make it better and better looking.
|
05-04-2011, 05:06 PM | #3 |
General Motors Aficionado
Drives: 2023 GMC Canyon, 2020 Colorado Join Date: Aug 2008
Location: Florida
Posts: 37,371
|
Alpha-based CTS won't be a 2013 model. Probably a year or two later.
ATS, on the other hand, might be available by the end of next year...provided everything goes well...
__________________
2023 GMC Canyon Elevation 2020 Chevrolet Colorado W/T Extended Cab (State-issued) |
05-04-2011, 05:18 PM | #4 |
Account Suspended
Drives: SuperCharged 2SS/RS IOM MN6 Join Date: May 2009
Location: CA
Posts: 5,094
|
I hope it can fly by then.
|
05-04-2011, 06:18 PM | #5 |
Drives: 2010 Camaro LS 2009 Challenger SE Join Date: Jun 2009
Location: Phoenix, AZ
Posts: 81
|
|
05-04-2011, 06:20 PM | #6 |
Drives: 2010 Black Camaro 2SS/RS Join Date: Aug 2009
Location: USA
Posts: 1,880
|
__________________
--
My boyfriend don't mind it. |
05-04-2011, 06:50 PM | #7 |
Drives: 2011 2LT IBM / SIM stripe 6M Join Date: Apr 2010
Location: STL
Posts: 863
|
|
02-06-2013, 07:37 PM | #8 |
Drives: 2010 Chevy Camaro 2LT / RS / Auto Join Date: Jan 2010
Location: Rutherford, NJ
Posts: 905
|
Here is my suggestion to GM Design team
|
02-06-2013, 10:03 PM | #9 |
Drives: Camaro's, always have, always will. Join Date: Oct 2010
Location: Home of the brave
Posts: 4,851
|
...cool, but take some time and do something perhaps with photo shop to the closed off grill and lower valence vents...to open them up and do something...both are closed off.
__________________
In Scott We Trust...all others must show proof.
|
02-07-2013, 07:02 AM | #10 |
Founder - Michigan FBody
Drives: 1994 Camaro LT1, 2012 Camaro 2SS/RS Join Date: Jun 2008
Location: New Haven, MI
Posts: 2,599
|
Sorry, but please don't quit your day job.
__________________
2012 Camaro 2SS/RS L99 - "Zooma"
1994 Camaro LT1 A4 - "Red Alert" - v6-to-LT1 Swapped Cruiser; Cammed, Stalled, Enjoyed "Gone But Not Forgotten" 2016 Camaro 1LT A8 - "Elmo" 2014 Camaro 1LT M6 - "Cherry Bomb" 2012 Camaro 1LS M6 - "Clifford" Michigan FBody Association http://www.mifbody.com/ |
02-07-2013, 10:03 AM | #11 | |
Drives: 2010 Chevy Camaro 2LT / RS / Auto Join Date: Jan 2010
Location: Rutherford, NJ
Posts: 905
|
This is my day job ! and it was already approved on the 2012 Camaro Design Competition finalists !
http://www.cardesigncontest.com/gm/c...php?disp=about Sorry you did not like it ! and you're maybe the only one Last edited by horizon670; 02-07-2013 at 10:50 AM. |
|
02-07-2013, 01:45 PM | #12 |
Drives: 2010 Camaro Join Date: Mar 2011
Location: Colorado
Posts: 412
|
Here's my speculation on looks...
Ehhh....2 Minute Render. |
03-12-2013, 11:25 PM | #13 |
Drives: 2010 CAMARO 2SS/RS Join Date: Jun 2010
Location: RGV TEXAS
Posts: 371
|
That's the best rendering I've seen yet. Congratulations!
__________________
|
03-13-2013, 12:56 AM | #14 |
ITZ COOL
|
[QUOTE=Sorry you did not like it ! and you're maybe the only one[/QUOTE]
Nah, he is not the only one. |
|
|
Post Reply
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PEDDERS SUCCESSFULLY FITS 305s ON ALL 4 CORNERS! | Info@PeddersUSA.com | Suspension / Brakes / Chassis | 467 | 06-11-2013 09:45 PM |
Official Camaro Convertible CONCEPT Press Release | Tran | Camaro Convertible Forum | 12 | 11-18-2009 07:05 PM |
The DEFINITIVE EXPLANATION OF CAMARO SUSPENSION, ISSUES, AND UPGRADES | Info@PeddersUSA.com | Suspension / Brakes / Chassis | 106 | 10-19-2009 06:08 PM |